Samsonite Guardit 2.0 reinvents the core functionality of personal mobility with a brand new design, combining the convenience of an everyday laptop-carrying bag with an even sleeker and professional
RAM 1.5" Ball Mount with SHORT Length Double Socket Arm & Bosch Base. Weight: 440g (0.97 lbs)
RAM-201U arm with double u-bolt, and RAM-202U ball base plate.
The RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade...
Marine grade aluminium plate with a 1.5" C sized ball.
Aluminium rail strap holder with a 1.5" (38mm) rubber ball.
Aluminium strap with C-sized 1.5 inch ball. The strap will accommodate rails from 0.5" to 2" in diameter.
RAM® Universal Marine Electronic Plate with C-Size Ball Universal marine electronic plate includes a variety of pre-drilled holes that match a wide range of devices Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows...
Universal clamped mounting with rectangular and round plates, longer clamp section than standard clamp. The RAM-111-D flat surface drill down mount with long arm consists of the 1.5 inch diameter ball and socket system with RAM universal rectangular 6.25 x 2 inch base. The rectangle base has many...
Plates, ball and clamp system with standard 1" male radio thread for mounting antennas. Cast-aluminium.
The RAM-114-NBU, high strength composite fishing rod holder and 6" spline post, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Standard floor mount assembly mentor with 9" pole.
C size clamp with 1/2" female NPT thread at 180deg. The single socket can connect to any 1.5 inch ball accessory. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible with other NPT parts of the same size.
Clamp arm with 180 degree extension with pipe socket.
The RAM-201-SU consists of a 1.5" dia. ball compatible STANDARD LENGTH double socket arm, mixed combination Pin-Lock security nut and key knob. RAM Pin-Lock security solutions are designed to withstand the harshest environments where RAM Mounts are commonly used. With an emphasis on aesthetics and...
RAM C Size 1.5" Fishfinder Ball Adapter for the Lowrance Hook2 Series About: Designed for light duty use, this C size (1.5") ball base kit for the Lowrance Hook2 allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance...
1.5 inch (38mm) diameter rubber ball, connected at right angles to a 2.5 inch diameter round base with a centered 1/4 inch standard camera adaptor thread.
Camera base consists of a 1.5 inch (38mm) diameter rubber ball, connected at right angles to a 2.5 inch diameter round base with 3/8 inch-16 stainless steel male thread.
The RAM-202SU consists of a 1.5" diameter rubber ball connected to a steel flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Specifications: Material: Powder Coated Stainless Steel Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number...
RAM® Round Plate with Ball The RAM-202 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
The RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.