Audio & Video Accessories bose soundbar | Compare Prices & Save on shopping in Australia
Showing 1 - 1 of 1 results for

Audio & Video Accessories bose soundbar

Sort:
  1. High-quality steel bracket, designed to provide unobtrusive horizontal wall mounting of your Bose soundbar. Suits Soundtouch 300 Soundbar ONLY
    $69.95
    + Shipping
  2. More results from our partners
    Highlights LUMI FLC-82 AUDIO 8” 3-way Stereo Frameless Ceiling Speaker. RMS Power 80W. Frequency Response Dimensions: 32cm x 31cm x 11cm Weight: 2.7kg
    $90.16
    + Shipping
    Feature: Using high temperature resistance, light weight KAPTON voice coil, while providing a strong power output, durable. Designed for the installation of the car environment to ensure that audio directivity, so that the attenuation of high frequency to very low. The use of gradient cross-section, made of high-grade rubber ring, greatly out of the bottom of the distortion, is a more sense of low-frequency, sound more pure. Specification: Type Electromagnetic type (reed) Size (DxH) Approx. 16.5x7cm/ 6.5x2.76 Shape Round Voltage 12V Directivity 100 Signal To Noise Ratio (SNR) 90 dB Rated Power 80W Rated Impedance 4 Sensitivity 80 dB/ W Frequency Response 25-86 kHz Application Loud speaker Diaphragm Material Non-paper Composition Coaxial compound Magnetic Circuit Form External magnetic type Frequency Characteristics Midrange frequency Package Included: 2 X Car Speakers 2 X Connection Lines 8 X Screws
    $40.62
    FREE shipping
    Feature: 4 inch coaxial 2 way bass speaker. Perfect combination of various audio and video. No need for external power amplifier or play. Specification: Color: Black + Orange Model: GX-481 Size: 4 inch Maximum power: 250W Rated power: 30W Impedance: 4 ohms Sensitivity: 90dB (1.5dB) Frequency response: 40HZ-25KHZ Package Included: 2 X 4 Inch Car Speakers
    $43.33
    FREE shipping
    Specification: Voltage: 12V Resistance: 4 Rated power: 60W Voice coil: 20mm ASV Sensitivity: 88 dB/ W/ M Frequency: 80-20 kHz Magnetic circuit specification: 4.3oz Bass drum paper: Paper carcass Diaphragm material: Foam side Size (DxH): Approx. 10.2x4cm/ 4.02x1.57 Wire length: Approx. 90cm/ 35.43 Applicable to all car models, designed for the installation of the car environment to ensure that audio directivity, so that the attenuation of high frequency to very low. Package Included: 2 X Car Speakers 2 X Connection Wires 8 X Screws
    $23.01
    FREE shipping
    The Halco Max is an extremely versatile lure, offering the angler the choice of casting, trolling or jigging. The Max weighs in at 85 grams, so casting long distances is made easy. It can be trolled at speeds up to 12 knots, with very little resistance, a
    $14.95
    + Shipping: $10.00
    Set Of 2 Maxturbo Car Speakers W/ Led Light 500w
    $43.90
    + Shipping
    European glassware. Made in Poland. Gift Boxed
    $49.95
    + Shipping
    The PAVINA salad bowl is the perfect foundation for a healthy lifestyle as it shows any wonderful salad creation in the most mouthwatering light. It’s made from borosilicate glass, which is very strong and never clouds, not even after years of dishwasher use. The silicone band wrapping the bowl makes the bowl slip-proof and gives any table a cheerful touch of color.
    $19.95
    + Shipping
    Car Port Base 2 Holes - Set of 4
    $86.90
    + Shipping
    The Halco Max is an extremely versatile lure, offering the angler the choice of casting, trolling or jigging. The Max weighs in at 85 grams, so casting long distances is made easy. It can be trolled at speeds up to 12 knots, with very little resistance, a
    $14.95
    + Shipping: $10.00
    Audiocenter TS12 2-way Active DSP Controlled Full Range 12 Loudspeaker The TS12 is suitable for touring and fixed installation requires clean and clear sound such as multi-functional meeting room, lecture hall, conference center, house of worship, museum, speech, stage monitor, entertainment, wedding ceremony, etc. The HF driver of TS12 is customized BEYMA driver with composite membrane (1.75 voice coil), and the LF driver is customized BEYMA 12 driver (3 voice coil). 5 presets (AC, Linear, Boost, Vocal, W/SUB) are available for the users choosing via buttons on the back panel according to their needs. All the connectors are also on the back panel. There is integrated input interface for 2-way XLR or Mono jack 6.35 in TS12. CHA can parallel input signal from microphone and circuit by switcher. Besides, there is a RCA port for connecting MP3, CD player, etc. The three different audio sources can be parallel output with one-way XLR after internal mixing, and then transmit the signal to different speakers for cascading distribution of signal. TS12 speaker is symmetric woody design. The 45 slope and CNC made cabinet are fashionable and elegant. The color of the cabinet can be customized. On the top of the cabinet, there is a customized aluminum ergonomic handle, and it can be installed with U bracket or three-feet sustain frame directly. The rubber mat at the bottom is against sliding. TS12 can be either installed in lateral or vertical plane by using vertical U bracket, horizontal U bracket or single-point bracket. Also, it can be ground standing by coupling bar or three-feet sustain frame. The accessories for TS12 can match the needs of different installation environments. Features : DSP signal control with 96KHz signal sampling frequency, 56bit precision 5 presets to meet different requirements Class D digital amplifier from PASCAL and switch mode power supply technology Optional standby time (2mins/5mins/15mins/off) if without signal input Customized BEYMA driver from Spain HF horn design with DMF composite materials, coverage angle 90 rotatable Advanced natural cooling system Optimized, compact, multi-functional cabinet design and comprehensive accessories for convenience and flexibility CNC made cabinet of excellent wood Ergonomic handle for convenient transport and easy installation Specifications: Power handling RMS: 1200W Max SPL /1M Continuous: 125 dB Consistency: 1,5dB (150Hz 10 KHz) Fequency Response: (-6dB): 45Hz-20 kHz Cabinet Construction: CNC made cabinet Base mount: 2 base holes 35mm at the bottom HF Component: Customized Beyma HF drivers, ferrite, 1 exit, 1,7 voice coil LF Component: Customized Beyma LF drivers, ferrite, 3 voice coil Dimensions: (WxHxD)mm: 358 x 633 x 326 Weight: 18.3kg Manual
    $679.99
    + Shipping
    Marani DPA-2448QR-T - 2-IN / 4-OUT Digital Speaker Management System The DPA-2448QR-T is a DSP management system that offers high quality 24-bit digital EQ processing and matrix routing of 2 IN and 4 OUT channels. The DPA-2448QR-T provides the functionality of an external crossover and EQ for main FOH speakers. The highly versatile and configurable EQ options allow control over both the input and output channels. In-built crossover filters with slopes such as Butterworth and Bessel make it simple and setup a basic tune. The DPA-2448QR-T can connect to any computer via USB to run the software control application, allowing you to control all parameters via a computer connected via USB. Speaker Processing - LAN and USB Controllable With its Matrix routing capabilities, the DPA-2448QR-T is capable of being used as a Stereo 2-way or crossover for PA systems running subwoofers. Two outputs are routed to one input, and then a 7 Filter Parametric EQ is used to create the frequency slopes, notches and add high/low pass filters for the signals being sent to the sub and FOH / top speaker. Other parameters such as gain, noise gates, compression can then be applied to each output, or input as desired. The DPA-2448QR-T is easily controlled by a computer running Marina's DSP control software which can be connected via a USB or LAN connection. Parametric EQ - Controlling Foldback Monitors The DPA-2448QR-T can be used as a detailed EQ, say on foldback sends etc. Sometimes giving a musician a customised EQ for their foldback, is just as important as getting the levels right in their AUX send. A simple boost to the right frequencies can lift the particular musicians sound out from the mix, whilst not removing the other performers. RMS Compressor and Peak Limiter Using the RMS compressor can help control energy levels in a venue and maintain a more constant SPL. The Peak Limiter can be used to protect the amps and speakers from signal peaks caused by DJ's and untrained venue users. Configurable Delay A configurable delay is available on each channel, adjustable in 21us increments / decrements. The delay feature is useful for 'delay towers' at large concerts, or in venues where speakers are vastly separated. A finely tuned delay configuration ensures speakers are 'in phase' with each other in the desired listening spaces. Features: Outstanding Performance Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate 2 inputs, 4 outputs with full matrix mixing Top-grade DSP Engine 5 band parametric equalization per input channel 7 band parametric equalization per output channel Each band can be switched to Bell, Low/High Shelving, Low/High-Pass, All-Pass, Band-Pass and Notch Low/High Shelving, Low/High-Pass, can be selected as 1st and 2nd order, variable Q response Crossover filters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel, Linkwitz-Riley and customizable topologies Each output features a precision dynamic range controller composed of a Peak Limiter and a RMS Compressor with selectable ratio and variable knee Adjustable Delay time up to 850 ms for every input and output channel Phase correction per output channel Direct PC/Network Connection Front panel USB connector for direct PC communications Ethernet interface for system setup, monitoring and control via fully manageable remote PC software Control Front panel interactive LCD display for local access and configuration Front panel 7-LED level meter indicators per channel Simultaneous control up to 32 units via PC software Up to 64 storable user presets Security Lockout Specifications: Audio Analog Input 2 x XLR electronically balanced Analog Output 4 x XLR electronically balanced Digital Input 1 SPDIF; Gain 0dBu Minimun Load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >110dBA Frequency Response 20Hz 20kHz; -0.5dBu at 20Hz and 20kHz AD & DA Converters 1x AK5388 24bit, 2x AK4396 24bit DSP & Processing DSP E
    $499.99
    FREE shipping
    Feel every bass note as deeply and powerfully as possible with the top-of-the-line subwoofer from the Andrew Jones speaker range. Feel every action scene or party tune with earth-shaking bass 30cm driver unit Fantastic value for money Boasting 30cm driver units that truly produce an unrivalled audio experience, this Pioneer Bass Reflex Powered Subwoofer delivers the bass you’ve always dreamed of at a surprisingly affordable price.
    $349.00
    + Shipping
    If you want to give your home listening and viewing experience some extra punch, the compact Pioneer 100W Subwoofer is your solution for more bass. Integrating a 100W RMS amplifier and enclosed with a ‘down-fire’ bass-reflex type cabinet, the Pioneer 100W Subwoofer (S-21W) ideally supports speaker configurations from 2.1 to 5.1. Phase Control technology manages the time and phase response of the speakers to minimise the effect of additional sound delays usually due to the filtering process of multi-channel recordings.
    $299.00
    + Shipping
    Highlights Lumiaudio FLB-6W 6” 2-way Moisture Resistant Frameless Recessed Ceiling Speaker. 60W RMS Frequency Respone 55Hz-20kHz Impedance 8ohms Overall Dims 227®x88mm. Dimensions: 30cm x 30cm x 5cm Weight: 2.0kg
    $67.19
    + Shipping
    Highlights Infinity Reference 152 2-Way 5.25” Speakers by Harman Kardon Dimensions: 47.5cm x 39cm x 43.5cm Weight: 13.5kg
    $315.64
    + Shipping
    The MQS75 is designed to be conntected between mics and the mixer. Each mic channel on the MQS75 has both phantom power and low-frequency cut selectable via DIP switches plusa level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitorcan be connected to the Phono/Aux output. If AC power is notavailable, the MQS75 runs on batteries as well as with an ACadaptor (optional). Specifications Max Output Level: Balance: +18dB Unbalance: +12dB Max Input Level: Balance: +22dB Unbalance: +22dB Input Impedance: RCA 100KU/XLR 10KU Output Impedance: RCA 100U/XLR 100U balance Noise Floor: -88dB Gain: +4dB In: -8Db -10dB In: +20dB THD: 0.003% Power: 12V DC/ 150mA adapter Dimension: 143× 93× 45 mm Weight: 527g
    $89.00
    + Shipping
    LB-PS1501D 5 inch Full Frequency Car Speaker 88db Car Horn Specification: Model LB-PS1501D Impendce 4 Frequency respond 80-12KHZ Sensitivity 88DB Peak output power 50W RMS 25W Magnetic 60*8, ferrites Drum paper Paper carcass Diaphragm Sponge Woofer voice coil 20mm ASV Package Included: 1 X Car Speaker
    $27.08
    FREE shipping
    Specifications: Resistance: 4.7 ohm, Type: 1 pin PTC start relay Color: Black Material: Metal, Plastic Size: 28x21x30mm 4- FR Envelope 8 - Padded FR Envelope 15- Regional BoxA 20- Medium FR Box NOTE: Replaces only QP2-4.7 applications and is not intended to replace any other applications. Package Included: 1 x Refrigerator Start Relay More Details:
    $2.96
    FREE shipping
    Feature: 1. A plurality of radiating holes are arranged on both sides to ensure the heat dissipation and avoid the sound box burning. 2. Has a professional single channel power amplifier template, including bass filter, bass enhancement, high-frequency power controller, remote control by wire and other high-end functions. 3. All aluminum alloy body, to minimize vibration caused by noise, to ensure that in a long time, high load performance in the environment stable and reliable. Specification: RMS Power: 200W Max Power: 600W Frequency response: 50 HZ 150Hz Impedance: 4 Voltage: 12V Signal/Noise ratio: >91 dB Material: Aluminum alloy T.H.D: <0.2% Bass boost: 0dB-12dB Fuse: 25A Net Weight of the Speaker: About 4913g Package Included: 1 X Speaker 1 X Remote Control 1 X User Manual 1 X Wire Kits
    $170.66
    FREE shipping
Back to top

Recently Viewed Audio & Video Accessories


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.