Audio & Video Accessories mixvibes u mix44 4 | Compare Prices & Save on shopping in Australia
Showing 1 - 24 of 289 results for

Audio & Video Accessories mixvibes u mix44 4

Sort:
  1. Compatible with all TV and radio signals, including digital and satellite Low-noise amplifier Four-way splits for TVs throughout the home 10dB gain per split, to ensure no signal loss when splitting Inbuilt short-circuit protection Double insulation Plug-and-play installation CE, EMX, LVD and ROHS certification 12-month Australian warranty
    $59.00
    FREE shipping
  2. This high performance system will distribute audio from two sources to four zones in any combination, along with independent volume control for each output. Designed to the highest quality standard, this premium 4 Way Speaker Switch will deliver pristine audio.
    $249.00
    FREE shipping
  3. This 4 Way HDMI Splitter will duplicate and amplify the signal on all four outputs. Features extreme bandwidth of 340MHz to provide support for stunning Ultra HD 4K resolution. This device is the perfect solution to connect up to 4 displays from a single source device.
    $49.95
    + Shipping: $6.95
  4. Surge protection: 3 x metal oxide varistors Max Voltage: 4500VAC Capacity: 200 Joules Max Rating: 10amp Max Power: 2400W
    $18.00
    + Shipping
  5. Aten VanCryst VS184B 4 Port True 4K Splitter. HDMI 2.0, HDCP 2.2. Support HDR. Up to 4096 x 2160 / 3840 x 2160 60Hz (4:4:4 8bits) Only from PBTech
    $270.85
    + Shipping
  6. ATEN VanCryst VS461 4 Port DVI Video Switch Only from PBTech
    $198.03
    + Shipping
  7. DIGIMATCH 17MMC426 TAP CATV 1Ghz 4 WAY Short Description Tap CATV 1Ghz 4 Way 26dB ChannelsPerimeters 26dB MATV Brand Matchmaster
    $3.85
    FREE shipping
  8. Synology [Adapter 100W_1 /100W_2] Spare Adapter 100W for 4-Bay NAS
    $99.00
    + Shipping
  9. Printable Surface DVD-R allows you to print directly onto DVD-R discs using direct printing inkjet printers, providing a professional disc print. Transfer home movies from VHS or 8mm cassettes and large files. DVD media allows the preservation of your favourite videos, precious photos and valuable data. Features Available in 10pcs/pack Up to 16x write speed Bright, high-quality, white inkjet printable Bonus- Includes Memorex DVD Marker Product Contents 5 Packs x DVD-R discs
    $50.95
    + Shipping
  10. The VS184A HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to four displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays.The VS184A HDMI Splitter is HDCP (High Bandwidth Digital Content Protection) compliant, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings.Connects one HDMI source to four HDMI displays at the same timeHDMI (3D, Deep Color, 4kx2k); HDCP CompatibleSupports resolutions of up to Ultra HD 4kx2k and 1080p Full HDSupports Dolby True HD and DTS HD Master AudioLong distance transmission – up to 15 m (24 AWG)Supports up to 340MHz bandwidth for high performance videoPlug-and-play – no software installation required
    $260.95
    + Shipping
    (18% Off)
  11. Jabra Ear Cushion For Biz 2400 Series (4 pack) Only from Simply Headsets
    $29.00
    + Shipping: $9.95
  12. Four Channels of Tone-Blending “Twin-Finity” Preamps and 1176-Style Compression with Built-In A/D Converters The Universal Audio 4-710d is a boutique quality, four-channel microphone/line preamplifier with unique tube and solid-state tone blending capabilities — perfect for a wide range of microphone and instrument sources. This versatile multi-channel preamp offers selectable 1176-style compression circuitry on each channel, plus four additional line inputs feeding eight channels of pristine analog-to-digital conversion. Building upon UA’s classic analog design approach, combined with smart modern features, the 4-710d is the most flexible preamp in the UA lineup. At the core of the 4-710d are four channels of tone-blending “Twin-Finity” mic preamps with true-bypass 1176-style compression, including specially tuned "fast" and "slow" settings. Each of the four mic preamp channels allows for continuously variable phase-aligned tone, between a 100% tube and 100% solid-state signal path. Send and return jacks are available for external processing or signal access. The eight analog inputs are digitized via ultra high-quality 24-bit A/D converters at selectable sample rates up to 192 kHz. Digital output is available via dual ADAT “lightpipe” or AES/EBU DB-25 connectors, facilitating integration with most popular audio interfaces. Features Four TEC Award-winning 710 Twin-Finity™ microphone/line preamps, each featuring: Dual-path 285-volt Class-A tube and transimpedance solid-state preamps Phase-aligned tone-blending of tube and solid state circuits, creamy to crunchy Newly designed 1176-style compression circuit per preamp channel JFET Direct Input with 2.2MΩ ultra Hi-Z impedance w/auto input override Large backlit VU meters for flexible metering of input drive, gain level, and gain reduction Balanced send/return inserts (half-normalled) 48V phantom power 75 Hz low cut filter Polarity switch Monolithic balanced ou
    $3,299.00
    FREE shipping
  13. MQS37 MIXER Specifications: CH1 : 1/4 unbalanced jack for receiving line or instrument level signals. CH2 : Stereo RCA input for receiving line level signals. CH1 max. gain: 32dB CH2 max. gain: 20dB CH1 input impedance: 10K Ohms CH2 input impedance: 20K Ohms Output impedance: 50 Ohms Power: 12V DC /150mA adapter (Supplied) Dimension: 95 × 73 × 40mm Weight: 229g Feature: Use for mixing vocals and/or instrumentals from one mixer with recorded music, then send it all to one channel on a PA, broadcast or recording mixer Each channel has a volume control The MQS-37 is a two-channel mixer for mixing a 1/4 line signal such as a wireless microphone, and a stereo RCA signal such as a CD player. Download the MQS37 Manual (125KB PDF File)
    $55.00
    + Shipping
  14. MQS37 MIXER Specifications: CH1 : 1/4 unbalanced jack for receiving line or instrument level signals. CH2 : Stereo RCA input for receiving line level signals. CH1 max. gain: 32dB CH2 max. gain: 20dB CH1 input impedance: 10K Ohms CH2 input impedance: 20K Ohms Output impedance: 50 Ohms Power: 12V DC /150mA adapter (Supplied) Dimension: 95 × 73 × 40mm Weight: 229g Feature: Use for mixing vocals and/or instrumentals from one mixer with recorded music, then send it all to one channel on a PA, broadcast or recording mixer Each channel has a volume control The MQS-37 is a two-channel mixer for mixing a 1/4 line signal such as a wireless microphone, and a stereo RCA signal such as a CD player. Download the MQS37 Manual (125KB PDF File)
    $55.00
    + Shipping
  15. The newly redesigned Master1 and Reference1 cartridges have had their coil design reconfigured and the effective moving mass of their generating system has been reduced by 17 . All this is hand-assembled within a machined new processed Australian Jarrah wood housing. Description Features Specifications The Master1 and Reference1 models use a five piece OTL cantilever technology achieving an additional 5 tip mass reduction over the Platinum1 and Sonata1 models. The coils are wound with ultra-high purity long crystal UHPLC oxygen free copper wire. The Master1 model is mounted with Grado s specially designed nude elliptical diamond and the Reference1 model uses Grado s true ellipsoid design diamond. Re-configured coil reduced mass by 17 Five piece cantilever technology achieves 5 tip mass reduction over Platinum and Sonata models Nude elliptical diamond Frequency Response 10-60 000 Hz Principal Moving Iron Imput Load 47K Output at 1KHz 5CM sec 0.5mV Recommended Tracking Force 1.5 Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F Factory F Mounting Half Inch Weight 6.5
    $1,449.00
    FREE shipping
  16. The newly redesigned Platinum1 and Sonata1 have had their coil design reconfigured and the effective moving mass of their generating system has been reduced by 17 . Description Features Specifications All this is hand-assembled within a machined new processed Australian Jarrah wood housing. The Platinum1 and Sonata1 models use a modified four piece OTL cantilever technology achieving a 10 tip mass reduction over the Prestige series and ultra-high purity long crystal UHPLC oxygen free copper wire in the coils. The Platinum model uses Grado s specially designed elliptical diamond mounted on a brass bushing and the Sonata model uses Grado s specially designed nude elliptical diamond. 4 piece cantilever technology with UHLPC wire in the coils Reduced moving mass by 17 Hand Assembled using Australian Jarrah Wood Housing Frequency Response 10-60 000 Hz Principal Moving Iron Input Load 47K Output at 1KHz 5CM sec. 5mV Recommended Tracking Force 1.5 Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement F Mounting Half Inch Mount Weight 6.5
    $509.00
    FREE shipping
  17. Manufacturer SKU: VS421HD4KA Create a powerful visual experience, with the ability to switch between four 4K video sources seamlessly. This 4-port HDMI switch lets you share a monitor, projector or TV with four Ultra High Definition video sources, and switch between them with minimal disruption. Impressive image quality with 4K support The video switch maintains Ultra HD 4K picture quality while switching between content from HDMI source devices - including Blu-ray players and DVD players, computer systems, video game consoles, digital cable and satellite boxes and A/V receivers. 4K support ensures a higher level of image clarity and visibility, delivering four times the resolution of 1080p - 8.29 million pixels versus 2.07 million pixels. It provides a more engaging visual experience for audiences in a wide range of venues including conference centers, boardrooms, educational facilities, and commercial settings. With its exceptional resolution and image quality, it's also ideal for bringing your digital signage to life. Fast and easy operation Enjoy hassle-free operation with three switching modes: Fast auto-switching: ensures minimal time for switching between HDMI sources. The switch provides effortless operation with advanced auto-sensing - it detects the latest connected HDMI source and automatically switches to it. Auto-switching encourages collaboration among colleagues, by making it easy to share a projector or display. It also ensures no downtime in a digital signage application if a source signal is accidentally powered off or fails. Priority switching: identifies one port to take first priority for HDMI sources when multiple sources are connected, ideal for applications such as digital signage. Manual switching: enables you to manually select your HDMI source with front panel buttons that are easy to use. An IR remote control is included in the box, enabling you to select your desired input source remotely. The RS-232 serial control interface ensures easy
    $265.00
    + Shipping
  18. Manufacturer SKU: MSTMDP124DP This MST hub lets you connect four monitors to your Mini DisplayPort (mDP) 1.2 equipped Windows tablet, laptop or desktop. Increase productivity with multiple screens The newest generations of computers are more portable than ever, which often means that youre left with fewer video outputs and smaller integrated screens. This MST hub solves both of these problems by letting you connect four additional displays to your computer, which makes multitasking much easier. Connect to any display With the MST hub, you can use Mini DisplayPort video adapters and cable adapters that enable you to connect HDMI, VGA or DVI displays. This ensures that your MST hub will be compatible with virtually any television, monitor or projector. The hub is VESA and DisplayPort certified to support DP 1.2 enabled systems, for seamless integration with your existing video equipment. Configure your displays for any environment Using the MST hub, you can extend your desktop onto additional monitors and stream independent content to each display, giving you the freedom to multitask and increase your productivity. You can also mirror the same image onto multiple displays for remote viewing applications such as digital signage. Enjoy amazing video quality, without draining system resources MST technology uses your existing video card to minimize the use of system resources while delivering Ultra HD 4K resolutions. This unprecedented performance makes MST perfect for high-resolution applications such as graphic design, gaming and medical imaging. Note: When using a DisplayPort 1.1 video card the MSTMDP123DP will act as a splitter, automatically mirroring your video source across all displays. Resolution limitations apply. The MSTMDP124DP supports plug-and-play installation for a hassle-free setup, and is backed by a StarTech.com 2-year warranty and free lifetime technical support. Notes: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict
    $257.00
    + Shipping
  19. Zoom U-22 - USB Mobile Recording and Performance Interface Only from Rubber Monkey
    $169.00
    + Shipping
  20. MOTU 1248 - Thunderbolt and USB Audio Interface With AVB Networking and DSP (32x34, 4 Mic) Only from Rubber Monkey
    $1,995.00
    + Shipping
Back to top

Recently Viewed Audio & Video Accessories


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.