Boating cobb co leather black - Page 4 | Best Prices in Australia | GetPrice
Showing 61 - 80 of 185 results for

Boating cobb co leather black

Sort:
  1. E1 Single Speed Electric Conversion Kits The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and a RA582000 push button. Electric Conversion Kits - E1 Single Speed Motor RA2062211300: E1, 12 Volt, to suit 62 RA2062211400: E1, 24 Volt, to suit 62
    + Shipping
  2. Fairlead Stainless Lined, Black Product No. Description A (mm) B (mm) C (mm) Weight (g) RF59 ID14mm 14.0 5.0 25.0 17 RF2358 ID16mm 16.0 50.0 25.0 26   FEATURES Stainless steel lined   PRODUCT INFORMATION Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.   MATERIALS Impact resistant, U.V. stablised Nylon Stainless steel liner
    + Shipping
  3. Lightweight Tiller Extension Strong, lightweight anodised aluminium tube UV resistant, extra tough Spinflex joint Spinflex™ joint allows full 360 degree swivel Spinflex™ joint is uniquely moulded at 30 degrees to reduce induced stress that contributes to early failure of a vertical moulded joint Spinflex joint holds tiller in helming position, 30 degrees above horizontal  Triple wave handle gives a choice of secure grip positions Responsive 'feel' and precise helm control Hole centres allow retrofitting from other products and upgrade to Spinlock EA or EJ models Includes retaining clip Specifications: Part number: EJB/600B Length: 600mm (23 5/8") Weight: 125g (4.4oz) Fastener: 2 x M5 (3/16") Pan Head (not supplied) Part number: EJB/900B Length: 900mm (35 7/16") Weight: 170g (6.0oz) Fastener: 2 x M5 (3/16") Pan Head (not supplied) Part number: EJB/1400B Length: 1400mm (55 7/64") Weight: 255g (8.9oz) Fastene...
    + Shipping
  4. E1 Single Speed Electric Conversion Kits The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and a RA582000 push button. Electric Conversion Kits - E1 Single Speed Motor RA2028211300: E1, 12 Volt, to suit 28 RA2028211400: E1, 24 Volt, to suit 28
    + Shipping
  5. E1 Single Speed Electric Conversion Kits The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and a RA582000 push button. Electric Conversion Kits - E1 Single Speed Motor RA2034211300: E1, 12 Volt, to suit 34 RA2034211400: E1, 24 Volt, to suit 34
    + Shipping
  6. Handle replacement for XX0812 (2005+) Part Number: SPXX-HDLB
    + Shipping
  7. SPECIFICATIONS Double zip top flap Large end pockets One end pocket fully enclosed One end pocket with mesh and expandable wet/dry bag compartment Padded carrying handles
    + Shipping
  8. Armstrong deck plates are high-quality, US-made waterproof plates that are fast and simple to install to save you time and money. Ideal for motor wells, cockpits, waste/water tanks, pods Etc. Simply turn the knob on top of the deck plate to tighten the plate against the seal. The retaining bracket locks the deck plate in place. Features Made from polypropylene with UV inhibitors Quick, tool-free, fast & easy installation No trim ring to install, no fasteners or sealant required  High strength & weatherability Textured non-skid surface Suitable for varying deck thickness by reversing the retaining bracket 100% waterproof - watertight EPDM seal
    + Shipping
  9. E1 Single Speed Electric Conversion Kits The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and a RA582000 push button. Electric Conversion Kits - E1 Single Speed Motor RA2040211300: E1, 12 Volt, to suit 40 RA2040211400: E1, 24 Volt, to suit 40
    + Shipping
  10. Designed to accommodate most size spinnaker poles. Weight 75 g Material: U.V. resistant Nylon
    + Shipping
  11. Superb mid load holding performance Unique Reactor Cam technology - linked base and cam react together in one self contained module ‘Reactive Clutching’ - line holding is consistent and fast across the full diameter range - release is smooth and progressive Offers significantly more consistent holding on small diameter, modern performance lines Ultra lightweight alloy/composite construction Handle lift to ergonomic position for release Reactor cam module is easily removed, for on deck cleaning and servicing Single units only Side mount versions available Part Number: XTR0812 Specifications Lines 8-12mm (5/16'-1/2') Loads upto 1000kgs (2200lbs) Side Mounting Side mounting is usually the neatest solution for spars, side decks and coamings Weights XTR Single - 340g (12oz) Fasteners XTR Single - 2 x M8 (5/16") HEX Head (not supplied)
    + Shipping
  12. The XX Range of clutches holds loads 50% higher than any conventional clutch, with smooth and controlled release. The only secure clutch solution for genoa and spinnaker halyards on performance yachts from 35-50 feet. XXA0812 offers users high performance on lines 8-12mm, loads up to 1800kgs. For users looking for enhanced performance on small diameter blended covered lines, load holding up to 2350kgs and excellent resistance to abrasion on powered hoists and control, look at the new XXB0812. Also available in the XX Range is the XXC with ultra high performance and ultra lightweight body. Latest jaw technology offers consistent holding of blended covered ropes Optimised for high performance 8mm - 12mm (5/16" - 1/2”) line diameters Available white coated, black anodised or silver polished alloy to match deck or rig Side mount versions available Lock Open version available Access ports for fresh water flushing Smooth controlled release action One-piece jaw set i...
    + Shipping
  13. The XX Range of clutches holds loads 50% higher than any conventional clutch, with smooth and controlled release.  The only secure clutch solution for genoa and spinnaker halyards on performance yachts from 35-50 feet.  XXA0812 offers users high performance on lines 8-12mm, loads up to 1800kgs.  Latest jaw technology offers consistent holding of blended covered ropes Optimised for high performance 8mm - 12mm (5/16" - 1/2”) line diameters Available white coated, black anodised or silver polished alloy to match deck or rig Side mount versions available Lock Open version available Access ports for fresh water flushing Smooth controlled release action One-piece jaw set is easy to remove and clean Line height optimised for correct lead to winch Can be set up for remote operation with no handle Part Number: XXB0812/HP - Side Mount Port, Black Specifications: Lines: 8mm - 12mm (5/16" - 1/2") Loads up to 2300kg Weight: 1095g (38.6oz) Fast...
    + Shipping
  14. Designed for the hardest conditions, to reduce the strain and increase the sheer enjoyment of helming. The Asymmetric grip improves helming performance in three ways: More feedback - for accurate and precise control More mobility - maintains the best helming position for optimum trim and visibility Less fatigue - correct helming position reduces back pain and improves concentration Asymmetric grip fits the hand and supports the wrist, on or off the wind Allows two handed helming with arms relaxed into a more comfortable, elbows-down position Push-button adjustment with Torlon™ ball locking mechanism Strong stainless steel swivel joint for precise control Removable fast pin for easy stowage Integral shock absorber Part Number: EA/1600B (Matt Black) Specifications: Length Closed: 9500mm Length Extended: 1600mm Weight: 900g (31.7 oz)
    + Shipping
  15. The XCS clutch offers a range of quality finished to match your deck or rig.    Aluminium sides for sustained higher load operation Choose XCS when the mounting location requires extra durability, such as mast mounting, when matching surface finishes for aesthetics Mid to higher load rope holding Reliable all around performance Available in white coated, black anodised or silver polished alloy XCS0610 for best performance on smaller diameter lines XCS0814 for best performance across the rope range Ceramic Coated CAM and Base available for consistent holding & performance on modern lines Extruded alloy handle with soft end grip Secure handle locking in open and closed position Easy access to fasteners Handle labels supplied Part Numbers: SPXCS0610/3B - Black Specifications: Lines: 6mm - 10mm (1/4" - 3/8") Loads up to 1000kg (2200lbs) Weight: 1610g (56.4oz) Fasteners: 6 x M8 (5/16") CSK Head (not supplied) XCS0610 - S...
    + Shipping
  16. Black finish. 45mm x 6mm with 1/2" Nylon bush.No. of leavesRating capacity per pairPart#51000kgSS513
    FREE shipping
  17. Black finish. 45mm x 6mm with 1/2" Nylon bush.No. of leavesRating capacity per pairPart#71350kgSS713
    FREE shipping
Back to top

Recently Viewed Boating


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.