Boating glenn perri class one | Best Prices in Australia | GetPrice
Showing 1 - 20 of 24 results for

Boating glenn perri class one

Sort:
  1. Big power for small spaces Just because space is tight, doesn't mean that you have to comprimise on power and performance. Clarion's range of Micro Amplifiers deliver big power while only taking up around half the space of a standard-style amplifier. The XC2110 is a powerful 400W monoblock Class-D featuring MOS-FET power supply, bass boost and variable gain for the ultimate control over output. Circuit Design Achieves High Quality SoundClarion amplifiers feature uncompromising resistance to magnetic noise, thereby minimizing distortion, as well as high quality terminals to offer low electrical and contact resistance. Easy subwoofer system configuration is possible with the embedded high pass and low pass filters. The result is high quality sound you can enjoy in a variety of systems.Corrosion Resistant RCA and Connectors on All XC series AmplifiersBy utilizing corrosion resistant RCA and Connectors, XC series amplifiers offer improved durability and reliability in harsh environments. The XC series amplifiers are true marine amplifiers with efficient aluminum heatsinks and locking power terminals for the harsh marine conditions.High-Density Amp with Four-Layer Circuit BoardA four-layer circuit board topology reduces noise interference while filtering signals to produce high-quality sound.2-Ohm StabilityUtilizing this design for peak performance and unwavering reliability, Clarion’s amplifiers can drive lower impedance loads for increased power. Product Highlights 400 Watts Maximum Power 1 x 300 Watts Continuous Power @ 2 Ohm 1 x 200 Watts Continuous Power @ 4 Ohm 12dB/Oct. Low Pass Electronic Crossover, 35Hz-250Hz 2 Ohm stability Ground Loop Isolation Input Circuit Corrosion resistant nickel plated RCA, speaker and power connectors RCA & High Level speaker inputs
    + Shipping: $9.00
    (32% Off)
  2. The M750-1D is a 750 Watt mono high efficiency Class-D marine amp featuring a Marine grade PC Board, on-board Punch EQ, infrasonic filter, variable crossover and tri-state protection circuits. 12dB/octave Butterworth crossover 4 Gauge power/ground connectors Cast aluminum heatsink Top mounted controls Marine grade 2-part epoxy coated PCB On-board Punch EQ with +18dB boost @ 45Hz. Tri-stage protection covers thermal, over-current and short circuits. Infrasonic filter Remote PLC (Punch Level Control) 1 Year Standard Warranty CEA-2006 Compliant: CEA-2006 Power Rating250W x 1 @ 4Ω≤1.0% THD+N Number of Channels: 1 Rated Power (RMS Continuous Power): 250 Watts x 1 @ 4-Ohm 500 Watts x 1 @ 2-Ohm 750 Watts x 1 @ 1-Ohm Total Power (Sum of Rated Power): 750 Watts RMS Dynamic Power (PVC/PowerCube®): 308 Watts x 1 @ 4-Ohm 565 Watts x 1 @ 2-Ohm 769 Watts x 1 @ 1-Ohm Bridgeable: No Frequency Response: 20Hz to 250Hz +/-1dB Efficiency (average): 85% @ 4-Ohm 85% @ 2-Ohm 80% @ 1-Ohm Crossover Controls: Variable 50Hz - 250Hz @ 12dB/octave Tone Controls: 0dB to +18dB @ 45Hz Signal Input: Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast Aluminum Cooling: Convection Remote Controls: n/a Visual Indicators: Power Protect Circuit Topology Class: Class-D Shipping Weight: 6.6 Lbs. (2.99 Kg.) Dimensions (H x W x D): 1.97" x 6.77" x 9.10" (5cm x 17.20cm x 23.10cm) Dimensional Diagram:
    + Shipping: $9.00
  3. Features: Forged 316 stainless steel snail snap. Easy to install; one-hand operation. Efficient to use: no jamming of the system Ideal for hoisting a storm jib or a staysail Part # Weight Working Load Breaking Strength Length Max Area Jaw Max Area Bail/Eye kg lbs kg lbs kg in mm in mm in mm 2483 0.037 529 240 882 400 2.17 55 0.35 9 0.31 8 2486 0.220 353 160 661 300 1.97 50 0.30 7.5 0.26 6.5 2487 0.059 882 400 1213 550 2.56 65 0.43 11 0.39 10 2488 0.143 1764 800 2315 1050 3.54 90 0.67 17 0.51 13 2489 0.100 1235 560 1764 800 3.15 80 0.51 13 0.45 11.5 2490  0.244 2116 960 2866 1300 4.33 110 0.94 24 0.59 15
    + Shipping
  4. Features: Brass snail snaps. Easy to install; one-hand operation. Efficient to use: no jamming of the system Ideal for hoisting a storm jib or a staysail.                         Part # Weight Working Load Breaking Strength Length Max Area Jaw Max Area Eye/Bail kg lbs kg lbs kg in mm in mm in mm 72483 0.036 266 120 397 180 2.16 55 0.35 9 0.31 8 72486 0.030 176 80 220 100 1.97 50 0.30 7.5 0.26 6.5 72487 0.056 441 200 551 250 2.56 65 0.43 11 0.39 10
    + Shipping
  5. The M600-4D is a 600 Watt 4-channel high efficiency Class-D marine amplifier featuring a Marine grade PC Board, on-board Punch EQ, variable crossover and tri-state protection circuits. 12dB/octave Butterworth crossover 2/4 channel input switch 4 Gauge power/ground connectors Cast aluminum heatsink Top mounted controls Marine grade 2-part epoxy coated PCB On-board Punch EQ with +18dB boost @ 45Hz. Tri-stage protection covers thermal, over-current and short circuits. 1 Year Standard Warranty CEA-2006 Compliant: CEA-2006 Power Rating100W x 4 @ 4Ω≤1.0% THD+N Number of Channels: 4 Rated Power (RMS Continuous Power): 100 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged Total Power (Sum of Rated Power): 600 Watts RMS Dynamic Power (PVC/PowerCube®): 129 Watts x 4 @ 4-Ohm 220 Watts x 4 @ 2-Ohm 420 Watts x 2 @ 4-Ohm Bridged Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/-1dB Efficiency (average): 80% @ 4-Ohm 75% @ 2-Ohm Crossover Controls: Front Channels: Variable 50Hz - 500Hz @ 12dB/octave Rear Channels: Variable 50Hz - 500Hz @ 12dB/octave Tone Controls: 0dB to +18dB @ 45Hz Signal Input: Low Level: 2 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast Aluminum Cooling: Convection Remote Controls: n/a Visual Indicators: Power Protect Circuit Topology Class: Full Range Class-D Shipping Weight: 7.038 Lbs. (3.19 Kg.) Dimensions (H x W x D): 1.97" x 6.77" x 11.06" (5cm x 17.20cm x 28.10cm) Dimensional Diagram:
    + Shipping: $9.00
  6. The M1200-1D is a 1200 Watt mono high efficiency Class-D marine amp featuring a Marine grade PC Board, on-board Punch EQ, infrasonic filter, variable crossover and tri-state protection circuits. 12dB/octave Butterworth crossover 4 Gauge power/ground connectors Cast aluminum heatsink Top mounted controls Marine grade 2-part epoxy coated PCB On-board Punch EQ with +18dB boost @ 45Hz. Tri-stage protection covers thermal, over-current and short circuits. Infrasonic filter Remote PLC (Punch Level Control) 1 Year Standard Warranty CEA-2006 Compliant: CEA-2006 Power Rating400W x 1 @ 4Ω≤1.0% THD+N Number of Channels: 1 Rated Power (RMS Continuous Power): 400 Watts x 1 @ 4-Ohm 800 Watts x 1 @ 2-Ohm 1200 Watts x 2 @ 1-Ohm Total Power (Sum of Rated Power): 1200 Watts RMS Dynamic Power (PVC/PowerCube®): 485 Watts x 1 @ 4-Ohm 854 Watts x 1 @ 2-Ohm 1256 Watts x 2 @ 1-Ohm Bridgeable: No Frequency Response: 20Hz to 250Hz +/-1dB Efficiency (average): 85% @ 4-Ohm 85% @ 2-Ohm 80% @ 1-Ohm Crossover Controls: Variable 50Hz - 250Hz @ 12dB/octave Tone Controls: 0dB to +18dB @ 45Hz Signal Input: Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast Aluminum Cooling: Convection Remote Controls: n/a Visual Indicators: Power Protect Circuit Topology Class: Class-D Shipping Weight: 7.825 Lbs. (7.82 Kg.) Dimensions (H x W x D): 1.97" x 6.77" x 11.06" (5cm x 17.20cm x 28.10cm) Dimensional Diagram:
    + Shipping: $9.00
  7. The M600-5 is a 600 watt marine grade “all-in-one” amplifier featuring four full-range stereo channels and a dedicated mono subwoofer channel. Class A/B technology (4 channel) Class-D technology (sub channel) Remote Punch Level Control (sub channel) included RCA and high level input with 2/4/5 channel select 12 dB/Oct Butterworth crossovers On board Punch EQ control Separate Front, Rear and Sub gain control Real time output and power supply thermal sensing Cast aluminum heat sink 4 AWG power/ground connectors MOSFET power supply Over current and short circuit protection Marine grade two part epoxy coating on circuit boards Muted turn on 1 Year Standard Warranty CEA-2006 Compliant: CEA-2006 Power Rating50Wx4 + 200Wx1 @ 4Ω≤1.0% THD+N Number of Channels: 5 Rated Power (RMS Continuous Power): 50W x 4 + 200W x 1 @ 4-Ohm 75W x 4 + 300W x 1 @ 2-Ohm 150W x 2 @ 4-Ohm Bridged Total Power (Sum of Rated Power): 600 Watts RMS Dynamic Power (PVC/PowerCube®): 57W x 4 + 221W x 1 @ 4-Ohm 90W x 4 + 390W x 1 @ 2-Ohm 178W x 2 @ 4-Ohm Bridged Bridgeable: Yes (front/rear channels) Frequency Response: 20Hz to 20kHz +/-1dB Efficiency (average): Channels 1/2/3/4: 64% @ 4-Ohm Sub Channel: 85% @ 4-Ohm Crossover Controls: Front Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave Rear Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave Sub Channel: LP Variable 50Hz - 250Hz @ 12dB/octave Tone Controls: Front: 0/6/12dB @ 45Hz Rear: 0/6/12dB @ 45Hz Sub: Variable 0dB to 12dB @ 45Hz Signal Input: Low Level: 3 RCA Pair Signal Output: - Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast Aluminum Cooling: Convection Remote Controls: Punch Level Control: When connected is linked to "gain control" to provide remote output level Visual Indicators: Power Protect Circuit Topology Class: Front: Class-A/B Sub: Class-D Shipping Weight: 9.1 Lbs. (4.12 Kg.) Dimensions (H x W x D): 1.98" x 6.77" x 13.99" (5cm x 17.2cm x 33.5cm) Dime
    + Shipping: $9.00
  8. The M400-4D is a 400 Watt 4-channel high efficiency Class-D marine amplifier featuring a Marine grade PC Board, on-board Punch EQ, variable crossover and tri-state protection circuits. 12dB/octave Butterworth crossover 2/4 channel input switch 4 Gauge power/ground connectors Cast aluminum heatsink Top mounted controls Marine grade 2-part epoxy coated PCB On-board Punch EQ with +18dB boost @ 45Hz. Tri-stage protection covers thermal, over-current and short circuits. 1 Year Standard Warranty CEA-2006 Compliant: CEA-2006 Power Rating75W x 4 @ 4Ω≤1.0% THD+N Number of Channels: 4 Rated Power (RMS Continuous Power): 75 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged Total Power (Sum of Rated Power): 400 Watts RMS Dynamic Power (PVC/PowerCube®): 79 Watts x 4 @ 4-Ohm 138 Watts x 4 @ 2-Ohm 255 Watts x 2 @ 4-Ohm Bridged Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/-1dB Efficiency (average): 80% @ 4-Ohm 75% @ 2-Ohm Crossover Controls: Front Channels: Variable 50Hz - 500Hz @ 12dB/octave Rear Channels: Variable 50Hz - 500Hz @ 12dB/octave Tone Controls: 0dB to +18dB @ 45Hz Signal Input: Low Level: 2 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast Aluminum Cooling: Convection Remote Controls: n/a Visual Indicators: Power Protect Circuit Topology Class: Full Range Class-D Shipping Weight: 5.863 Lbs. (2.65 Kg.) Dimensions (H x W x D): 1.97" x 6.77" x 9.10" (5cm x 17.20cm x 23.10cm) Dimensional Diagram:
    + Shipping: $9.00
  9. Harken McLube OneDrop Ball Bearing Conditioner is designed to be used on traveler cars and other ball bearing applications to improve performance by reducing rolling friction. OneDrop Ball Bearing Conditioner is the only product that Harken recommends for use on ball bearing travelers and battcars. • Allows ball bearings to roll freely and evenly. • Eliminates skidding and sliding of the balls. • Conditions and lubricates the surface of the balls. • Maintains a clean, smooth ball bearing surface, free from dirt, sand, salt, and grime. • Packaged in a unique pinpoint dispenser for clean and easy application. Part Number: 7875 Need help to design your Harken system - take a look here for the Harken System Guides and Drawings Or perhaps you need some other information (load calculators, block selectors, service instructions or manuals)?   Take a look here for all the official Harken Support Information
    + Shipping
  10. Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Whether racing or cruising, these smooth- rolling systems pay huge dividends in sail control and are safer and faster than playing the sheet. CB wire retaining clips and composite corner keepers keep ball bearings captive when car is off the track. Specifications Length (mm)381 mm Length (in)15 in Width (mm)85 mm Width (in)3 11/32 in Height (mm)89 mm Height (in)3 1/2 in Weight (g)2275 g Weight (oz)80.25 oz Mainsheet block pin Ø (mm)8  Mainsheet block pin Ø (in)5/16 in Control block pin Ø (mm)6 mm Control block pin Ø (in)1/4 in Maximum working load (kg)4082 kg Maximum working load (lb)9000 lb Breaking load (kg)8163 kg Breaking load (lb)18000 lb Use with trackR32, R32HB Resources/References:Harken Instructions Need help to design you...
    + Shipping
Back to top

Recently Viewed Boating


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.