Bosch Water systems | Best Prices in Australia | GetPrice
Showing 1 - 20 of 52 results for

Bosch Water systems

Sort:
  1. 6 Star High Efficiency Hot Water for Commercial or Domestic Uses where large volumes are needed. Suits 3+ bathroom homes. Features and BenefitsCondensing Technology delivers a 94% energy efficiency with 6 Stars (see diagram in Images)32 litres of hot water per minute with a 25° RiseNatural or LP Gas55+ °C Standard (50° Limited available)Internal installation with Flueing or External Installation with Vent CapCan be used with up to 3 optional temperature controllersCompatible with Solar Hot Water and Warm Water Return systems10 year warranty on heat exchanger (part only)3 year warranty on full parts and labour
    + Shipping
  2. 3+ bathrooms? The Bosch 32 gives you flexibility and reliability when there is a demand for large volumes of hot water. Features and Benefits32 litres of hot water per minuteNatural or LP GasInternal or external installation4.8 Star Energy RatingMain Remote Controller with circulation timing mode included as standard.Two optional sub-controllers can also be used (see below)10 year warranty on heat exchanger (part only)3 year warranty on full parts and labour
    + Shipping
  3. Bosch C26 Condensing models capture heat from the exhaust gas in a second heat exchanger and use it to preheat the incoming cold water (see images). This makes it one of the more energy efficient gas hot water systems on the market.Features and Benefits6.7 star efficiency*12% more efficient than the non-condensing eqivalent26 L/min @ 25°C rise in temperatureContinuous flow comfort and performance - never run out of hot waterSuits 2-3 bathroom homesInstall up to 4 optional temperature controllersPremium main controller (must install first)Then your choice of bathroom controllers or sub controllerCompact, lightweight designGreat payback period against standard continuous flow productThe C26 is available in Natural or LP Gas50°C locked models availableWarranty3 years - Parts and Labour10 years - Heat Exchanger (part only)*Equivalent to 6.7 on the 6 star energy rating scale
    + Shipping
  4. The Bosch External HydroPower 16H system ignites when you turn on the tap. There is no pilot light wasting gas and no electricity is needed for electronic ignition. The system delivers 16 litres of hot water with a 25° rise in temperature.Water flows through a small turbine creating the energy needed to ignite the burner and then turns it off when you turn off the tap.Saves on gas, saves on electricity and makes installation a breeze.Features and BenefitsContinuous flow hot waterFlow rate: 16 litres/min for a 1-2 bathroom home in warmer climates5 Star EfficiencyExternal Installation OnlyAvailable in Natural Gas or LPG modelsWarranties2 Years Parts and Labour10 Years Heat Exchanger (part only)
    + Shipping
  5. Bosch C21 condensing models capture heat from the exhaust gas in a second heat exchanger and use it to preheat the incoming cold water (see images). This makes it one of the most energy efficient gas hot water systems on the market.Features and BenefitsThe C21 offers 6.9 star efficiency*12% more efficient than the non-condensing eqivalent21 L/min @ 25°C rise in temperatureContinuous flow comfort and performance - never run out of hot waterSuits 1-2 bathroom homesInstall up to 4 optional temperature controllersPremium main controller (must install first)Then your choice of bathroom controllers or sub controllerCompact, lightweight designGreat payback period against standard continuous flow productAvailable in Natural or LP Gas50°C locked models availableWarranty3 years - Parts and Labour10 years - Heat Exchanger (part only)*Equivalent to 6.9 on the 6 star energy rating scale
    + Shipping
  6. Bosch Compact Ci units (Ci10, Ci13 and Ci16) are an ideal replacement for existing internal hot water systems. The Ci13 has a flow rate of 10 litres per minute suitable for a one bathroom homeFeatures and Benefits5.2 Star efficiency delivers 10 L/min at a 25°C rise suitable for a 1 bathroom homeAvailable in Natural or LP Gas modelsAutomatic ignition - (no electricity required) Small, compact and attractive design for Internal installation - (perfect for small homes or units) Ideal for frost-prone areasImproved safety features to provide reassurance for your familyFlexible water connections for easy installation in retrofit situationsDigital temperature and fault code displayEasy temperature adjustment for varying inlet temperaturesUnit and all components fully recyclableComprehensive warranties2 Years - Parts and Labour10 Years - Heat Exchanger (part only)NB: Flueing is required. It is readily available from plumbing supply storesImproved safety features allow vertical flueing only.The Ci10 requires 100mm flueing
    + Shipping
  7. Designed for Building Projects, combining high 5.5 star efficiency with easy installation, the Bosch Professional Plus is perfect for new buildings or renovations.Features and Benefits50°C temperature limited model - no need for additional tempering valves5.5+ star energy efficiency ratingDelivers 26 L/min at a 25°C temperature riseEasy installationCompact designInstall up to 4 optional temperature controllersNatural GasComprehensive warranties for domestic installations available3 Years - Parts and Labour10 Years - Heat Exchanger (part only)AGA Certification to AS 4552: 7032
    + Shipping
  8. Bosch Compact Ci units (Ci10, Ci13 and Ci16) are an ideal replacement for existing internally installed hot water systems. The Ci16 produces a flow rate of 16 litres per minute suiting a 1 or 2 bathroom home.Features and BenefitsThe 4.6 Star Ci16 delivers 16 L/min at a 25°C rise suitable for a 1-2 bathroom homeAvailable in Natural or LP Gas modelsAutomatic ignition - (no electricity required) Small, compact and attractive design for Internal installation - (perfect for small homes or units) Ideal for frost-prone areasImproved safety features to provide reassurance for your family Flexible water connections for easy installation in retrofit situations Digital temperature and fault code display Easy temperature adjustment for varying inlet temperatures Unit and all components fully recyclable Comprehensive warranties 2 Years - Parts and Labour 10 Years - Heat Exchanger (part only)NB: Flueing is required. It is readily available from plumbing supply storesImproved safety features allow vertical flueing only.The Ci16 require 125mm flueing
    + Shipping
  9. Can be used as the third or fourth controller to the Premium Controller range. Suitable for use with any Bosch Electronic Highflow or the Bosch 26eco+.Features and BenefitsAccurate temperature settingAssistance Call button allows user to signal other household members via an audible alarmSub Controller has maximum temperature of 50°C for your family's safety
    + Shipping
  10. On top of all of the benefits of a Standard Controller, Premium Controllers automatically stop water flow at a predefined volume, plus have time display for convenience. They are suitable for use with the Bosch Electronic Highflow range and the Bosch Condensing C21 or C26.Features and BenefitsEasy to useNo need to mix hot and cold waterSimply select desired temperature and turn on hot water tapMain controller can be set to maximum temperature of the hot water systemBathroom controller has maximum temperature of 50°C for extra safetyConsistent delivery - eliminates hot and cold fluctuations caused when another tap is used or toilet flushedVolume setting - user can specify the output of water in litresWater Saver / Bath Fill function - stops water flow at a predefined levelConvenient time display3 Years - Parts and Labour warranty
    + Shipping
  11. OptiFlow Professional is the standard for trade projects. Bluetooth is not available.Features and BenefitsOptiFlow combustion management sytesm6 star efficiencyCompact, lightweight water heaterSolar compatible applianceElectronically controlled modulationUp to 4 optional controllers50°C compliant models available3 year parts and labour warranty12 year heat exchanger warrantyMain controller (Part no: 7736502925)Bathroom Controller (Part no: 7736503406)OptiFlow controllers are each supplied with a 20m cable. Any combination of bathroom and main controllers can be used, however at least one main controller must be used if a set temperature above 50°C is required.
    + Shipping
  12. OptiFlow Professional is the standard for trade projects. Bluetooth is not available.Features and BenefitsOptiFlow combustion management sytesm6 star efficiencyCompact, lightweight water heaterSolar compatible applianceElectronically controlled modulationUp to 4 optional controllers50°C compliant models available3 year parts and labour warranty12 year heat exchanger warrantyMain controller (Part no: 7736502925)Bathroom Controller (Part no: 7736503406)OptiFlow controllers are each supplied with a 20m cable. Any combination of bathroom and main controllers can be used, however at least one main controller must be used if a set temperature above 50°C is required.
    + Shipping
  13. Install up to 4 optional controllers with the Bosch Optiflow models and enjoy perfect temperature control of water in your kitchen, bathroom, ensuite and laundry.OptiFlow controllers are each supplied with a 20m cable. Any combination of bathroom and main controllers can be used, however at least one main controller must be used if a set temperature above 50°C is required.
    + Shipping
  14. Install up to 4 optional controllers with the Bosch Optiflow models and enjoy perfect temperature control of water in your kitchen, bathroom, ensuite and laundry.OptiFlow controllers are each supplied with a 20m cable. Any combination of bathroom and main controllers can be used, however at least one main controller must be used if a set temperature above 50°C is required.
    + Shipping
  15. The Bosch OptiFlow Professional (4000S) External is an electronically controlled continuous flow water heater, designed for an easy upgrade from Bosch Pilot & HydroPower models*.Features and Benefits6 star efficiencyElectronically Controlled ModulationDelivers 12 L/min at a 25°C temperature riseCompact DesignSuitable for 1 bathroomDesigned for an easy change-over between both the Bosch HydroPower & Pilot models*12L, low gas load modelExternal installation only50°C locked options availableAvailable in Natural or LP GasWarranty3 Years - Parts and Labour12 Years - Heat Exchanger (part only)*Requires External 240V power point
    + Shipping
  16. The room sealed 6 star, Bosch OptiFlow Professional Internal (4000s) brings a European design compact internal hot water service to Australian homes. The co-axial flue uses outside air for efficient combustion and supports highly flexible installation options.Features and BenefitsRoom sealed applianceInbuilt temperature controllerElectronically controlled modulation50°C locked models available6 Star efficiencyCompact DesignDelivers 16 L/min at a 25˚C temperature riseSuitable for 1-2 bathroomAvailable in Natural or LP GasWarranty3 years - Parts and Labour12 years - Heat Exchanger (part only)Requires Bosch Co-Axial Flueing (see options below and to the right)
    + Shipping
  17. The Bosch External HydroPower 10H system ignites when you turn on the tap to deliver 10 Litres per minute of hot water. There is no pilot light wasting gas and no electricity is needed for electronic ignition.Water flows through a small turbine creating the energy needed to ignite the burner and then turns it off when you turn off the tap.Saves on gas, saves on electricity and makes installation a breeze.Features and BenefitsContinuous flow hot waterFlowrate: 10 litres/min for a 1 bathroom home5 Star EfficiencyExternal Installation OnlyAvailable in Natural Gas or LPG modelsWarranties2 Years Parts and Labour10 Years Heat Exchanger (part only)
    + Shipping
  18. Install up to 4 optional controllers with any Bosch Highflow model or Condensing C21 or C26* and enjoy perfect temperature control of water in your kitchen, bathroom, ensuite and laundry.On top of all of the benefits of a Standard Controller, Premium Controllers automatically stop water flow at a predefined volume, plus have time display for convenience.Features and BenefitsEasy to useNo need to mix hot and cold waterSimply select desired temperature and turn on hot water tapMain controller can be set to maximum temperature of the hot water systemConsistent delivery - eliminates hot and cold fluctuations caused when another tap is used or toilet flushedVolume setting - user can specify the output of water in litresWater Saver / Bath Fill function - stops water flow at a predefined levelConvenient time display3 Years - Parts and Labour warranty
    + Shipping
  19. This units comes with the Bosch 32Q System.Install this Main and up to 2 additional sub-controllers with any Bosch 32, 32Q or 32C and enjoy perfect temperature control of water in your kitchen, bathrooms and laundry.Features and BenefitsEasy to useNo need to mix hot and cold waterSimply select desired temperature and turn on hot water tapAccurate Temperature settingsConsistent delivery - eliminates hot and cold fluctuations caused when another tap is used or toilet flushedBurner On - shows when heater in useDiagnostic informationConvenient time display3 Years - Parts and Labour warranty (domestic) 2 years (commercial)32Q specific functionsCircualation On modePump Timer settings
    + Shipping
  20. It's now possible to connect your hot water appliance with your Android and iOS devices. Bosch has introduced Australia's first hot water appliance with Bluetooth connectivity, simply download the ProWater app from the Playstore or Appstore.Features and BenefitsBluetooth connectivity up to 10m rangeOptiFlow combustion management sytesmCompatible with Water & ProWater Apps6 star efficiencyCompact, lightweightSolar compatible water heaterElectronically controlled modulationUp to 3 controllers can be installed in addition to the Bluetooth controller50°C compliant models available3 year parts and labour warranty12 year heat exchanger warrantyUser app available for Android and iOS
    + Shipping
Back to top

Recently Viewed Water systems


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.