billabong crossfire x mini - Compare Cheap billabong crossfire x mini Prices & Save on shopping in Australia
You searched

billabong crossfire x mini

Showing 1 - 5 of 5 results
Sort:
  1. Billabong Crossfire X Mini Plaid Mens Boardwalkshort Grey

    Features Men#x27;s Boardwalk short Colour: Light Grey Material: Cotton blend 4-way stretch yarn-dye check Outseam: 21' core fit Fitted waist with belt loops Hip and back pockets Chino styling Quick drying

    $79.99
    FREE shipping
    Go to shop
  2. Billabong Crossfire X Mini Plaid Mens Boardwalkshort Grey

    Features Men#x27;s Boardwalk short Colour: Light Grey Material: Cotton blend 4-way stretch yarn-dye check Outseam: 21' core fit Fitted waist with belt loops Hip and back pockets Chino styling Quick drying

    $79.99
    FREE shipping
    Go to shop
  3. Billabong Crossfire X Mini Plaid Mens Boardwalkshort Grey

    Features Men#x27;s Boardwalk short Colour: Light Grey Material: Cotton blend 4-way stretch yarn-dye check Outseam: 21' core fit Fitted waist with belt loops Hip and back pockets Chino styling Quick drying

    $79.99
    FREE shipping
    Go to shop
  4. Billabong Crossfire X Mini Plaid Mens Boardwalkshort Grey

    Features Men#x27;s Boardwalk short Colour: Light Grey Material: Cotton blend 4-way stretch yarn-dye check Outseam: 21' core fit Fitted waist with belt loops Hip and back pockets Chino styling Quick drying

    $79.99
    FREE shipping
    Go to shop
  5. Billabong Crossfire X Mini Plaid Mens Boardwalkshort Grey

    Features Men#x27;s Boardwalk short Colour: Light Grey Material: Cotton blend 4-way stretch yarn-dye check Outseam: 21' core fit Fitted waist with belt loops Hip and back pockets Chino styling Quick drying

    $79.99
    FREE shipping
    Go to shop
  6. More results from our partners

    Sidi Crossfire 3 Motocross Boots Blue/White/Red 50

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Billabong Men's Essential Core Fit - Black Heather

    Billabong Men's Essential Core Fit - Black Heather Only $29.99 from Catch

    $29.99
    + Shipping: $9.99
    Go to shop

    Daiwa Crossfire Surf Rods

    Daiwa Crossfire Surf RodsAlthough it has become more and more common to see surfside anglers casting into the wash with much shorter rods, there is still no substitute for length when fishing the beach and rocks. However, the cost of high end surf rods of significant length can be a little daunting for the newbie, budget conscious and casual angler. This is where the Daiwa Crossfire Surf Rods come into their own. For around the $100 mark and less you can get equipped with a quality Daiwa Crossfire Surf Rod up to 360cm in Length and hit the beaches and rocks, even in a heavy messy swell, knowing you are well armed to deal with all comers.The 3 models listed here give the angler the ability to hone their selection based on application. Indeed, the each rod is refined to being technique specific. The main decision will be; how light or heavy you wish to fish. Of course, you will enjoy features that are usually reserved for more expensive rods such has tough EVA grips and carbon blanks.The 862 Crossfire Rod makes an ideal light surf rod for those sheltered beaches where there isn’t too much wash to get through. Pair up with a 3000-4000 sized spinning reel (not included) for some light surf fun.The 1062 will be ideal for those anglers looking for the option of float fishing for Gar from the jetties and sea wall or hitting the light surf for Whiting and Dart. With a 3000 to 4000 size reel (reel not included) you will have the perfect set up for the casual angler or novice.The 1202L is also great for float fishing around the rocks and will provide awesome fun for small pelagic fish, Tailor and Salmon. It is great for hunting the bays and estuaries for Bream, Whiting and Flathead, the sensitive tip allows the angler to feel every inquiry. Match it up with a 4000-4500 size reel for a balanced rig (reel not included). Great general purpose light tackle fishing.The 1202H provides access to the heavy action. Match it up with a 6500 sized spin reel (reel not included) spooled with 15kg line and hunt the rocks for Snapper, Salmon, Kingfish, Tailor and Drummer as a couple of prime examples. You will have all the brute force you require to wrestle these hard-core players and come out on top.At this price, fishing the rocks and beaches with quality kit has never been more affordable. Select your Daiwa Crossfire Surf Rod now and add it to your shopping basket.Features and SpecificationsGraphite blanks – Ideal for sensitivityAluminium Oxide rod guidesQuality and Tough EVA Rod gripsSuitable For beach and rock fishingFast Taper ActionsSuitable for Spinning type Reels2 Piece Rod BlankNote: Images for illustration only. Price is for 1 rod only. Prices vary slightly depending on which model you choose.Model Specific InfoModel Crossfire 8628ft 6 inchesRecommended line class 3-5kgMedium ActionCasting weight recommendation 7-28 gramsRecommended size Spinning Reel: 3000 - 4000Model Crossfire 106210ft 6 inchesRecommended line class 3-5kgMedium ActionCasting weight recommendation 7-35 gramsRecommended size Spinning Reel: 3000 - 4000Model Crossfire 1202L12 feetRecommended line class 3-6kgLight ActionCasting weight recommendation 10-40 gramsRecommended size Spinning Reel: 4000-4500Model Crossfire 1202H12 feetRecommended line class 7-15kgHeavy ActionCasting weight recommenda

    $79.00
    + Shipping: $10.00
    Go to shop

    Crossfire 12'0'' 2 Piece Light Medium Fast Surf Rod

    The Crossfire Surf series is built on a lightweight graphite blank, these are incredibly strong blanks with a soft tip for easy casting and excellent bite detection. they are complimented by AO guides, Graphite reel seats and ultra tough EVA grips.

    $89.00
    + Shipping: $15.00
    Go to shop

    Sidi Crossfire 3 Motocross Boots Blue/White/Red 47

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Billabong Men's Essential Core Fit - Black

    Billabong Men's Essential Core Fit - Black Only $29.99 from Catch

    $29.99
    + Shipping: $9.99
    Go to shop

    Sidi Crossfire 3 Motocross Boots Black/Red 45

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Sidi Crossfire 3 Motocross Boots White/Orange 43

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Sidi Crossfire 3 Motocross Boots Black/Red 40

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Sidi Crossfire 3 Motocross Boots Black 40

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Billabong Men's Essential Core Fit - Indigo Marle

    Billabong Men's Essential Core Fit - Indigo Marle Only $29.99 from Catch

    $29.99
    + Shipping: $9.99
    Go to shop

    Sidi Crossfire 3 Motocross Boots White 43

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Crossfire Surf Rod Series

    The Crossfire Surf series is built on a lightweight graphite blank, these are incredibly strong blanks with a soft tip for easy casting and excellent bite detection. they are complimented by AO guides, Graphite reel seats and ultra tough EVA grips.

    $69.00
    + Shipping: $15.00
    Go to shop

    Sidi Crossfire 3 Motocross Boots Blue/White/Red 40

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop

    Sidi Crossfire 3 Motocross Boots White 47

    SIDI PRESENTS CROSSFIRE 3, THE 3rd GENERATION OF THE N.1 OFFROAD BOOTThe Crossfire line has evolved for the third time!The brand new Crossfire 3 is manufactured in “TECHNOMICRO” and it is equipped with PU protections.Both the tongue of the inner last with internal gusset and the back joints are padded with closed-cell material, to avoid water and sweat absorption.The tip of the boot is entirely covered by plastic protection panels enriched by a geometric embossed design for more grip. The boot is equipped with a metatarsus protection. A rigid nylon insert has been added to protect the inner part of the boot in case the rider’s foot slides off the foot peg or the kick-starter. The insert is replaceable by unscrewing the 4 screws.The plastics of Crossfire 3, heel included, have all a new design. The anatomically shaped heel is manufactured in PU. Its particular shape has been studied and improved to provide foot’s safety in case of twisting. The new heel assures comfort and stability.CROSSFIRE 3 jointsThe Crossfire 3 is, as in the previous version, equipped with 2 joints: the first lower joint on the ankle, called “hyper extension block”, has a brand new technology. It prevents hyper extension of the ankle, of the instep and of the back tendon during front and back leg flexure. Such technology gives more safety to the rider.The second joint, placed on the boot leg, improves boot’s flexibility and the boot leg adjustment. In this way the rider can manage independently the calf’s closure subject to his needs, achieving a comfortable fit.On the back of the boot, between the two joints and the two wired air inlets, there is a graphical design made with PU insert.The boot leg has a replaceable inner calf plate, produced in PU and a printed rubber insert, to protect the leg from exhaust heat, wear and tear. The calf plate features an inner double adjustment, which allows to widen the circumference of the boot and accommodate even wider calves and shin guards.This regulation has been increased for better performance. The front shin plate is anatomically shaped and replaceable. Crossfire 3 uses a 4 micro adjustable buckle closure, each with locking teeth and micrometric memory-regulation straps. Buckles, straps and retaining clips are easily replaceable. Buckles have just one fixing point (by a screw) and this allows an easy closure and the buckles to adapt to the rider’s position.The main feature of the boot is that all four buckles work independently from each other. A spoiler has been added to deflect stones and other dirt from the first buckle, and to protect the buckle itself.The central strap system (in case of wear) can be quickly replaced thanks to 2 screws that fix it to the boot, and it is available in 2 sizes (40-43) (44-50).Crossfire 3 is internally lined in Cambrelle (foot’s tip), while the ankle area up to middle calf is lined with a Teflon-treated air mesh. The Teflon treatment prevents the complete absorption of water and sweat. Effectively, not holding water on the inside, the boot will dry quickly and the treatment also prevents the onset of mould.Cambrelle is a lining that, due to its particular polyamide structure, is highly resistant to abrasion and provides a good humidity absorption, guaranteeing a rapid drying rate.The upper part of the inner leg is lined with soft mesh and features a special padding on the shin.The malleolus area is protected by an ergonomic closed cell foam memory padding.The upper ends with an elastic gaiter equipped with an anti-heat suede protection-grip panel, by the calf plate. The gaiter closes with a Velcro strap, with soft PU insert, to prevent the entrance of stones and dust into the boot.The boot leg is fully assembled with screws, stitch-free and entirely replaceable!- Sidi Crossfire 3

    $603.73
    + Shipping: $31.08
    Go to shop
Back to top

Recently Viewed Men's Pants


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.