boral keystone blocks - The Best boral keystone blocks Prices In Australia - Page 6 | GetPrice
You searched

boral keystone blocks

Showing 101 - 120 of 1,309 results
Sort:
  1. This is a D.I.Y concrete masonry fence system that doesn’t require block laying skills. By using special split faced panel blocks which interlock without mortar you can build strong attractive boundary walls around your property. The block panels are supported by special pier blocks at panel ends and corners. Fence Stone™ can be used for small fences (only a couple of blocks high), to noise barriers 2.2m high (see design chart), or even higher if designed by your engineer. The Fence Stone™ system is manufactured with a water repellent admixture to add to its quality. Available Colours Appin Stone Charcoal 64 per pallet

    $5.19
    + Shipping
  2. Standard Block size is 190x140x390mm H x W x L Boral Series 150 Construction Block is very popular for partition wall and small load bearing wall construction Blocks are supplied by a crane type truck with unloading normally at the front of the site. Please advise if a forklift not all terrain is required. There are 120 of these blocks per pallet Each block weighs approx 13.1kg

    $3.18
    + Shipping
  3. Standard Block size is 190x140x390mm H x W x L Baines Series 150 Construction Block is very popular for partition wall and small load bearing wall construction Blocks are supplied by a crane type truck with unloading normally at the front of the site. Please advise if a forklift not all terrain is required. There are 144 of these blocks per pallet Each block weighs approx 12.2kg

    $2.65
    + Shipping
  4. The %product_name% concrete blocks are used in core filled 150mm wide wall applications where water permeability is not an issue, such as internal load bearing walls. The %product_name% have a 'knock-out' (also called a groove) in the middle of the three abridging pieces joining the two external faces of the block to allow for the easy placement of horizontal reinforcement bars. When laying the header course (the top course) the same block is used but usually turned over to allow for a flat finish to the top of the wall. %product_name% Specifications Quantity per pallet: 120 Approximate unit weight 9.1 kg Compressive Strength 15 MPa Fire Rating of load bearing walls: 120/120/120 Exposure Grade?: YES Efflorescence Potential: NIL

    $2.48
    + Shipping
  5. Gardenstone Wall Blocks were developed from our larger Norfolk Wall blocks for smaller residential projects where ease of construction and cost are more important. To make them lighter and easier to handle Gardenstone™ blocks are nearly 60% smaller than the Norfolk and hollow except for the capping blocks which are solid. The smaller size of the Gardenstone™ blocks makes them ideal for lower retaining walls, garden edging and tighter curves. 240mm Wide x 190mm Depth x 120mm High 4.2 blocks per lineal metre 35 blocks per m2 8kg each 180 blocks per pallet Available Colours Appin Stone Charcoal Oakdale

    $3.08
    + Shipping
  6. Standard Block size is 190x190x390mm H x W x L Boral Series 200 Construction Block is very popular for load bearing and non-load bearing wall construction and the construction of cantilevered walls as it is suitable for reinforced grout filling. Blocks are supplied by a crane type truck with unloading normally at the front of the site. Please advise if a forklift not all terrain is required. There are 90 of these blocks per pallet.

    $3.66
    + Shipping
  7. Half length End Block 190x190x190mm

    $2.57
    + Shipping
  8. Half Length Block 190x190x190mm

    $2.86
    + Shipping
  9. The %product_name% are the main concrete blocks used in the stretcher courses of 300mm concrete block walls. The H-Block design is used primarily for concrete core filled retaining walls and situations where the ingress of water needs to be avoided, such as carparks and basements. Unlike the standard block that consists of 2 core holes and three abridging pieces of concrete between the two faces of the block being at both ends and one in the middle, the 'H-Block' design allows for a greater opening down the middle of the wall to ensure easier reinforcement placement, cleaning of the internal mortar dags, and proper core filling. The open ended aspect of the %product_name% block also ensures an integral wall once the cores are filled, as there are no mortar joints running either vertically or horizontally through the wall from face to face (as there is when stanard blocks are used) which can easily become points of penetration for water %product_name% Specifications Quantity per pallet: 60 Approximate unit weigh - kg: 15 Compressive Strength - MPa: 15 Fire Rating of load bearing walls: 120/120/120 Exposure Grade?: YES Efflorescence Potential: NIL

    $315.42
    + Shipping
  10. Baines Coloured Capping Block

    $1.86
    + Shipping
  11. Smooth Face is the finish of the standard block but made in one of our natural colours resulting in a wall which is both attractive and economical. Smooth Face blocks are often used in combination with Split Face blocks to great aesthetic effect. All smooth coloured blocks are manufactured with a water repellent admixture to add to their quality. Quantity per pallet is 90 Available Colours Appin Stone Charcoal Oakdale Penrose Bushrock Opal White

    $2.23
    + Shipping
  12. Manufactured in accordance with AS4455 Manufactured Dimensions, mm. Length 190 Width 190 Height 90 Dimensional Deviation (AS/NZS 4456.3) Approximate Unit Weight, kg. Approx. Block Wall Density, kg/m2 (without mortar) Approximate Number of Blocks per m2 Number of Blocks per pallet 360 Compressive Strength, Code Compliant Permeability, mm/min. (AS/NZS 4456.16) Average Cold Water Absorption, % (AS/NZS 4456.14) Average Boiling Water Absorption, % (AS/NZS 4456.14) Resistance to Salt Attack – 40 cycles (AS/NZS 4456.10) Loss in NaCl Solution, grams. Loss in Na2SO4 Solution, grams. Durability Class Coefficient of Expansion, mm/m. (AS/NZS 4456.12) Coefficient of Contraction, mm/m. (AS/NZS 4456.12) Pitting Due to Lime Particles (AS/NZS 4456.13) Initial Rate of Absorption (Suction) Gross Initial Rate, kg/m2/min. (AS/NZS 4456.17) Nett Initial Rate, kg/m2/min. (AS/NZS 4456.18) Potential to Efflorescence (AS/NZS 4456.6) Fire Rating for Insulation, mins. – FRL of Loadbearing Walls with Slenderness (Srf)

    $1.69
    + Shipping
  13. Manufactured in accordance with AS4455 Manufactured Dimensions, mm. Length 390 Width 140 Height 190 Dimensional Deviation (AS/NZS 4456.3) Approximate Unit Weight, kg. 9.4 Approx. Block Wall Density, kg/m2 (without mortar) Approximate Number of Blocks per m2 Number of Blocks per pallet 120 Compressive Strength, Code Compliant Permeability, mm/min. (AS/NZS 4456.16) Average Cold Water Absorption, % (AS/NZS 4456.14) Average Boiling Water Absorption, % (AS/NZS 4456.14) Resistance to Salt Attack – 40 cycles (AS/NZS 4456.10) Loss in NaCl Solution, grams. Loss in Na2SO4 Solution, grams. Durability Class Coefficient of Expansion, mm/m. (AS/NZS 4456.12) Coefficient of Contraction, mm/m. (AS/NZS 4456.12) Pitting Due to Lime Particles (AS/NZS 4456.13) Initial Rate of Absorption (Suction) Gross Initial Rate, kg/m2/min. (AS/NZS 4456.17) Nett Initial Rate, kg/m2/min. (AS/NZS 4456.18) Potential to Efflorescence (AS/NZS 4456.6) Fire Rating for Insulation, mins. – FRL of Loadbearing Walls with Slenderness (Srf)

    $2.57
    + Shipping
  14. This is a D.I.Y concrete masonry fence system that doesn’t require block laying skills. By using special split faced panel blocks which interlock without mortar you can build strong attractive boundary walls around your property. The block panels are supported by special pier blocks at panel ends and corners. Fence Stone™ can be used for small fences (only a couple of blocks high), to noise barriers 2.2m high (see design chart), or even higher if designed by your engineer. The Fence Stone™ system is manufactured with a water repellent admixture to add to its quality. Available Colours Appin Stone Charcoal

    $5.19
    + Shipping
  15. Brick Ties, Brick veneer ties, Abey brick ties, wall ties, expansion ties, brick masonary, brick wall ties, frame ties. galvanised ties, Cavity ties, brick cavity, brick wall construction, wire tie.

    $87.95
    + Shipping
  16. Various Sizes from 100mmx100mm to 230mmx230mm 100mmx100mm is available in

    $68.50
    + Shipping
  17. The patented grate is designed so that under extreme heat from bush fires it does not melt but chars and retains its structural integrity. The stainless steel mesh is retained in situ protecting the cavity from fire brands and sparks.

    $47.20
    + Shipping
  18. Rated Medium Duty Conforms AS3700 & AS2699 Overall Comes in a pack of 3

    $69.60
    + Shipping
  19. The most stylish weep hole former available. Completely stainless steel. Compliant by design with all Bushfire Attack Levels (BALs) of AS3959.

    $82.56
    + Shipping
  20. Conform to AS2699 & AS3700.Comes in a pack of 150.

    $22.99
    + Shipping
Back to top

Recently Viewed Bricks & Blocks


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.