bowers wilkins - The Best bowers wilkins Prices In Australia | GetPrice
You searched

bowers wilkins

Showing 1 - 20 of 81 results
Sort:
  1. B&W P7 Head Phones

    P7 - a truly immersive sound combined with the luxurious comfort and impeccable build quality you expect from Bowers & Wilkins. We’ve drawn on everything we know about speaker technology and created a new standard for portable hi-fi sound quality. DAMPING MATERIAL Damping material inside the speaker enclosure helps control and dampen internal reflections, further reducing coloration and distortion of sound. METAL END-PLATES Embossed brushed aluminium ovals signifying Bowers & Wilkins stamp of quality and attention to detail are placed on each ear-pad. Understated yet definitive, a mark of distinction. SPEAKER-LIKE DRIVE UNITS The internal speaker baskets are perforated with air vents covered with a resistive film allowing for precise control of the air-flow, resulting in a more uniform movement. LEATHER The over-ear design and snugly-fitting ear pads ensure P7 completely envelops you in sound, the genuine sheepskin leather making for uncompromising quality, fit and feel.

    Price:
    $449.95 - $449.95
  2. Bower & Wilkins 683 Speakers

    The imposing 683 is the genuine three-way speaker of the 600 Series, with a line-up of technologies and a level of performance that defies its entry-level place in the market. For large rooms, two 683s make a formidable partnership, either for stereo hi-fi or fronting a home theatre installation. Features: - 1 x 25mm (1") tube-loaded aluminium dome high-frequency - 1 x 150mm (6") Kevlar® brand fibre FST midrange - 2 x 165mm (6.5") Aluminium/ Paper/ Kevlar® cone bass Sensitivity: 90dB spl (2.83v/1 metre) - Frequency Response: 38Hz - 22kHz ±3dB on reference axis - Frequency Range: -6dB @ 30Hz and 50kHz - Crossover Frequency: 350Hz, 4kHz - Nominal Impedance: 8 (minimum 3.0) - Recommended Amplifier: 25W - 200W into 8 ohm on unclipped programme - Dimensions (H x W x D): 985mm x 198mm x 340mm

    Price:
    $2499
  3. Bowers & Wilkins P5 Headphones

    Get closer to your favourite music wherever you are with P5, the noise-isolating headphones from the makers of the Zeppelin iPod speaker. With remarkably natural sound and a luxuriously comfortable fit, they make longer listening sessions a pleasure. - Ultra-linear, neodymium magnets - Highly optimised mylar drive units for an engaging sound - Minimum compression and distortion - Noise-isolating design for use on the move - Metal and sealed-leather construction - Maximum comfort, for life-long listening - Cable with Apple Remote and Mic for speech and device control - Audio cable with gold-plated 3.5 mm plug - 3.5 mm to 6.3 mm adaptor - Protective cloth storage bag - Magnetically attached ear pads - Easily switch between the standard and MFI cable

    Price:
    $339
  4. Bower & Wilkins MT50 Speakers

    Description 2-way vented-box system Drive units 1x 25mm (1in) aluminium dome high-frequency, 1x 100mm (4in) woven glass fibre cone bass / midrange Frequency range -6dB at 55Hz and 50kHz Frequency response 64Hz - 23kHz ±3dB on reference axis Dispersion Within 2dB of reference response,Horizontal: over 60? arc, Vertical: over 10? arc Sensitivity 85dB spl (2.83V, 1m) Harmonic distortion 2nd and 3rd harmonics (90dB, 1m), <1% 120Hz - 30kHz Nominal impedance 8? (minimum 4.0?) Crossover frequency 4kHz Recommended amplifier power 20W - 100W into 8? on unclipped programme Dimensions Height: 248mm (9.8in), Width: 114mm (4.5in), Depth: 162mm (6.4in), Mounted on table stand Net weight 2.3kg

    Price:
    $2397 - $2399
  5. Bowers Wilkins ASW608 Speaker

    In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.

    Price:
    $629 - $749
  6. Bowers & Wilkins MT60D Speakers

    Drive units 1x ?25mm (1in) metal dome high-frequency 1x ?100mm (4in) woven glass fibre cone bass/midrange Sensitivity 85dB spl (2.83V, 1m) Nominal impedance 8ohm (minimum 4ohm) Crossover frequency 4kHz Recommended amplifier power 20W – 100W into 8ohm on unclipped programme Height 248mm (9.8in) Width 114mm (4.5in) Depth 162mm (6.4in) Net weight 2.3kg (5lb)

    Price:
    $3349 - $3949
  7. Bowers & Wilkins ASW610 Subwoofer

    The ASW610's long-throw 250mm driver allows it to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool. Specifications: - Description: Active closed-box subwoofer system - Drive unit: ?250mm (10 in) paper/Kevlar® cone long-throw - Frequency range: -6dB at 20Hz and 25/140Hz adjustable (EQ at A) - Frequency response: ±3dB 27Hz – 40/140Hz adjustable (EQ at A) - Bass Extension: -6dB at 20Hz (position A) -6dB at 25Hz (position B) -6dB at 30Hz (position C) - Power output: 200W - Rated power consumption: 40W / 0.5W standby - Input impedance: 33k? - Signal / noise: >90dB - Inputs: - Line In (RCA Phono) - Speaker in (Binding post) - 12v trigger (3.5mm jack) - Low-pass filter - Active 4th-order, variable cut-off frequency - Dimensions: - Height: 310mm (12.2 in) not including feet - Width: 310mm (12.2 in) - Depth: 375mm (14.8 in) including grille and…

    Price:
    $849 - $999
  8. Bower & Wilkins MT55 Speakers

    Paper/Kevlar® cone drive unit 200W ICEpower® amplifier Active closed-box subwoofer system ?250mm (10 in) paper/Kevlar® cone long-throw -6dB at 20Hz and 25/140Hz adjustable (EQ at A) ±3dB 27Hz – 40/140Hz adjustable (EQ at A) -6dB at 20Hz (position A) -6dB at 25Hz (position B) -6dB at 30Hz (position C) Power output: 200W Consumption: 40W/0.5W standby Input impedance: 33kohms Signal / noise: >90dB Functions: Volume level (line in) Volume level (speaker in) Low-pass filter frequency (line in only) Low-pass filter bypass Bass extension Bass roll-off alignment Auto sense on/standby Phase switch Inputs: Line In (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack).

    Price:
    $2199 - $2749
  9. Bowers & Wilkins CCM362 Speakers

    Model CCM362 Description 2-way in-ceiling system Drive units 1x 160mm (6in) Polypropylene cone bass/midrange 1x 25mm (1in) soft dome tweeter Frequency Range (-6dB) 50Hz - 30kHz Sensitivity SPL (2.83V, 1m) 89dB Impedance Nominal (min) 8? (5.0?) Power Handling 80W

    Price:
    $345 - $369
  10. Bowers & Wilkins PV1D Subwoofer

    When you’ve pushed the boundaries of technological design further than anyone thought possible, what do you do? Simple: you keep pushing. The PV1 has long been regarded as something of an icon in domestic subwoofer design, both for its striking shape and superlative sonic performance. But by introducing a digital dimension for the upgraded PV1D, we think we’ve gone one better. Drive units: - 2x ?200mm (8in) paper/Kevlar®/aluminium cone long-throw Amplifier: Power output: 400W - Rated power: consumption: 150W - Standby power: consumption: <1W - Input impedance: 100kohm - Signal / noise: >100dB - Functions: 5 Presets - Input sensitivity (analogue) - Gain (digital) - Low-pass filter frequency - Low-pass filter slope - Low-pass filter phase - Auto on/standby - Trigger on/standby - Trigger preset switching - RS-232 automation control - Inputs: Stereo Line In (2x RCA Phono) - Speaker Level In Dimensions/Weight: - Height: 342mm (13.5in) - Width: 270mm (10.6in) - Depth: 358mm (14.1in) -…

    Price:
    $1949 - $2299
  11. Bowers & Wilkins CCM683 Speaker

    The CCM683 shares most of the high-performance features of the CCM 682, but has a slightly lower maximum amp power of 130W. Like the CCM682, this speaker comes with a 200mm (8in) Kevlar cone bass/midrange driver with a rigid die-cast chassis, a Nautilus swirl-loaded aluminium dome tweeter that pivots for adjustable off-axis treble response, and a three-position EQ switch.

    Price:
    $1198 - $1199
  12. Bowers Wilkins ASW610XP Speaker

    The ASW610XP, the most powerful of the 600 Series subwoofers, delivers the finishing touch – or finishing thump – to a hi-fi or home theatre system for larger rooms. Serious bass power is developed in a compact cabinet thanks to the unit’s twin 200W amplifiers and dual voice coil, long-throw 250mm driver. Equipped with audiophile-standard Class D circuitry, the unit remains cool and efficient under pressure.

    Price:
    $849 - $1799
  13. Bowers & Wilkins CCM382 Speakers

    2-way 1 inch Tweeter 8 inch woofer Frequency range: 45Hz-30kHz (-6dB) Resilience: 80W Impedance: 8? Sensitivity: 90dB Dimensions (HxWxD): 290x290x85mm

    Price:
    $495 - $529
  14. Bowers & Wilkins M1 Speakers

    Sleek, compact, yet packing a powerful punch, the M-1 satellite speaker can be used on its own, with a subwoofer in a 2.1 system, or as the backbone of our Mini Theatre systems. From the inside out, the M-1 was conceived as a unified system. Its design has evolved in a totally integrated way, from the custom-made crossover to the two-piece clamshell cabinet. Drive units: - 1x ?25mm (1in) metal dome high-frequency - 1x ?100mm (4in) woven glass fibre cone bass/midrange - Sensitivity: 85dB spl (2.83V, 1m) - Nominal impedance: 8? (minimum 4?) - Crossover frequency: 4kHz - Recommended amplifier power: 20W – 100W into 8? on unclipped programme - Height: 248mm (9.8in) - Width: 114mm (4.5in) - Depth: 162mm (6.4in) - Net weight: 2.3kg (5lb) including table stand

    Price:
    $466
  15. Bowers & Wilkins PV1DW Speaker

    The PV1D?s inherent stability means it can be pushed just that bit further. The symmetrical mounting of its twin drive units keeps the subwoofer perfectly balanced and anchored to the floor. So there?s no rattle when it rumbles. The back-to-back arrangement also further improves the distribution of pressure inside the speaker. Coupled to an all-new amplifier generating 400 watts of power, the drivers have the dynamics and control to deliver all a subwoofer should. A big sound from a small bubble.

    Price:
    $1949
  16. Bowers & Wilkins M1W Speaker

    Sleek, compact, yet packing a powerful punch, the M-1 satellite speaker can be used on its own, with a subwoofer in a 2.1 system, or as the backbone of our Mini Theatre systems. From the inside out, the M-1 was conceived as a unified system. Its design has evolved in a totally integrated way, from the custom-made crossover to the two-piece clamshell cabinet.And now, following a complete technological overhaul, including all-new drive units designed in-house, it sounds better than ever. Dispersion has increased. Imaging is pin-point accurate. Performance is now full range. In fact, the improvement is such that a single pair of M-1s could happily take on the role of your dedicated stereo speakers. The speaker’s versatility allows it to adapt perfectly to any home environment, no matter how awkward the space. You can put the M-1 on a bookshelf. Or mount it on a wall. Or position it on its own floor-length stand. It can even swivel to a horizontal position, for when you want to use one as…

    Price:
    $330
  17. Bowers & Wilkins CCM662 Speaker

    The top 6in in-ceiling speaker in the CI 600 series. This high-performance speaker features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response. Other highlights include a bass/midrange driver with a rigid die-cast chassis, a three-position EQ switch, superior crossover components, gold plated terminals and an impressive maximum amp power of 150W. Installation couldn?t be easier, thanks to our QuickDogs? fixing system and plug-and-play connection.

    Price:
    $1198 - $1199
  18. Bowers & Wilkins M1 Speaker

    Forming the basis of a completely revised Mini Theatre concept, the new M-1 combines a cleaner aesthetic with dramatically improved performance. Combine it with either the ASW608 or the new PV1D subwoofer to create a home theatre experience with superb integration and impressive power for such a discreet system. Plus, its more extended bass response allows M-1 to be used on its own for two-channel applications. Mount the speaker as shown on a table or shelf. Alternatively, a bracket is included for wall mounting and a floor stand is available as an optional extra.

    Price:
    $330
  19. Bowers & Wilkins CCM682 Speaker

    A high performance ceiling-mount speaker featuring a 200mm (8in) Kevlar cone bass/midrange driver with a rigid die-cast chassis, and a Nautilus swirl-loaded aluminium dome tweeter that pivots for adjustable off-axis treble response. A 30mm coil and 100mm magnet make this an incredibly efficient and reliable speaker, with outstanding sound quality and a maximum amp power of 150W. Other features include superior crossovers components, gold plated terminals and a three-position EQ switch.

    Price:
    $1398 - $1399
  20. Bowers Wilkins M1 Speaker

    The M-1 has been engineered with the same design attributes and ethos as B&W’s larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet.

    Price:
    $330
Back to top

Recently Viewed Speakers


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.