campagnolo over torque bb - The Best campagnolo over torque bb Prices In Australia | GetPrice
You searched

campagnolo over torque bb

Showing 1 - 20 of 92 results
Sort:
  1. C-Bear Bottom Bracket - BB386-R - Campagnolo Over Torque, FSA BB386, Clavicula - RACE.

    $229.00
    + Shipping
  2. PF41-30-R - Press Fit BB86 - for Campagnolo Over Torque, FSA, Clavicula, Rotor - RACE.

    $310.00
    + Shipping
  3. Campagnolo wins Red Dot Award 2015 The Super Record EPS 2015 electronic groupset has won the prestigious reddot Award: Best of the Best

    $51.78
    + Shipping: $14.03
  4. OPTIMAL POSITIONING OF THE BALL BEARING SEAT Reduces friction to the minimum, reduces mechanical stress, and protects the ball bearings from water and dust to assure consistent performance over time. OPTIMISED U AND Q FACTORS Space optimised between ankle and crank - maximum lateral and torsional stiffness.

    $330.99
    FREE shipping
  5. Full-carbon cranksLight alloy fixing boltsLight alloy chainrings with XPSS (eXtreme Performance Shifting System)Chainrings have protective anodisation treatment8 pins on the large chainringIntegrated Ultra-Torque semi-axlesRequires Campagnolo Ultra-Torque BB cupsWeight: 667g

    17%
    Off
    $639.00
    FREE shipping
  6. Campagnolo Power Torque tool set for crank removal and bearing installation 1626.1AHow to use the tool: Tool set 1626.1A is used together with 1626/2 Campagnolo Ultra Torque bearing removal and installation set. It's used to remove the Power Torque standard cranks and install & remove bearings on this crank.

    17%
    Off
    $30.00
    + Shipping: $12.00
  7. Campagnolo pro-tools UT-BB110 Ultra-Torque Gasket Wrench

    17%
    Off
    $22.48
    + Shipping: $12.00
  8. C-BEAR CAMPAGNOLO BBL BEARING SET FOR ULTRA TORQUE - RACE.

    $189.00
    + Shipping
  9. Campagnolo FC-RE007 Ultra-Torque Crankset Fixing Bolt

    17%
    Off
    $23.00
    + Shipping: $12.00
  10. Designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks.The bearing pullers forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system pulls the bearing.The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.

    17%
    Off
    $110.00
    FREE shipping
  11. Designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks. The bearing pullers forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system pulls the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.NOTE: The C-clip on the crank spindle must be removed before the puller is installed and the bearing is removed.

    25%
    Off
    $79.00
    + Shipping: $12.00
  12. Installation of the Ultra Torque Record BB cups requires the Park BBT-9 toolAvailable in English (68mm) or Italian (70mm) bottom bracket shell sizes

    17%
    Off
    $33.00
    + Shipping: $12.00
  13. material: special tool steel, hardened and tempered The tool is composed of a wrench, screw with nut and handle. To use, put the wrench onto the bottom bracket nut, so that the screw is inserted into the bottom bracket. This prevents the wrench from slipping and damaging the bottom bracket nut when applying pressure. Your work is made easy by the 350 mm long handle with a two-component ergonomic sleeve. An additional part on the screw is a 19 mm AF to be used with a 19 mm wrench and for torque checking with a torque wrench. The wrench can also be used independently with a 19 mm wrench without the screw with nut and handle.

    17%
    Off
    $95.48
    + Shipping: $12.00
  14. Technologies:"Q" and "U" factors: one of the lowest Q factor in the triple crankset segment today lets the rider maintain an extremely natural position for the knee and ankle when pedalling, while a "U" factor of 12mm ensures maximum comfort and freedom of movement.Power-Torque system: System with single axle designed to maximize stiffness and power transmission.XPSS: Exclusive design of the eight upshift zones and two downshift zones of the chainring. The specific profile of the teeth and the zones dedicated to upward and downward chain movement enable fast and precise shifting in all conditions.Hollow aluminium crank: superlative lightness.

    17%
    Off
    $334.00
    FREE shipping
  15. full-carbon unidirectional-multidirectional cranks - hollow cranks (Ultra-Hollow™ Structure) - light alloy fixing bolts and nuts - light alloy chainrings with ESP Actuation System™ (Enhanced Shifting Performance) - chainrings with hard anodization treatment - 8 pins on the large chainring - CULT™ bearings (Ceramic Ultimate Level Technology) - integrated ULTRA-TORQUE™ semi-axles - requires ULTRA-TORQUE™ BB cups cups with very low friction seals hollow structure cranks and spokes CULT™ bearings with premium grade ceramic ball bearings® asymmetrical ESP ACTUATION SYSTEM™ geometry for the chainring teeth ultralight aluminium chainrings and screws Ultra-Torque™ bottom bracket chainrings with anodization, corrosion-proof and wear-proof treatment * The nominal weight refers to the lighter specification among the available options. The weight of the hubs does not includes the quick-release. The nominal weight does not take account of the sometimes considerable quantities of grease used in the assembly of the products.

    17%
    Off
    $1,261.00
    FREE shipping
  16. The most evident changes are immediately noticed on the first shift. The new design of the chain up shift and downshift zones makes shifting extremely fast and precise. Weight: 786g

    17%
    Off
    $389.98
    FREE shipping
  17. Integrated cups: The Campagnolo solution for Athena BB30 bottom bracketsCampagnolo firmly believes in the BB30 bottom bracket but, as is our custom, instead of following the others we have taken our own path, the one that leads to the best outcome.Making the Ultra-Torque crankset oversize would have meant going against its nature and losing the characteristics and performance features that have made it the crankset preferred by cyclists over the last several years. So Campagnolo decided to take advantage of the effectiveness of that design and modify only the cups. In fact, the new Ultra-Torque integrated cups have the same bearing seat function of the already well-known Ultra-Torque cups, and replace them to make the Ultra-Torque crankset perfectly compatible with bottom bracket shells with BB30 bottom brackets. In addition, the new cups are 20 grams lighter than the standard cups. Features• Weight: 29 g • Aluminium - integrated cups for Athena BB30

    17%
    Off
    $69.89
    + Shipping: $12.00
  18. C-BEAR Bottom Bracket - BB386-CAM-UT-R - for Campagnolo Ultra Torque - RACE.

    $249.00
    + Shipping
  19. PRESS FIT BB86 - PF41-CAM-UT-R - for Campagnolo Ultra Torque - RACE.

    $189.00
    + Shipping
  20. C-BEAR Bottom Bracket - BBR-CAM-UT-R - for Campagnolo Ultra Torque - RACE

    $229.00
    + Shipping
Back to top

Recently Viewed Bicycle accessories


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.