derby salts - Compare Cheap derby salts Prices & Save on shopping in Australia
You searched

derby salts

Showing 1 - 20 of 5,621 results
Sort:
  1. Jo Malone London Wood Sage & Sea Salt Cologne 100ml EDC Unisex Cologne

    Escape The Everyday Along The Windswept Shore. Waves Breaking White The Air Fresh With Sea Salt And Spray. Alive With The Mineral Scent Of The Rugged Cliffs. Mingling With The Woody Earthiness Of Sage. Lively Spirited And Totally Joyful.

    Price
    $198 - $299
  2. Jo Malone London Wood Sage & Sea Salt 30ml EDC Unisex Cologne

    Escape The Everyday Along The Windswept Shore. Waves Breaking White The Air Fresh With Sea Salt And Spray. Alive With The Mineral Scent Of The Rugged Cliffs. Mingling With The Woody Earthiness Of Sage. Lively Spirited And Totally Joyful.

    Price:
    $98
  3. The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty. Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically. Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cart

    $275.99
    + Shipping
  4. The AQUAJET PFN 500, PFN 1000, PFN 1500 and PFN 2000 fountain pumps are intended for the pumping and filtration of water in fountains, cascades, ornamental ponds, garden ponds, and backyard swimming pools. They can also be used in other operational environments, such as gardening, household works, agriculture, animal and fish farming, construction, etc. Thanks to their compact size, high efficiency, adjustable pump capacity and, above all, the simplicity of design, AQUAJET PFN pumps are versatile, effective, durable, and easy to operate. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. The AQUAJET PFN 1000, PFN 1500 and PFN 2000 models can operate in salt water. The AQUAJET PFN 500 model is designed for indoor use. Mode of operation The AQUAJET PFN line of pumps is distinguished by very high efficiency, relative to their power. This is due to the use of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. Moreover, the latter solution allows the pumps to operate out of water (they are completely sealed) and boosts the height of water head, so that AQUAJET PFN pumps can serve as circulation pumps. For user convenience, all the models of AQUAJET PFN pumps are equipped with continuous performance control that employs an ergonomic knob placed on the outlet nozzle of the pump. Using the knob, you can effortlessly adjust the strength of water stream. Thanks to the use of ceramic rotor axes in AQUAJET PFN pumps (except for the 500 model, which has a steel axis), the pumps are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution; as a consequence, the pumps do not require frequent cleaning. AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. Cleaning the rotor slot once a month is sufficient. To prevent a drop

    $114.99
    + Shipping
  5. AQUAWORKS Power Pad works in any filter application including canister filter, inside filter, hanging filter, wet/dry filter and pond filter. Superior high purity selected activated carbon coated PowerPad quickly removes colours and odours chemically, and mechanically. Cleans the water by trapping suspended solids and contaminants outside of the tanks for disposal. Suitable for both fresh and salt water aquariums. Sealed to maintain freshness and prevent quality loss due to exposure to air. - Promotoes fish health by improving water quaity - For fresh water saltwater use - Removes organic waste and contaminants Directions: 1. No rinsing required before using 2. For the best results, use Carbon Pad continuosly 3. Replace every 2 to 4 weeks Hint: Always use in conjuction with 2 to 3 Power Pads and replace them one after another.

    $10.49
    + Shipping
  6. Pond Salt Product Description Pond Salt is a chemically sound blend of salts designed to replicate the native ionic environment of goldfish and koi without adversely impacting on pond plants when used at the recommended dosage. It can also be useful to temporarily reduce nitrite toxicity in an emergency situation. It does not impact pH. For pH control, use Pond Acid Buffer or Pond pH Buffer. Sizes: 1 kg, 2 kg, 4 kg, 20 kg Why it's Different Pond Salt is more than just a simple sodium chloride product. Other salts can burn leaves and roots in a planted pond. However, Pond Salt does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Pond Salt is a safe and effective alternative to the sodium chloride based pond salts so prevalent. Directions When setting up a pond and when making water changes: 100 g (5 tablespoons) for each 200 L. This amount will yield 0.5 ppt. Once every 6 months: 250 g (12.5 tablespoons) for each 200 L. For emergency relief of nitrite toxicity: 1 kg for each 200 L. Once nitrite toxicity has subsided a water change should be initiated to reduce salinity. (Please note: nitrite levels do not fall, only the toxicity to the fish). The presence of high levels of nitrite indicates a problem with the biofilter. Use Pond Stability to restore and maintain the pond biofilter. NOTE: To add salt to an established pond, do so gradually. Add in an area unlikely to attract fish attention (to avoid ingestion). If this cannot be avoided then it is best to dissolve the salt in freshwater before use. Do not use salt when replacing evaporated water. If following the 6 month regimen you must perform regular water changes to avoid salt build up. This product is not recommended for new ponds or water changes if source water already has a salinity above 1.0 ppt.

    $50.49
    + Shipping
  7. The AQUAJET PFN 500, PFN 1000, PFN 1500 and PFN 2000 fountain pumps are intended for the pumping and filtration of water in fountains, cascades, ornamental ponds, garden ponds, and backyard swimming pools. They can also be used in other operational environments, such as gardening, household works, agriculture, animal and fish farming, construction, etc. Thanks to their compact size, high efficiency, adjustable pump capacity and, above all, the simplicity of design, AQUAJET PFN pumps are versatile, effective, durable, and easy to operate. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. The AQUAJET PFN 1000, PFN 1500 and PFN 2000 models can operate in salt water. The AQUAJET PFN 500 model is designed for indoor use. Mode of operation The AQUAJET PFN line of pumps is distinguished by very high efficiency, relative to their power. This is due to the use of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. Moreover, the latter solution allows the pumps to operate out of water (they are completely sealed) and boosts the height of water head, so that AQUAJET PFN pumps can serve as circulation pumps. For user convenience, all the models of AQUAJET PFN pumps are equipped with continuous performance control that employs an ergonomic knob placed on the outlet nozzle of the pump. Using the knob, you can effortlessly adjust the strength of water stream. Thanks to the use of ceramic rotor axes in AQUAJET PFN pumps (except for the 500 model, which has a steel axis), the pumps are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution; as a consequence, the pumps do not require frequent cleaning. AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. Cleaning the rotor slot once a month is sufficient. To prevent a drop

    $134.99
    + Shipping
  8. AQUAWORKS Power Pad works in any filter application including canister filter, inside filter, hanging filter, wet/dry filter and pond filter. Aquaworks Polyfiber Pad Helps remove fish waste, uneaten food and debris before pollutants can breakdown into toxic chemicals. The large surface area of the polyfibre supports bacteria to convert toxic waste to harmless by products. Sheet size: 30 x 30 x 2cm - Promotoes fish health by improving water quaity - For fresh water saltwater use - Removes organic waste and contaminants Directions: 1. No rinsing required before using 2. For the best results, use Carbon Pad continuosly 3. Replace every 2 to 4 weeks Hint: Always use in conjuction with 2 to 3 Power Pads and replace them one after another.

    $8.49
    + Shipping
  9. Gold Salt Product Description Gold Salt is designed to provide the optimal environment for all goldfish species. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For pH control use Gold Buffer. Sizes: 70 g, 300 g, 4 kg, 20 kg, 100 kg Directions Use 18g (1 tablespoon) for each 40L. Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in a small amount of freshwater before use. Avoid using salt when replacing evaporated water.

    $21.49
    + Shipping
  10. Cichlid Lake Salt Product Description Cichlid Lake Salt is a chemically sound blend of salts designed to replicate the natural environment of Cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide. It does not contain harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium. Use Seachem's Cichlid Trace to restore and maintain important trace elements between water changes. Sizes: 250 g, 500 g, 1.4 kg, 4 kg, 20 kg, 100 kg Why It's Different Although the major Rift Lakes contain basically the same mineral salts, they do so in greatly differing concentrations. Cichlid Lake Salt is formulated so that dosages vary depending on the lake of origin and need only be added when setting up an aquarium or with water changes. Many competing products are little more than combinations of Epsom salt and bicarbonate of soda. This will not provide a complete replication of the mineral salts that are contained in the lakes of Africa, in particular calcium and potassium. Directions All doses given for 40 L. TANGANYIKA: Use 11 g (1.5 teaspoons). MALAWI: Use 5.5 g (3/4 teaspoons). VICTORIA: Use 3.6 g (1/2 teaspoon). pH BUFFERING: Seachem's Tanganyika Buffer (pH 9.0?9.4) and Malawi/Victoria Buffer (pH 7.8?8.4) should be used to adjust carbonate hardness and pH. TIPS: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use. Guaranteed Analysis Calcium (min) 3.24 % Calcium (max) 3.50 % Magnesium (min) 11.83 % Potassium (min) 10.08 % Sodium (min) 3.53 % Sodium (max) 3.75 % Aluminum (min) 0.90 mg Iodine (min) 0.02 mg Iron (min) 0.20 mg Amounts per 1 gram. Ingredients: magnesium chloride, calcium chloride, potassium sulfate, sodium chloride, aluminum sulf

    $43.49
    + Shipping
  11. Pond Salt Product Description Pond Salt is a chemically sound blend of salts designed to replicate the native ionic environment of goldfish and koi without adversely impacting on pond plants when used at the recommended dosage. It can also be useful to temporarily reduce nitrite toxicity in an emergency situation. It does not impact pH. For pH control, use Pond Acid Buffer or Pond pH Buffer. Sizes: 1 kg, 2 kg, 4 kg, 20 kg Why it's Different Pond Salt is more than just a simple sodium chloride product. Other salts can burn leaves and roots in a planted pond. However, Pond Salt does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Pond Salt is a safe and effective alternative to the sodium chloride based pond salts so prevalent. Directions When setting up a pond and when making water changes: 100 g (5 tablespoons) for each 200 L. This amount will yield 0.5 ppt. Once every 6 months: 250 g (12.5 tablespoons) for each 200 L. For emergency relief of nitrite toxicity: 1 kg for each 200 L. Once nitrite toxicity has subsided a water change should be initiated to reduce salinity. (Please note: nitrite levels do not fall, only the toxicity to the fish). The presence of high levels of nitrite indicates a problem with the biofilter. Use Pond Stability to restore and maintain the pond biofilter. NOTE: To add salt to an established pond, do so gradually. Add in an area unlikely to attract fish attention (to avoid ingestion). If this cannot be avoided then it is best to dissolve the salt in freshwater before use. Do not use salt when replacing evaporated water. If following the 6 month regimen you must perform regular water changes to avoid salt build up. This product is not recommended for new ponds or water changes if source water already has a salinity above 1.0 ppt.

    $32.99
    + Shipping
  12. AQUAWORKS Power Pad works in any filter application including canister filter, inside filter, hanging filter, wet/dry filter and pond filter. - Promotoes fish health by improving water quaity - For fresh water saltwater use - Removes organic waste and contaminants Directions: 1. No rinsing required before using 2. For the best results, use Carbon Pad continuosly 3. Replace every 2 to 4 weeks Hint: Always use in conjuction with 2 to 3 Power Pads and replace them one after another.

    $9.99
    + Shipping
  13. The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty. Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically. Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cart

    $199.99
    + Shipping
  14. API AQUARIUM SALT AQUARIUM SALT supplies the electrolytes fish need to help them breathe easier and remain healthy in their new surroundings Benefits: Promotes fish health Improves gill function; making it easier for fish to breathe Provides essential electrolytes fish need to reach peak coloration and vitality Reduces stress Facilitates osmoregulation Promotes disease recovery Follow API Easy Care Guide and use AQUARIUM SALT when: Starting a new aquarium When doing water changes Solving fish problems Electrolytes are essential for the uptake of oxygen and the release of carbon dioxide and ammonia through the gills. A lack of electrolytes may cause serious health problems. API AQUARIUM SALT, made from evaporated sea water, provides these essential electrolytes. AQUARIUM SALT does not evaporate, and is not filtered out, so it should only be added with each water change. Care should be taken when using salt with live plants, as some plants may be sensitive. Directions: Add 1 rounded tablespoon for every 5 U.S. gallons or ½ rounded teaspoon for every U.S. gallon of aquarium water. API AQUARIUM SALT AVAILABE IN: Treats: 16oz./454g Up to 107 U.S. gallons of fresh water 32oz./936g Up to 220 U.S. gallons of fresh water 65oz./1840g Up to 434 U.S. gallons of fresh water

    $11.99
    + Shipping
  15. The AQUAJET PFN 500, PFN 1000, PFN 1500 and PFN 2000 fountain pumps are intended for the pumping and filtration of water in fountains, cascades, ornamental ponds, garden ponds, and backyard swimming pools. They can also be used in other operational environments, such as gardening, household works, agriculture, animal and fish farming, construction, etc. Thanks to their compact size, high efficiency, adjustable pump capacity and, above all, the simplicity of design, AQUAJET PFN pumps are versatile, effective, durable, and easy to operate. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. The AQUAJET PFN 1000, PFN 1500 and PFN 2000 models can operate in salt water. The AQUAJET PFN 500 model is designed for indoor use. Mode of operation The AQUAJET PFN line of pumps is distinguished by very high efficiency, relative to their power. This is due to the use of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. Moreover, the latter solution allows the pumps to operate out of water (they are completely sealed) and boosts the height of water head, so that AQUAJET PFN pumps can serve as circulation pumps. For user convenience, all the models of AQUAJET PFN pumps are equipped with continuous performance control that employs an ergonomic knob placed on the outlet nozzle of the pump. Using the knob, you can effortlessly adjust the strength of water stream. Thanks to the use of ceramic rotor axes in AQUAJET PFN pumps (except for the 500 model, which has a steel axis), the pumps are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution; as a consequence, the pumps do not require frequent cleaning. AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. Cleaning the rotor slot once a month is sufficient. To prevent a drop

    $84.99
    + Shipping
  16. The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty. Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically. Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum. The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35° C. Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cart

    $169.99
    + Shipping
  17. Brackish Salt Product Description Brackish Salt is a blend of specific salts designed to accurately duplicate the natural environment of live bearing and brackish water fish. Sizes: 300 g, 600 g, 4 kg, 20 kg, 100 kg Why It's Different Unlike other aquarium salts currently available to the hobbyist, Brackish Salt is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent Directions Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water. - For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L. - For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L. - For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datinoides), use 40 g (~2 tablespoons) per 12 L. - For scats, use up to 80 g (~4 tablespoons) per 12 L. This dose is not for planted aquaria. - For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or reference an atlas. - For general aquarium salt use (either for mineral replacement or disease control), use 20?g (~1 tablespoon) for each 40 L.

    $14.99
    + Shipping
  18. AQUAWORKS Power Pad works in any filter application including canister filter, inside filter, hanging filter, wet/dry filter and pond filter. - Promotoes fish health by improving water quaity - For fresh water saltwater use - Removes organic waste and contaminants Directions: 1. No rinsing required before using 2. For the best results, use Carbon Pad continuosly 3. Replace every 2 to 4 weeks Hint: Always use in conjuction with 2 to 3 Power Pads and replace them one after another.

    $9.99
    + Shipping
  19. API AQUARIUM SALT AQUARIUM SALT supplies the electrolytes fish need to help them breathe easier and remain healthy in their new surroundings Benefits: Promotes fish health Improves gill function; making it easier for fish to breathe Provides essential electrolytes fish need to reach peak coloration and vitality Reduces stress Facilitates osmoregulation Promotes disease recovery Follow API Easy Care Guide and use AQUARIUM SALT when: Starting a new aquarium When doing water changes Solving fish problems Electrolytes are essential for the uptake of oxygen and the release of carbon dioxide and ammonia through the gills. A lack of electrolytes may cause serious health problems. API AQUARIUM SALT, made from evaporated sea water, provides these essential electrolytes. AQUARIUM SALT does not evaporate, and is not filtered out, so it should only be added with each water change. Care should be taken when using salt with live plants, as some plants may be sensitive. Directions: Add 1 rounded tablespoon for every 5 U.S. gallons or ½ rounded teaspoon for every U.S. gallon of aquarium water. API AQUARIUM SALT AVAILABE IN: Treats: 16oz./454g Up to 107 U.S. gallons of fresh water 32oz./936g Up to 220 U.S. gallons of fresh water 65oz./1840g Up to 434 U.S. gallons of fresh water

    $7.49
    + Shipping
  20. American Cichlid Salt Product Description American Cichlid Salt is a chemically sound blend of salts designed to replicate the natural environment of American cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide. It does not contain harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium. Use Seachem's Cichlid Trace to restore and maintain important trace elements between water changes. Sizes: 50 g, 250 g, 20 kg Why It's Different American Cichlid Salt is formulated so that dosages vary depending on the species origin and need only be added when setting up an aquarium or with water changes. Directions All doses given for 110 L. SOUTH AMERICAN: Use 2.5 g (1/2 teaspoon). CENTRAL AMERICAN: Use 1.25 g (1/4 teaspoon). BUFFERING: Acid Regulator (pH 4.5-5.8) and Neutral Regulator (pH 7.0) should be used to adjust pH. TIPS: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use. Guaranteed Analysis Calcium (min) 15.0 % Calcium (max) 17.0 % Magnesium (min) 3.0 % Potassium (min) 6.0 % Sodium (min) 8.0 % Sodium (max) 10.0 % Aluminum (min) 0.90 mg Iodine (min) 0.02 mg Iron (min) 0.20 mg Amounts per 1 gram. Ingredients: magnesium chloride, calcium chloride, potassium sulfate, sodium chloride, aluminum chloride, iron sulfate, potassium iodide,

    $20.99
    + Shipping
Back to top

Recently Viewed Mens Casual Shoes


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.