Cheapest prices for vitamin & nutrition products and delivery | Getprice - Compare Prices & Save in Australia
You searched

germanium

Showing 1 - 2 of 2 results
Sort:
  1. Derwent Watercolour Pencil Germanium Lake

    This Derwent Watercolour Pencil features a soft water soluble strip which is ideal for painting, drawing and mixed media work. the colour is highly pigmented for maximum colour purity and is lightfast so your art will last for time to come. The barrel has a hexagonal shape making it ideal for greater control with detailed work.

    $3.29
    + Shipping
    Go to shop
  2. Allergy Research Group, Organic Germanium - 50 Vegetarian Capsules

    -->Product DetailsSupplement Facts, Supplement FactsServing Size: 1 CapsuleServings per Container: 50Amount Per Serving% Daily ValueBis-Carboxyethyl Germanium Sesquioxide150 mg**Daily value not established.Other Ingredients: Hydroxypropyl methylcellulose, Cellulose, L-leucine., WarningsKeep in a cool, dry place, tightly capped, , , , , Allergy Research Group Organic Germanium Description, HypoallergenicGermaniumDietary SupplementVegetarian Capsules, , Pure Ge-132 Organic Germanium is a unique organogermanium compound, bis-carboxyethyl germanium sesquioxide, sometimes called just germanium sesquioxide. It has unique molecular characteristics which make it virtually unreactive in the body, and its small particle size and unique structure permit it to be readily cleared in the urine as the intact molecule. , , Directions, Suggested Use: As a dietary supplement, 1 capsule one to five times daily between meals, or as directed by a healthcare practitioner., , , Disclaimer, These statements have not been evaluated by the FDA. These products are not intended to diagnose, treat, cure, or prevent any disease., prodOverview-wrapper

    $126.95
    + Shipping
    Go to shop
  3. More results from our partners

    Silicon-Germanium Strained Layers and Heterostructures: Volume 74 by M. Willander

    Free Delivery Worldwide : Silicon-Germanium Strained Layers and Heterostructures: Volume 74 : Hardback : Elsevier Science Publishing Co Inc : 9780127521831 : 0127521836 : 20 Oct 2003 : The study of Silicone Germanium strained layers has implications for material scientists and engineers, in particular those working on the design and modelling of semi-conductor devices. This work describes its developments in technology and modelling. It also includes a bibliography of over 400 papers providing an overview of the subject.

    $319.31
    FREE shipping
    Go to shop

    Silicon Germanium by Raminderpal Singh

    Free Delivery Worldwide : Silicon Germanium : Hardback : John Wiley and Sons Ltd : 9780471446538 : 047144653X : 10 Nov 2003 : An excellent introduction to the SiGe BiCMOS technology, from the underlying device physics to current applications. -Ron Wilson, EETimes SiGe technology has demonstrated the ability to provide excellent high-performance characteristics with very low noise, at high power gain, and with excellent linearity.

    $221.75
    FREE shipping
    Go to shop

    Germanium Silicon: Physics and Materials: Volume 56 by Robert K. Willardson

    Free Delivery Worldwide : Germanium Silicon: Physics and Materials: Volume 56 : Hardback : Elsevier Science Publishing Co Inc : 9780127521640 : 012752164X : 16 Nov 1998 : Suitable for physicists, chemists, materials scientists, and device engineers in modern industry.

    $236.88
    FREE shipping
    Go to shop

    The Chemistry of Organic Germanium, Tin and Lead Compounds by Saul Patai

    Free Delivery Worldwide : The Chemistry of Organic Germanium, Tin and Lead Compounds : Hardback : John Wiley and Sons Ltd : 9780471942078 : 0471942073 : 06 Nov 1995 : This volume covers such topics as the nature of the C-M bond; structural, spectroscopic and synthetic chemistry; pharmacology; toxicology; safety; and environmental aspects. The work should benefit the synthetic chemistry community as well as scientists working in organometallics.

    $655.78
    FREE shipping
    Go to shop

    The Chemistry of Organic Germanium, Tin and Lead Compounds by Zvi Rappoport

    Free Delivery Worldwide : The Chemistry of Organic Germanium, Tin and Lead Compounds : Hardback : John Wiley and Sons Ltd : 9780471497387 : 047149738X : 17 Jan 2003 : Organic compounds of Ge, Sn, and Pb have many properties that can be useful for such things as microbiocides, pesticides, anti-cancer treatments, octane number enhancers, and anti-foaming agents. This supplementary volume covers the most recent advances in the fields of photochemistry and structural chemistry.

    $3,967.34
    FREE shipping
    Go to shop

    Semiconductors and the Information Revolution by John W. Orton

    Free Delivery Worldwide : Semiconductors and the Information Revolution : Paperback : ELSEVIER SCIENCE & TECHNOLOGY : 9780444532404 : 0444532404 : 24 Aug 2009 : Explains the development of modern electronic systems and devices from the viewpoint of the semiconductor materials (germanium, silicon, gallium arsenide and many others) which made them possible. This title covers the scientific understanding of these materials and its intimate relationship with their technology and applications.

    $33.84
    FREE shipping
    Go to shop

    Hydride Generation Atomic Absorption Spectrometry by Jiri Dedina

    Free Delivery Worldwide : Hydride Generation Atomic Absorption Spectrometry : Hardback : John Wiley and Sons Ltd : 9780471953647 : 0471953644 : 08 Jun 1995 : Antimony, arsenic, bismuth, germanium, lead, selenium, tellurium and tin just some of the elements which, in trace amounts, have biological, environmental and technological importance.

    $960.06
    FREE shipping
    Go to shop

    Organometallic Compounds of Low-Coordinate Si, Ge, Sn and Pb by Vladimir Ya Lee

    Free Delivery Worldwide : Organometallic Compounds of Low-Coordinate Si, Ge, Sn and Pb : Hardback : John Wiley and Sons Ltd : 9780470725436 : 0470725435 : 21 Sep 2010 : * First book on the emerging area of the low-coordinate compounds of the heavier group 14 elements silicon, germanium, tin and lead * Written by leading experts in the field: In 2006 Professor Sekiguchi received the Kipping Award, the most important prize in the field of silicon chemistry.

    $201.76
    FREE shipping
    Go to shop

    Electrostatic Discharge (ESD) by Steven H. Voldman

    Free Delivery Worldwide : Electrostatic Discharge (ESD) : Hardback : John Wiley and Sons Ltd : 9780470847534 : 0470847530 : 15 Nov 2004 : Addresses Electrostatic Discharge (ESD) physics, devices, circuits and design across the full range of integrated circuit technologies. This book provides a treatment of the ESD phenomenon and the physics of devices operating under ESD conditions. It contains advanced CMOS, Silicon On Insulator, Silicon Germanium, and Silicon Germanium Carbon.

    $165.77
    FREE shipping
    Go to shop

    Nihon Superior 0.8Mm Lead Free Solder 500G

    LEAD FREE SOLDER – NIHON SUPERIOR SN100C Successfully Tried and Tested Leading electronics manufacturers throughout the world have used SN100C with outstanding results. To date, millionsof circuit boards have been assembled with the SN100C familyof solders in all types of products. Many of the devices soldered with SN100C already have been in use for several years. Download the Nihon Flux-Cored Solder Wire product catalogue [1.66mb] Nihon Superior have developed SN100C 030 solder wire. One of its major points is that it is the only lead free alloy that looks and flows like normal tin/lead. SN100C is comprised of Sn/Cu/Ni + Ge. (TIN, COPPER, NICKEL & GERMANIUM) The flux-cored solder wire enables fast soldering with less carbonizing of soldering tip and less flux spatter providing greater productivity than existing products. SN100C (030) lead-free flux-cored solder wire provides sharp spreading and good separation. The high-reliability alloy suits fine-pitch application. It contributes to higher economic productivity with its improved efficiency over conventional products. SN100C (030) also reduces bridging in soldering extra-fine coaxial harnessing in cell phones. The alloy (Sn0.7Cu0.05Ni Ge) has a 0.1-mm diameter. SN100C (030) inhibits growth of the intermetallic layer and lowers copper erosion. Its highly ductile properties accommodate for strain on joints. Key Benifits Include: Shiny Lead Free Solder Joints Less Tip Carbonizing Less Flux Spatter Less Cracking of Flux Residue Fast Soldering Fast Melting Good Spread Less Shrinkage Defect, Reduced Copper Erosion, and Stable Intermetallic Layer Substantial cost advantage FEATURES: SN100C was developed by Nihon Superior in Japan and offers high-throughput and the lowest cost of ownership as compared to any other lead-free solder alloy. Appearance: Besides the obvious benefits of being lead-free, this solder has a shiny appearance similar to tin/lead. This makes it easy to identify dry solder joints, which appear cloudy, a feature that other lead-free solders do not have. Alloy Composition: Sn-Cu0.7-Ni0.05+Ge – Does not contain costly silver or bismuth. Exact Melting Point of 227°C (True Eutectic) Bridge-free and icicle-free soldering. Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate. High Fluidity (Less Rework) Low drossing alloy. – Dross rate equal or lower than tin-lead solder Reliable joints (no reported failures in 7 years of field service). Low copper pad erosion. – Does not erode copper from holes, pads and tracks Low rate of copper leaching makes it easy to controlthe copper content of the solder bath Does not require a nitrogen atmosphere. Low aggressiveness to soldering equipment. – Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys Good through-hole penetration Good topside fillet formation Thermal fatigue resistance and creep strength betterthan tin-lead Slow, even growth of the intermetallic layer at the solder/substrate interface Also performs well in selective and dip soldering Over 800 tons consumed each month worldwide. SPECIFICATIONS: Material Property SN100C Test method Melting Temperature [°C] Solidus   227 Ramp ratefor different thermal analysis   20°/min Liquidus  227 S.G. 7.4 S.G. measuring apparatus 25° Specific Heat 220 Estimated value Thermal conductivity 64 Estimated value Vickers Hardness Slow cooling 16.1 Cast onto aluminum plate Fast cooling 12.9 Cast onto insulating brick Tensile strength 32 10mm/min. (25°) Elongation [%] 48 10mm/min. (25°) Electrical resistance 0.13 For Terminal method (25°)   Material Property SN100C Test method Coefficient  of                

    $69.00
    + Shipping
    Go to shop

    Nihon Superior 0.6Mm Lead Free Solder 500G

    LEAD FREE SOLDER – NIHON SUPERIOR SN100C Successfully Tried and Tested Leading electronics manufacturers throughout the world have used SN100C with outstanding results. To date, millionsof circuit boards have been assembled with the SN100C familyof solders in all types of products. Many of the devices soldered with SN100C already have been in use for several years. Download the Nihon Flux-Cored Solder Wire product catalogue [1.66mb] Nihon Superior have developed SN100C 030 solder wire. One of its major points is that it is the only lead free alloy that looks and flows like normal tin/lead. SN100C is comprised of Sn/Cu/Ni + Ge. (TIN, COPPER, NICKEL & GERMANIUM) The flux-cored solder wire enables fast soldering with less carbonizing of soldering tip and less flux spatter providing greater productivity than existing products. SN100C (030) lead-free flux-cored solder wire provides sharp spreading and good separation. The high-reliability alloy suits fine-pitch application. It contributes to higher economic productivity with its improved efficiency over conventional products. SN100C (030) also reduces bridging in soldering extra-fine coaxial harnessing in cell phones. The alloy (Sn0.7Cu0.05Ni Ge) has a 0.1-mm diameter. SN100C (030) inhibits growth of the intermetallic layer and lowers copper erosion. Its highly ductile properties accommodate for strain on joints. Key Benifits Include: Shiny Lead Free Solder Joints Less Tip Carbonizing Less Flux Spatter Less Cracking of Flux Residue Fast Soldering Fast Melting Good Spread Less Shrinkage Defect, Reduced Copper Erosion, and Stable Intermetallic Layer Substantial cost advantage FEATURES: SN100C was developed by Nihon Superior in Japan and offers high-throughput and the lowest cost of ownership as compared to any other lead-free solder alloy. Appearance: Besides the obvious benefits of being lead-free, this solder has a shiny appearance similar to tin/lead. This makes it easy to identify dry solder joints, which appear cloudy, a feature that other lead-free solders do not have. Alloy Composition: Sn-Cu0.7-Ni0.05+Ge – Does not contain costly silver or bismuth. Exact Melting Point of 227°C (True Eutectic) Bridge-free and icicle-free soldering. Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate. High Fluidity (Less Rework) Low drossing alloy. – Dross rate equal or lower than tin-lead solder Reliable joints (no reported failures in 7 years of field service). Low copper pad erosion. – Does not erode copper from holes, pads and tracks Low rate of copper leaching makes it easy to controlthe copper content of the solder bath Does not require a nitrogen atmosphere. Low aggressiveness to soldering equipment. – Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys Good through-hole penetration Good topside fillet formation Thermal fatigue resistance and creep strength betterthan tin-lead Slow, even growth of the intermetallic layer at the solder/substrate interface Also performs well in selective and dip soldering Over 800 tons consumed each month worldwide. SPECIFICATIONS: Material Property SN100C Test method Melting Temperature [°C] Solidus   227 Ramp ratefor different thermal analysis   20°/min Liquidus  227 S.G. 7.4 S.G. measuring apparatus 25° Specific Heat 220 Estimated value Thermal conductivity 64 Estimated value Vickers Hardness Slow cooling 16.1 Cast onto aluminum plate Fast cooling 12.9 Cast onto insulating brick Tensile strength 32 10mm/min. (25°) Elongation [%] 48 10mm/min. (25°) Electrical resistance 0.13 For Terminal method (25°)   Material Property SN100C Test method Coefficient  of                

    $89.00
    + Shipping
    Go to shop

    40W CO2 Laser Tube 700mm For Cutting Engraving Cutting Machine-Laser Equipment

    Description: 40W CO2 Laser Tube 700mm is mainly used for laser engraving machine, laser marking machine and laser cutting machine. Specifications: Material:Hard glass Length:700mm Diameter:50mm Application: CO2 laser tube is mainly used for laser engraving machine, laser marking machine, laser cutting machine. It is the core component light,and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc. Features: This is mainly made of hard glass, the cavity, the electrode composed of three parts. 1.Hard glass part; the part formed by firing into the discharge tube GG17 material, water-cooled jacket, storage units and back to the trachea and components. Sealed-off CO2 laser is typically three pipe structure. Innermost discharge tube, the middle is the net water jacket, the outermost layer is the gas storage units, return pipe is used for communicating and gas discharge tubes. 2.Cavity parts: the part formed by totally reflecting mirror and output mirrors. Full-mirror cavity generally with optical glass substrate, the surface crossing the gold film, gold film mirror reflection over 10.6um near 98%; output mirror resonator generally use infrared radiation transmissive material 10.6um germanium (Ge) as a base, crossing above the dielectric multilayer film made. 3.Electrode portion: CO2 lasers generally use cold cathode is cylindrical in shape, the choice of the cathode material has a great influence on the life of the laser, the basic requirements for cathode materials are: sputtering rate, small gas absorption rate, commonly used metals material nickel How to use it: 1.Line first electrode connected, (+ -) Do not pick the wrong pole. 2.Cooling water pipe connected, the water connection from the anode, cathode and down into the water on the principle meet, and the interface is not leaking. Must store enough water in the water before use, must weather bubble through water in the water-cooled pipe before use (before use each time you have to look). 3.Automatic detection devices are recommended to join in the net but the laser tube water system to prevent the laser tube without water while at work due to overheating fault Troubleshooting: First, the moment is not deep: 1.Cut is not deep: check the supporting point of the laser tube is reasonable, whether the light intensity is set too small, the optical path is offset, the focal length is correct, whether ytterbium sheet surface scratches and dirt, if the flow of cooling water flow pressure normal no more than a few problems on check light outlet lens inside the laser tube for scratches and dirt, if you are normal, then it is the laser tube itself, the quality problem. 2.Emitting a while before the moment is not deep: this problem is to test the support point of the laser tube is reasonable, the water temperature exceeds 30 degrees, the lens is heat at work, whether the flow of cooling water flow pressure is normal, if the cooling water clean, above normal then check the laser tube Second, the high voltage ignition and discharge: 1.Check around the high pressure head there and moist dirt away from the metal part of the machine is too close; the other is the laser power high-voltage connector device is falling from the seat, and whether an internal high-voltage connector device disconnection and destruction. If above normal, then so is the quality of the laser tube itself is a problem. Third, the laser tube broken, cracked, water head off: 1.Water temperature is controlled in the range of 25 -30 the cooling water can not ice cold regions, especially after laser shutdown, may not allow the cooling water retention in the laser tube. 2.Whether luminous work under the control of the water protection; (test will not be as luminous water off and emit light or not) 3.There are no water pipes will fight the demolition of the phenomenon. 4.Whether there will be bubbles within the laser tube. 5.Water pressure is normal; if the direction of flow low prices. Package include: 1

    $163.07
    + Shipping: $2.39
    Go to shop

    50W 800mm CO2 Laser Tube Metal Head For Cutting Engraving Machine -Laser Equipment

    Description: CO2 Laser Tube is mainly used for laser engraving machine, laser marking machine and laser cutting machine. Specifications: Material:Hard glass+metal head Length:800mm Diameter:50mm Power:50W Application: CO2 laser tube is mainly used for laser engraving machine, laser marking machine,laser engraving machine, laser cutting machine, is the core component light,and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc. Features: This is mainly made of hard glass, the cavity, the electrode composed of three parts. 1. Hard glass part; the part formed by firing into the discharge tube GG17 material, water-cooled jacket, storage units and back to the trachea and components. Sealed-off CO2 laser is typically three pipe structure. Innermost discharge tube, the middle is the net water jacket, the outermost layer is the gas storage units, return pipe is used for communicating and gas discharge tubes. 2. Cavity parts: the part formed by totally reflecting mirror and output mirrors. Full-mirror cavity generally with optical glass substrate, the surface crossing the gold film, gold film mirror reflection over 10.6um near 98%; output mirror resonator generally use infrared radiation transmissive material 10.6um germanium (Ge) as a base, crossing above the dielectric multilayer film made. 3. Electrode portion: CO2 lasers generally use cold cathode is cylindrical in shape, the choice of the cathode material has a great influence on the life of the laser, the basic requirements for cathode materials are: sputtering rate, small gas absorption rate, commonly used metals material nickel How to use it: 1. Line first electrode connected, (+ -) Do not pick the wrong pole. 2. Cooling water pipe connected, the water connection from the anode, cathode and down into the water on the principle meet, and the interface is not leaking. Must store enough water in the water before use, must weather bubble through water in the water-cooled pipe before use (before use each time you have to look). 3. Automatic detection devices are recommended to join in the net but the laser tube water system to prevent the laser tube without water while at work due to overheating fault Troubleshooting: First, the moment is not deep: 1. Cut is not deep: check the supporting point of the laser tube is reasonable, whether the light intensity is set too small, the optical path is offset, the focal length is correct, whether ytterbium sheet surface scratches and dirt, if the flow of cooling water flow pressure normal no more than a few problems on check light outlet lens inside the laser tube for scratches and dirt, if you are normal, then it is the laser tube itself, the quality problem. 2. Emitting a while before the moment is not deep: this problem is to test the support point of the laser tube is reasonable, the water temperature exceeds 30 degrees, the lens is heat at work, whether the flow of cooling water flow pressure is normal, if the cooling water clean, above normal then check the laser tube Second, the high voltage ignition and discharge: 1. Check around the high pressure head there and moist dirt away from the metal part of the machine is too close; the other is the laser power high-voltage connector device is falling from the seat, and whether an internal high-voltage connector device disconnection and destruction. If above normal, then so is the quality of the laser tube itself is a problem. Third, the laser tube broken, cracked, water head off: 1. Water temperature is controlled in the range of 25 -30 the cooling water can not ice cold regions, especially after laser shutdown, may not allow the cooling water retention in the laser tube. 2. Whether luminous work under the control of the water protection; (test will not be as luminous water off and emit light or not) 3. There are no water pipes will fight the demolition of the phenomenon. 4. Whether there will be bubbles within the laser tube. 5. Water pressure is normal; if the di

    $217.43
    + Shipping: $1.82
    Go to shop

What to consider when shopping for vitamins and nutrition products

Our daily diet doesn’t necessarily cater to our body’s needs, making it important for us to go the extra mile and supplement our food intake with vitamins and nutrients. Vitamins are organic compounds that can be produced by our bodies, but just not quickly enough to maintain normal physiological functions. Minerals, needed in small quantities, vary in each food item. So if you need to the extra nourishment, be sure to invest in a multivitamin appropriate for you.

Back to top

Recently Viewed Vitamins and Nutrition


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.