masthead amplifier - The Best masthead amplifier Prices In Australia | GetPrice
You searched

masthead amplifier

Showing 1 - 11 of 11 results
Sort:
  1. {tab Features} MHU35F 35DB UHF MASTHEAD AMPLIFIER WITH LTE/4G FILTERINGKINGRAY Protecting your television from LTE mobile broadband interference Australia and New Zealand are about to embark on a communications revolution, which will include possibly the biggest changes to the reception of television services ever.With the switch off of analogue television transmissions completed by late 2013, a substantial part of the existing television spectrum will be reallocated and auctioned off by the government, generating what is now universally referred to as the “digital dividend”. To facilitate this, some existing digital channels will need to be reallocated or moved to a differentpart of the spectrum, this is commonly known as restacking. Once this has occurred, the freed up spectrum from the “digital dividend” will be reassigned for other digital services. The most likely use for this spectrum is for high speed mobile broadband applications using 4G or LTE technology. Using this “digital dividend” for emerging technology is going to provide substantial benefits for the general public. However it willnot be without its challenges for the television reception industry, it is most likely many television installations will experience significant interference to their digital television reception. Features: The NEW Kingray Edge series of masthead amplifiers hasbeen engineered to provide a future proof solution with switchable LTE/4G filtering to maximise interference rejection. The Edge series features links allowing the amplifier to be configured to best suit the installation now and in the future. The range includes both wideband and UHF only models used to amplify the whole UHF band or alternatively by re-positioning the links, all services above 694 MHz are filtered, blocking future LTE transmissions. In addition to LTE filtering some wideband models in the Edge series include user selectable low band filtering to eliminate all services below 174 MHz. The Edge series is

    $54.00
    + Shipping
  2. {tab Overview} MHU25FS 25DB UHF SHIELDED MASTHEAD AMPLIFIER – KINGRAY Are you protected from LTE The MHU25FS is a UHF masthead amplifier with the capability to diplex VHF, either from combined or separate VHF and UHF antennas; it has F connections, is shielded and is part of the Kingray Edge Series range. The Kingray Edge series has been engineered to provide a future proof solution with LTE/4G filtering to maximise interference rejection. The range includes both wideband and UHF only models, all services above 694 MHz are filtered, rejecting LTE transmissions. In addition to LTE filtering most wideband models in the Edge series include low band filtering to eliminate all services below 174 MHz The Edge series is designed to meet the needs of the television reception industry now and well into the future. {tab Features} UHF amplifier with VHF diplexing Separate or combined inputs LTE filtering UHF gain control Fully sheilded housing F type connections 100% weatherproof case {tab Specifications} ELECTRICAL SPECIFICATION Frequency Range VHF: 174 – 230 MHz, UHF: 520 – 820 MHz Maximum Gain VHF -2, UHF 35 dB Gain Control Range 10 dB Maximum Output Level 108dBuV - 60 dB IMR (DIN45004B) Noise Figure UHF: <2.5 dB LTE Filter -25dB 750MHz MECHANICAL SPECIFICATION Input Connector F type Output Connector F type POWER SUPPLY Suitable plug pack PSK06/08, PSK06/08F, KPS06/08, KPS06/08F Power Consumption 70 mA IN THE BOX: MHU25FS Cable Tie Installation Manual {/tabs}

    $55.00
    + Shipping
  3. UHF/VHF LT3275 Digital TV Masthead Amplifier

    $72.98
    + Shipping
  4. Replacement Power Supplies for Masthead Amplifiers

    $35.98
    + Shipping
  5. {tab Features} MHU35F 35DB UHF MASTHEAD AMPLIFIER WITH LTE/4G FILTERINGKINGRAY Protecting your television from LTE mobile broadband interference Australia and New Zealand are about to embark on a communications revolution, which will include possibly the biggest changes to the reception of television services ever.With the switch off of analogue television transmissions completed by late 2013, a substantial part of the existing television spectrum will be reallocated and auctioned off by the government, generating what is now universally referred to as the “digital dividend”. To facilitate this, some existing digital channels will need to be reallocated or moved to a differentpart of the spectrum, this is commonly known as restacking. Once this has occurred, the freed up spectrum from the “digital dividend” will be reassigned for other digital services. The most likely use for this spectrum is for high speed mobile broadband applications using 4G or LTE technology. Using this “digital dividend” for emerging technology is going to provide substantial benefits for the general public. However it willnot be without its challenges for the television reception industry, it is most likely many television installations will experience significant interference to their digital television reception. Features: The NEW Kingray Edge series of masthead amplifiers hasbeen engineered to provide a future proof solution with switchable LTE/4G filtering to maximise interference rejection. The Edge series features links allowing the amplifier to be configured to best suit the installation now and in the future. The range includes both wideband and UHF only models used to amplify the whole UHF band or alternatively by re-positioning the links, all services above 694 MHz are filtered, blocking future LTE transmissions. In addition to LTE filtering some wideband models in the Edge series include user selectable low band filtering to eliminate all services below 174 MHz. The Edge series is

    $54.00
    + Shipping
  6. {tab Overview} MHU25FS 25DB UHF SHIELDED MASTHEAD AMPLIFIER – KINGRAY Are you protected from LTE The MHU25FS is a UHF masthead amplifier with the capability to diplex VHF, either from combined or separate VHF and UHF antennas; it has F connections, is shielded and is part of the Kingray Edge Series range. The Kingray Edge series has been engineered to provide a future proof solution with LTE/4G filtering to maximise interference rejection. The range includes both wideband and UHF only models, all services above 694 MHz are filtered, rejecting LTE transmissions. In addition to LTE filtering most wideband models in the Edge series include low band filtering to eliminate all services below 174 MHz The Edge series is designed to meet the needs of the television reception industry now and well into the future. {tab Features} UHF amplifier with VHF diplexing Separate or combined inputs LTE filtering UHF gain control Fully sheilded housing F type connections 100% weatherproof case {tab Specifications} ELECTRICAL SPECIFICATION Frequency Range VHF: 174 – 230 MHz, UHF: 520 – 820 MHz Maximum Gain VHF -2, UHF 35 dB Gain Control Range 10 dB Maximum Output Level 108dBuV - 60 dB IMR (DIN45004B) Noise Figure UHF: <2.5 dB LTE Filter -25dB 750MHz MECHANICAL SPECIFICATION Input Connector F type Output Connector F type POWER SUPPLY Suitable plug pack PSK06/08, PSK06/08F, KPS06/08, KPS06/08F Power Consumption 70 mA IN THE BOX: MHU25FS Cable Tie Installation Manual {/tabs}

    $55.00
    + Shipping
  7. Replacement Power Supplies for Masthead Amplifiers

    $35.98
    + Shipping
  8. {tab Overview} MDA15W 15DB WIDEBAND (UHF/VHF) LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 174-694 Gain 15db Gain control VHF 10BD UHF 6db Noise Figure 10db Supply Voltage 12-14V DC Only Filters 174mhz HP, 694Mhz LP Inputs 1 {/tabs}

    $66.00
    FREE shipping
  9. {tab Overview} MDA15U 15DB UHF LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 470-694 Gain 15db Gain control 6db Noise Figure 10db Supply Voltage 12-14V DC Only Filters 470mhz HP, 694Mhz LP Inputs 1 {/tabs}

    $66.00
    FREE shipping
  10. {tab Overview} MHU25F 25DB UHF MASTHEAD ‘F’ TYPE WITH LTE/4G FILTERING – KINGRAY Are you protected from LTE The MHU25F is a UHF masthead amplifier with the capabilityto diplex VHF, either from combined or separate VHF and UHF antennas; it has F connections and is part of the Kingray Edge Series range. The Kingray Edge series has been engineered to provide a future proof solution with LTE/4G filtering to maximise interference rejection. The range includes both wideband and UHF only models, all services above 694 MHz are filtered, rejecting LTE transmissions. In addition to LTE filtering most wideband models in the Edge series include low band filtering to eliminate all services below 174 MHz The Edge series is designed to meet the needs of the television reception industry now and well into the future. {tab Features} UHF amplifier with VHF diplexing. Separate or combined inputs. LTE filtering Gain control F type connections 100% weatherproof case. {tab Specifications} Frequency Range: VHF: 174 – 230 MHz, UHF: 520 – 694 MHz Maximum Gain VHF: -2 dB UHF: 25 dB Gain Control Range: UHF: 10 dB Maximum Output Level: 108 dBuV - 60 dB IMR (DIN45004B) LTE Filter: -25dB 750MHz Input Connector F type Output Connector F type {tab FAQs} My masthead isn’t working all the sudden! Why? In 2015, we are switching on 4G LTE signals, so we need to filter out the signal. We would say please read the Kingray instructions, but who are we kidding! We don’t read instructions either! So here’ssome pictures: Click on images for larger version Fig1. Above the F type socket on the left, you have 2 jumper plugs running horizontally. Fig2. Remove them by hand. Fig3. And plug them in to the right, under D. Fig4. The top one is done. Fig5. And now the bottom one is done. The problem is fixed… We hope! {tab In the Box} MHU25F Cable Tie Installation Manual {/tabs}

    $44.00
    + Shipping
  11. {tab Overview} MDA15V 15DB VHF LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 174 – 230mhz Gain 15db Gain control 10db Noise Figure 10db Supply Voltage 12-14V DC Only Filters 174mhz HP, 230Mhz LP Inputs 1 {/tabs}

    $66.00
    FREE shipping
More results from our partners
  1. {tab Features} MHU35F 35DB UHF MASTHEAD AMPLIFIER WITH LTE/4G FILTERINGKINGRAY Protecting your television from LTE mobile broadband interference Australia and New Zealand are about to embark on a communications revolution, which will include possibly the biggest changes to the reception of television services ever.With the switch off of analogue television transmissions completed by late 2013, a substantial part of the existing television spectrum will be reallocated and auctioned off by the government, generating what is now universally referred to as the “digital dividend”. To facilitate this, some existing digital channels will need to be reallocated or moved to a differentpart of the spectrum, this is commonly known as restacking. Once this has occurred, the freed up spectrum from the “digital dividend” will be reassigned for other digital services. The most likely use for this spectrum is for high speed mobile broadband applications using 4G or LTE technology. Using this “digital dividend” for emerging technology is going to provide substantial benefits for the general public. However it willnot be without its challenges for the television reception industry, it is most likely many television installations will experience significant interference to their digital television reception. Features: The NEW Kingray Edge series of masthead amplifiers hasbeen engineered to provide a future proof solution with switchable LTE/4G filtering to maximise interference rejection. The Edge series features links allowing the amplifier to be configured to best suit the installation now and in the future. The range includes both wideband and UHF only models used to amplify the whole UHF band or alternatively by re-positioning the links, all services above 694 MHz are filtered, blocking future LTE transmissions. In addition to LTE filtering some wideband models in the Edge series include user selectable low band filtering to eliminate all services below 174 MHz. The Edge series is designed to meet the needs of the television reception industry now and into the future. Specs:   .rpg_table { border-collapse:collapse } .rpg_table th, .rpg_table td { padding:5px;text-align:left;vertical-align:top; border: solid 1px #cccccc; } .rpg_table th { font-weight:bold; } Model Inputs Termination Shielded Band Max. Gain Gain controls Pager filter FM filter Band 1 VHF filter LTE filter MHW25GE 1 S&S   VHF/UHF 25 1   •   • MHW25F 2 F   VHF/UHF 25 2 • • • • MHW25FS 2 F • VHF/UHF 25 2 • • • • MHW25FE 1 F   VHF/UHF 25 1 • •   • MHW25FSE 1 F • VHF/UHF 25 1 • •   • MHW35G 2 S&S   VHF/UHF 35 2 • • • • MHW35F 2 F   VHF/UHF 35 2 • • • • MHW35FS 2 F • VHF/UHF 35 2 • • • • MHW43FS 2 F • VHF/UHF 43 2 • • • • MHU25GE 2 S&S   UHF 25 1       • MHU25F 2 F   UHF 25 1       • MHU25FS 2 F • UHF 25 1       • MHU35G 2 S&S   UHF 35 1       • MHU35F 2 F   UHF 35 1       • MHU35FS 2 F • UHF 35 1       • MHU43FS 2 F • UHF 43 1       • {tab FAQs} My masthead isn’t working all the sudden! Why?

    $54.00
    + Shipping
  2. {tab Overview} MHU25FS 25DB UHF SHIELDED MASTHEAD AMPLIFIER – KINGRAY Are you protected from LTE The MHU25FS is a UHF masthead amplifier with the capability to diplex VHF, either from combined or separate VHF and UHF antennas; it has F connections, is shielded and is part of the Kingray Edge Series range. The Kingray Edge series has been engineered to provide a future proof solution with LTE/4G filtering to maximise interference rejection. The range includes both wideband and UHF only models, all services above 694 MHz are filtered, rejecting LTE transmissions. In addition to LTE filtering most wideband models in the Edge series include low band filtering to eliminate all services below 174 MHz The Edge series is designed to meet the needs of the television reception industry now and well into the future.   {tab Features} UHF amplifier with VHF diplexing Separate or combined inputs LTE filtering UHF gain control Fully sheilded housing F type connections 100% weatherproof case {tab Specifications} ELECTRICAL SPECIFICATION Frequency Range VHF: 174 – 230 MHz, UHF: 520 – 820 MHz Maximum Gain VHF -2, UHF 35 dB Gain Control Range 10 dB Maximum Output Level 108dBuV - 60 dB IMR (DIN45004B) Noise Figure UHF: <2.5 dB LTE Filter -25dB 750MHz MECHANICAL SPECIFICATION Input Connector F type Output Connector F type POWER SUPPLY Suitable plug pack PSK06/08, PSK06/08F, KPS06/08, KPS06/08F Power Consumption 70 mA IN THE BOX: MHU25FS Cable Tie Installation Manual {/tabs}

    $55.00
    + Shipping
  3. {tab Overview} MHU25F 25DB UHF MASTHEAD ‘F’ TYPE WITH LTE/4G FILTERING – KINGRAY Are you protected from LTE The MHU25F is a UHF masthead amplifier with the capabilityto diplex VHF, either from combined or separate VHF and UHF antennas; it has F connections and is part of the Kingray Edge Series range. The Kingray Edge series has been engineered to provide a future proof solution with LTE/4G filtering to maximise interference rejection. The range includes both wideband and UHF only models, all services above 694 MHz are filtered, rejecting LTE transmissions. In addition to LTE filtering most wideband models in the Edge series include low band filtering to eliminate all services below 174 MHz The Edge series is designed to meet the needs of the television reception industry now and well into the future. {tab Features} UHF amplifier with VHF diplexing. Separate or combined inputs. LTE filtering Gain control F type connections 100% weatherproof case. {tab Specifications} Frequency Range: VHF: 174 – 230 MHz, UHF: 520 – 694 MHz Maximum Gain VHF: -2 dB UHF: 25 dB Gain Control Range: UHF: 10 dB Maximum Output Level: 108 dBuV - 60 dB IMR (DIN45004B) LTE Filter: -25dB 750MHz Input Connector F type Output Connector F type {tab FAQs} My masthead isn’t working all the sudden! Why? In 2015, we are switching on 4G LTE signals, so we need to filter out the signal. We would say please read the Kingray instructions, but who are we kidding! We don’t read instructions either! So here’ssome pictures: Click on images for larger version Fig1. Above the F type socket on the left, you have 2 jumper plugs running horizontally. Fig2. Remove them by hand. Fig3. And plug them in to the right, under D. Fig4. The top one is done. Fig5. And now the bottom one is done. The problem is fixed… We hope!  {tab In the Box} MHU25F Cable Tie Installation Manual {/tabs}

    $44.00
    + Shipping
  4. {tab Overview} MDA15U 15DB UHF LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 470-694 Gain 15db Gain control 6db Noise Figure <2.5db Output Figure 113db @ -60dbimr Din 45004 B Return Loss >10db Supply Voltage 12-14V DC Only Filters 470mhz HP, 694Mhz LP Inputs 1 {/tabs}

    $66.00
    + Shipping
  5. {tab Overview} MDA15W 15DB WIDEBAND (UHF/VHF) LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 174-694 Gain 15db Gain control VHF 10BD UHF 6db Noise Figure <2.5db Output Figure 113db @ -60dbimr Din 45004 B Return Loss >10db Supply Voltage 12-14V DC Only Filters 174mhz HP, 694Mhz LP Inputs 1 {/tabs}

    $66.00
    + Shipping
  6. {tab Overview} MDA15V 15DB VHF LOW NOISE MASTHEAD AMPLIFIER – KINGRAY Kingray Introduces the MDA15 Low Noise Masthead Distribution Amplifier Range Kingray are proud to announce the release of the MDA15 range of low noise masthead amplifiers. The characteristics of the IC selected provide a very low noise figure and an output figure comparable to many distribution amplifiers, hence the name Masthead Distribution Amplifier (MDA). The MDA15 range consists of three models; MDA15V, MDA15U (UHF only), and MDA15W (Wideband). The range is designed to be powered by a DC power supply, ACpower supplies are not suitable. Whether the amplifier is used as a Masthead or Distribution Amplifier, the low noise figure, capacity for multiple channels with low distortion and a high output provides a solution for all installations and is proven especially effective in problem reception areas. {tab Specifications} Frequency 174 – 230mhz Gain 15db Gain control 10db Noise Figure <2.5db Output Figure 113db @ -60dbimr Din 45004 B Return Loss >10db Supply Voltage 12-14V DC Only Filters 174mhz HP, 230Mhz LP Inputs 1 {/tabs}

    $66.00
    + Shipping
  7. Features: -4 Channel independent input and output.-Field-effect high-performance switch power supply circuit.-Adopting gold plated lotus plug input terminal, low level input.-Stereo / bridged output transition.-With power supply indicator.-DC12V power supply.-Aluminum heat-sink which enables stableness.-With perfect thermal overheat, overload, short circuit protection function.-Turn-on postpone  anti-point circuit.-High-power tube.-Super sub-woofer output boost selection control switch.-With protection indicator.-Car amplifier (4 Ch) x1.-Tools x1.-Operations manual x1.-Distressed: No.Specifications: -H.p.f/l.p.f/gain control-adjust circuit.-Full/l.p.f/h.p.f output transition control switch.-With external fuse (20A X 2).-Power turn-on postpone circuit.-Bridged output power (max): 5600 W (2800 W x 2).-Output power (max): 5600 W (1400 W x 4).-Output power (RMS): 560 W (140 W x 4).-Frequency response: 10hz - 20khz± 1db 45 DB.-Stereo output: 2 - 16.-Bridge output: 4 - 16.-Power supply: 12 V.Dimensions: -Overall Product Weight: 2.66.

    $95.00
    + Shipping
  8. Car Sub Woofer Amplifier Speakers W/ Inbuilt Amp Cables

    $103.90
    + Shipping
  9. Features: -Low level output.-Input ground isolation noise rejection circuit.-4-Channel RCA input/output.-Bass/Treble/Gain Controls.-Speaker short circuit protection.-Overload circuit protection.-Turn on delay.-Automotive style protection fuses.-Over current /overtension protection circuit.-With external fuse (10A).-Field-effect high-performance switch power supply circuit.-Power turn-on postpone circuit.-With power supply indicator.-DC12V power supply.-Car amplifier (4 Ch) X1.-Tools X1.-Operations manual X1.-Distressed: No.Specifications: -Power supply: 12V.-Bridge output: 4 - 8.-Bridged output power (MAX): 2800W (1400W x 2).-Output power (Max): 2800W (700W x 4).-Output power (RMS): 280W (70W x 4).-Frequency response: 20Hz - 20KHz ± 1.5dB.-Treble con: ± 10dB 10KHz.-Bass con: ± 10dB 100Hz.-Input sensitivity: Dimensions: -Overall Product Weight: 1.85.

    $59.00
    + Shipping
Back to top

Recently Viewed Amplifiers & Receivers


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.