ph meter - Compare The Best ph meter Prices In Australia | GetPrice
You searched

ph meter

Showing 1 - 20 of 70 results
Sort:
  1. • Double junction electrode with 1 meter cable • Manual calibration • Faster Processor with The New Chipset and Motherboard • 100% Larger ; Easier To Read LED Display • Smaller, Ergonomic ; Lighter Case Design • Easier ; Faster To Calibrate • Longer Battery LifeKit Includes:1 x IC-MW-101 pH/Temp Meter1 x MA911B/1 Double Junction pH Electrode1 x 20ml pH 7 Buffer Solution1 x Calibration Screwdriver

    $257.40
    FREE shipping
  2. • Performs pH measurements with a 0.1pH resolution and with automatic temparature compensation• pH/Temperature meter with extended range (-2.00 to 16pH)• Double junction electrode with 1 meter cable • Automatic Calibration • Faster Processor with The New Chipset and Motherboard • 100% Larger ; Easier To Read LED Display • Smaller, Ergonomic ; Lighter Case Design • Easier ; Faster To Calibrate • Longer Battery Life Kit Includes:1 x IC-MW-102 pH/Temp Meter1 x MA911B/1 Double Junction pH Electrode1 x MA830R Temperature Probe1 x 20ml pH 7 Buffer Solution1 x 20ml pH 4 Buffer Solution

    $375.10
    FREE shipping
  3. Ph METER GENERAL PURPOSE Ph ELECTRODE OPTIONAL PH204

    $119.00
    FREE shipping
  4. LUTRON DIGITAL PH METER YK2001PH

    $249.00
    FREE shipping
  5. Hand Held pH Meter

    $72.98
    + Shipping
  6. Buffer QM1671 Solution to suit Hand Held pH Meter

    $10.98
    + Shipping
  7. This 3-in-1 Plant Flower Soil Moisture, PH and Light Meter is your ideal gardening tool. The moisture meter works with all soil types and is suitable for use both indoors or outdoors - simply place it in the soil, set, measure and read. Features 3 functions in one compact meter measuring PH, moisture and light Scientifically accurate No need for batteries Easy-to-read scale indicator Incredibly simple to use - just stick it in the soil! Works with house and garden plants

    $19.95
    + Shipping
  8. A simple and accurate device for checking pH levels in water. This digital pH meter can accurately measure and display the pH reading of a liquid or solution. It is equally valuable for keeping your fish tank at the proper pH level for optimum fish health or checking your swimming pool for the right balance. The PH meter is simple to use and the LCD gives clear and precise readings that are much more accurate than messy chemicals. Measuring pH Range: 0.0 - 14.0 pH. Resolution: 0.1 pH. Accuracy: 0.1 pH (20C), 0.2 pH. Operating Temperature: 0 - 50C (32-122F). Relative Humidity: <95%. Life: approx.700hours of use. Calibration: manual,1 point.(not included) Power: 3 x 1.5V(AG-13 button battery)(included). Size: 15.2cm x 2.8cm x 1.5cm. Package Included: Digital PH Meter Tester Screw driver PH buffer power Instruction manual Storage case

    $29.95
    + Shipping
  9. Taylor ULTRAPEN PT2 pH/Temp Myron L Meter This kit tests for pH (0-14) and Temperature (32-160F/0-71C) using an electronic meter. Components for Kit Number: 6556 Component Description Quantity 2320 LABEL 1 6479 ORAJET 3640 MATTE WHITE 0.06 6555A METER 1

    $211.99
    + Shipping
  10. Taylor TechPro II TPH1 pH/Conductivity/TDS/Temp Myron L Meter Kit This kit tests for Conductivity, Total Dissolved Solids (TDS), pH, and Temperature using an electronic meter. Temperature (32-160F/0-71C) Total Dissolved Solids (0-9999 ppm or 10-20.00 ppt) Conductivity (0-9999 S or 10-20.00 mS) pH (0-14) Components for Kit Number: K-6530 Component Description Quantity 5843 METER INSTRUCTIONS 1 6520 METER 1 7009 CASE 1 7265 CASE LABEL 1 7357 INSERT 1 8155 KIMPAC 1 R-0833-C =DI WATER, 2 OZ 1 R-0868-25C-C =CONDUCTIVITY SOL 2500, 2 OZ 1 R-1099-04-C BUFF SOL PH 4.0, 2 OZ 1 R-1099-07-C BUFF SOL PH 7.0, 2 OZ 1 R-1099-10-C BUFF SOL PH 10.0, 2 OZ 1

    $1,962.99
    + Shipping
  11. Taylor TechPro II TPH1 pH/Conductivity/TDS/Temp Myron L Meter Kit This kit tests for Conductivity, Total Dissolved Solids (TDS), pH, and Temperature using an electronic meter. Temperature (32-160F/0-71C) Total Dissolved Solids (0-9999 ppm or 10-20.00 ppt) Conductivity (0-9999 S or 10-20.00 mS) pH (0-14) Components for Kit Number: K-6530 Component Description Quantity 5843 METER INSTRUCTIONS 1 6520 METER 1 7009 CASE 1 7265 CASE LABEL 1 7357 INSERT 1 8155 KIMPAC 1 R-0833-C =DI WATER, 2 OZ 1 R-0868-25C-C =CONDUCTIVITY SOL 2500, 2 OZ 1 R-1099-04-C BUFF SOL PH 4.0, 2 OZ 1 R-1099-07-C BUFF SOL PH 7.0, 2 OZ 1 R-1099-10-C BUFF SOL PH 10.0, 2 OZ 1

    $1,962.99
    + Shipping
  12. Taylor TechPro II TH1 pH/Temperature Myron L Meter Kit This kit tests for pH (0-14) and temperature (32-160F/0-71C) using an electronic meter. Components for Kit Number: K-6510 Component Description Quantity 5842 INSTRUCTIONS 1 6510 METER, TECHPRO II 1 7009 CASE 1 7265 CASE LABEL 1 7357 INSERT 1 8155 KIMPAC 1 R-0834-C PH SOAKER SOL, 2OZ 1 R-1099-04-C BUFF SOL PH 4.0, 2 OZ 2 R-1099-07-C BUFF SOL PH 7.0, 2 OZ 2 R-1099-10-C BUFF SOL PH 10.0, 2 OZ 2

    $975.99
    + Shipping
  13. Applications include: Sushi rice testing, fresh water testing (rain, rivers, lakes, hot springs); aquaria; drainage treatment solutions; soil testing for improved agriculture; fermentation and brewing; food freshness testing; research laboratories; QC of medical supplies and cosmetics; preventative dentistry; school education, etc. Features: - Accurate pH measurements in a few seconds, from a single drop.* - Autocalibration function recognizes standards.- Temperature compensation- IP67 waterproof- Auto hold- Automatic power off: 30 minutes- 3 calibration points- Supplied with calibration solution (pH 4 ; pH 7) Specifications: MODEL PH 22 Measurement principle Glass electrode method Minimum sample volume 0.1mL or more *1 Measurement range 0 to 14pH Range and Resolution (Valid numbers) 0.01pH Calibration 3-point Accuracy +-0.01pH *4 Functions Temperature compensation,Waterproof, Auto hold,Automatic power off: 30 minutes Display Custom (monochrome) Digital LCD with back-light with on/off switch Operating temperature/humidity 5 to 40 C, 85% or less in relative humidity (no condensation) Power CR2032 batteries (x2) Battery life Approx. 400 hours in continuous use Main Material ABS epoxy Dimensions /Mass 164mm ? 29mm ? 20mm (excluding projections) / Approx. 50 g (meter only, without batteries) Accessories included 2 CR2032 batteries/1 Pipette/Instruction manual/Quick manual/Storage case Standard solution (pH4.01 ; pH7.00)(14mL)? 5 pieces of Sampling sheetB *1 0.05 mL or more if the sampling sheet B (sold separately) is used. *2 The closeness of agreement between measured value and actual value of the pH 4.01 standard solution after two point calibration using pH 4.01 and pH 7.00 standard solutions. The temperature during the calibration and measurement is the same. Two point calibration is started from pH 7.00. The error of standard solutions and rounding error (+-1 digit) are not included. *3 IP67: no failure when immersed in water at a depth of 1 meter for 30 minutes

    $198.00
    FREE shipping
  14. Features Waterproof IP67 Replaceable sensor Auto Stable or Auto Hold measurement Automatic temperature compensation Auto buffer recognition Auto power off (30 mins) 2x CR2032 Li battery: 400 hours life Packed in handy carrying case Supplied with required calibration solutions Material: ABS, Epoxy Display: Custom monochrome LCD Operating conditions: 5 to 40 C; 85% humidity Warranty: 2 years on meter; 6 months on sensor Included Accessories: 2 x CR2032 Batteries 1 x Pipette 1 x 14ml pH7 buffer solution 1 x 14ml pH4 buffer solution 1 x Small Plastic kit case MODEL pH 11 Measurement principle Glass electrode method Minimum sample volume 0.1mL or more *1 pH range 0to 14 pH Resolution (Valid digits) 0.1 pH Calibration Up to two-point USA: 1.68, 4.01, 7.00, 10.01 ; 12.46 NIST: 1.68, 4.01, 6.86, 9.18 ; 12.46 Accuracy *2 +- 0.1 pH Temperature Display - Display Custom (monochrome) digital LCD with back-light Operating temperature/humidity 5 to 40 C, 85% or less in relative humidity (no condensation) Power CR2032 batteries (x2) Battery life Approx. 400 hours in continuous use Outer dimensions /Mass 164mm ? 29mm ? 20mm (excluding projections)/ Approx. 50 g (meter only, without batteries) Main functions Temperature compensations, waterproof *3, auto stable/auto hold, automatic power OFF *1 0.05 mL or more if the sampling sheet B (sold separately) is used. *2 The closeness of agreement between measured value and actual value of the pH 4.01 standard solution after two point calibration using pH 4.01 and pH 7.00 standard solutions. The temperature during the calibration and measurement is the same. Two point calibration is started from pH 7.00. The error of standard solutions and rounding error (+-1 digit) are not included. *3 IP67: no failure when immersed in water at a depth of 1 meter for 30 minutes Please note that the meter cannot be used underwater.

    $154.00
    FREE shipping
  15. Features: Starter 5000's performance is propelled by a 1000 item library, 10 sensors for calibration storage, 8 predefined and 1 self-defined buffer groups, 3 endpoint modes and GLP mode. The color touchscreen operates similar to smartphones and tablet computers and provides simple operation of the advanced features, such as one-touch toggling of measurement modes. With a standalone electrode holder, USB port, IP54 housing and in-use-cover, Starter 5000 provides the flexibility and protection that ensures smooth and enduring operation. Specifications: Application: pH and oxidation-reduction potential (ORP) measurement Modes: 3 endpoint modes and continuous measurement. Calibration: up 9 points Memory: Can store 1000 measurement readings Display: Backlit liquid crystal display (LCD), touchscreen Operation: AC adapter (included) Communication: RS232 and USB (included). GLP/GMP data output with real-time clock. Construction: ABS housing, standalone electrode holder, replaceable in-use cover ST5000-F is supplied with: ST5000-B meter, in-use cover, stand-alone electrode holder, 4GB flash drive, buffer powder set (4.01,7.01,10.01), power adapter, manufacturer quality certificate and manual and ST350 electrode

    $1,804.00
    FREE shipping
  16. pH meter.* Pen style meter with integral pH electrode * pH electrode is easily replaced * Temperature measurement in °C and °F * Automatic temperature compensation * Automatic pH calibration at 4, 7 or 10 pH * IP-67 rated water resistant housing * Battery operated

    $156.20
    FREE shipping
  17. Features: - With a meter stand, wrist strap for secure field use and IP54 housing, Starter 300 is durable and prepared for versatile use. - Automatic and manual temperature compensation ensures accurate readings while a 30 measurement library stores data for future reference. - The auto buffer recognition stores calibration data and helps to avoid errors during the calibration process. Specifications: - Application: pH and oxidation-reduction potential (ORP) measurement - Memory: Can store 30 measurement readings - Temperature compensation: Manual and automatic modes with auto buffer recognition - Calibration: 3-point calibration - Display: Liquid crystal display (LCD) - Operation: AC adapter (included) - Communication: RS232 - Construction: ABS housing, wrist strap

    $660.00
    FREE shipping
  18. The StarterPen ST20 meter provides what should be expected of a small,economical pen meter: simple, fast, straightforward, no-frills operation time and time again. The ST20offer a convenient way to measure pH, or the relative acidity or alkalinity of a sample at a given temperature. This meter can be completely operated with just one hand, freeing up your other hand to handle samples.Specifications:• Range: 0.0-14.0• Resolution: 0.01pH • Accuracy: 0.05pH• Temperature Range: 0.0-99.0 °C• Temperature Compensation: Yes• Display: Dual• Calibration: 3 point• Buffer group: 4.01, 7.00, 10.01• Automatic shutdown: 6 minutes of non-use

    $176.00
    FREE shipping
  19. The new Myron L Ultrapen™ PT2 is designed to be extremely accurate, fast and simple to use in diverse water quality applications. A true, one-handed instrument, the PT2 is easy to calibrate and easy to use. To take a measurement, you simply press a button then dip the pen in solution. Results display in seconds.Features:• Accuracy of ±1% of READING ±.2% at calibration point• Reliable Repeatable Results• Automatic temperature compensation• Autoranging• Accuracy of benchtop lab equipment in an affordable, portable, compact pen• Rugged, reliable, shock-resistant fully encapsulated electronics, body constructed of aircraft aluminum• Simple one button function• Specially designed with measurement ranges and solution modes to meet the water quality testing needs of many applications• High capacity N-type battery included• WaterproofSpecifications:• Range (pH): 0.00-14.00 pH• Range (Temp): 0 - 71° C / 32 - 160° F• Accuracy (pH): ± 0.01 pH (After Wet Calibration)• Accuracy (Temp): ± 0.1 ºC / ± 0.1 ºF• Repeatability (pH): ± 0.01• Repeatability (Temp): ± 0.1 ºC / ± 0.1 ºF• Resolution (pH): 0.01 pH• Resolution (Temp): 0.1 ºC / 0.1 ºF• Time to Reading Stabilization: 10-30 seconds • Power Consumption: Active Mode 37 mA, Sleep Mode 2 µA • Temperature Compensation: Automatic to 25ºC • Physical Dimensions: 17.15 cm L x 1.59 cm D or 6.75 in. L x .625 in. D • Case Material: Anodized Aircraft Aluminum with Protective Coating • Battery Type: N type, Alkaline, 1.5V • Calibration Solutions: pH 4, pH 7, pH 10 • Operating/Storage Temperature: 0 - 55ºC or 32 - 131ºF • Enclosure Ratings: IP67 and NEMA 6 • EN61236-1: 2006 – Annex A: 2008: Electrostatic discharge to case of instrument may cause PT2 to spontaneously power on. If thi

    $289.30
    FREE shipping
  20. Features:pH• Multi-Parameter Water Quality Meters meter is equipped with a large backlit LCD display.• 1 to 5 points push-button calibration with auto-buffer recognition.• Selectable pH buffer standard (USA/NIST/DIN) or using the custom calibration solutions.• Automatic electrode slope display helps user decide whether to replace sensor.ORP Mode:• Single point offset calibration allows adjusting the displayed value to a known standard.• Relative and absolute millivolt measurement modes provide accurate ORP readings.Other Features:• Stability indicator automatically shows current measurement status.• Auto-Hold function freezes stable measured value for easy viewing and recording.• Manual temperature calibration improves the measurement accuracy of meter.• Selectable temperature unit (°C or °F) meets different application requirements.• Automatic electrode diagnosis shows zero point offset and slope of the pH electrode.• Help message as a operational guide that helps you quickly begin using the meter.• System menu allows setting the 9 parameters, including the pH buffer standard, number ofcalibration points, resolution, stability condition, temperature unit, etc.• Reset feature automatically resumes all parameters back to factory default options.• Expanded memory stores and recalls up to 500 readings.• Built-in real-time clock stamps stored data to meet GLP standard.• Stored data can be transferred into computer by USB communication interface.• Multi-mode power scheme (battery, power adapter, computer's USB port) ensures that usethe meter smoothly.SpecificationspH:• Range: -2.000~20.000pH• Accuracy: ±0.002pH• Resolution: 0.1, 0.01, 0.001pH• Calibration Points: 1 to 5 points• Calibration Solutions: USA, NIST, DIN or User-defined• Temperature Compensation: 0~100°C, 32~212°F• Compensation Mode: Manual or AutomaticmV:• Ra

    $625.90
    FREE shipping
Back to top

Recently Viewed Measuring & Other


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.