redarc srpa0360 solar regulator - The Best redarc srpa0360 solar regulator Prices In Australia | GetPrice
You searched

redarc srpa0360 solar regulator

Showing 1 - 20 of 37 results
Sort:
  1. REDARC’s 12V 40A In-vehicle battery charger features technology designed to fully charge your batteries, regardless of their type or size. By providing a unique charging profile to each specific battery type, the REDARC In-Vehicle Battery Charger is able to achieve and maintain an optimal charge in your secondary battery. The In-Vehicle Battery Charger also features a Maximum Power Point Tracking (MPPT) solar regulator, allowing you to deliver the maximum amount of power from your solar panels to your auxiliary battery. Features Multi Stage DC-DC Battery Charger MPPT Solar Regulator Start Battery Isolator Fully sealed Super quiet operation Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries Low Voltage Version (Not Suitable For 24V Vehicle Systems Specifications Input 9 - 32V DC Output Current 40A nominal Output Power 600W No Load Current <100mA Standby Current <8mA Min. O/P Battery Volts 4.2V Weight 680g Dimensions 150x120x37mm Standards CE, C-Tick, AS/NZS CISPR11:2004

    46%
    Off
    $415.00
    + Shipping: $9.00
  2. The REDARC BCDC1225 is a 12 Volt 25 Amp In-vehicle DC to DC charger designed to keep your auxiliary battery charged whilst driving or with portable solar panels when you’re parked. The system charges your auxiliary battery to their optimum levels, using multi-stage DC DC charging. Built to provide a battery chemistry specific charging profile the BCDC1225 is able to achieve and maintain an optimal charge to all major lead acid batteries and is suited for a battery bank size of 75-200AH. The BCDC dual battery charger will work from a wide operating range (9 – 32V) giving the option of charging from both 12V and 24V vehicle systems and also features a Maximum Power Point Tracking (MPPT) solar regulator, allowing you to deliver the maximum amount of power from your solar panels to your auxiliary battery. With multiple levels of fault protection. The smart charger will act as a dual battery isolator, should the voltage get too low, the start battery will be protected and with its compact size, ease of install and fully sealed casing it's unobtrusive and can handle the roughest tracks in outback Australia and even deep water crossings at Cape York; water, dust and vibration are no match for the in-vehicle DC smart charger! Features: Multi Stage DC-DC Battery Charger MPPT Solar Regulator Start Battery Isolator Fully sealed Super quiet operation Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries Specifications: Input (Operating) Voltage - 9-32VDC Maximum Charging Voltage - 15.4V Output System Voltage - 12VDC Input Current (Max.) - 25A Output Fuse Rating - 40A Standby Current Draw - <100mA Output Current Rating (Cont.) - 25A Input Fuse Rating - 40A Output Power - 375W Warranty - 2 Years Weight - 0.68kg Type Approval - E and CE Dimensions mm (LxWxH) - 150x120x37

    45%
    Off
    $360.00
    + Shipping: $9.00
  3. REDARC’s 12V 40A In-vehicle battery charger features technology designed to fully charge your batteries, regardless of their type or size. By providing a unique charging profile to each specific battery type, the REDARC In-Vehicle Battery Charger is able to achieve and maintain an optimal charge in your secondary battery. The In-Vehicle Battery Charger also features a Maximum Power Point Tracking (MPPT) solar regulator, allowing you to deliver the maximum amount of power from your solar panels to your auxiliary battery. Features Multi Stage DC-DC Battery Charger MPPT Solar Regulator Start Battery Isolator Fully sealed Super quiet operation Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries Specifications Input 9 - 32V DC Output Current 40A nominal Output Power 600W No Load Current <100mA Standby Current <8mA Min. O/P Battery Volts 4.2V Weight 680g Dimensions 150x120x37mm Standards CE, C-Tick, AS/NZS CISPR11:2004

    45%
    Off
    $425.00
    + Shipping: $9.00
  4. When you need a battery charger with a serious output, the REDARC BCDC1225D In-vehicle Battery Charger is up to the task. Boasting next generation in DC to DC charging technology, along with new and exciting features over previous models that make it one of the most advanced dual battery chargers currently on the market. Designed to keep your auxiliary battery charged whilst driving or with portable solar panels when you’re parked, the system charges your auxiliary battery to their optimum levels, using multi-stage DC DC charging. Efficient & Green Power Prioritised REDARC's BCDC1240D has seen advancements in both performance & efficiency with the built-in Maximum Power Point Tracking (MPPT) solar regulator allowing the unit to charge from both solar and the alternator simultaneously, as well as the new 'Green Power Priority' feature which will select solar charging as priority, meaning less load on the alternator. Works With All Battery Types This highly versatile charger features the same patented charging profiles as it’s predecessor and is compatible with both 12V and 24V battery systems, with a new lithium charging profile for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries. Another great feature of the new BCDC1240D is its ability to work alongside standard and ECU-controlled variable/smart alternators. Designed & Tested For Harsh Aussie Conditions Suitable for the majority of applications and battery banks over 200Ah, the REDARC BCDC1240D boasts multiple levels of fault protection and acts as a dual battery isolator. Should the voltage get too low, the start battery will be protected and with its compact size, ease of install and fully sealed casing it's unobtrusive and can handle the roughest tracks in outback Australia and even deep water crossings at Cape York; water, dust and vibration are no match for the in-vehicle DC smart charger! BONUS FUSE KIT - Valued At $39.99 To sweeten up the deal even more, for a limited time we're throwing

    30%
    Off
    $558.00
    + Shipping: $9.00
  5. The next generation in DC to DC charging technology,The REDARC BCDC1225D In-vehicle Battery Charger feature new and exciting features over previous models that make it one of the most advanced dual battery chargers currently on the market. Designed to keep your auxiliary battery charged whilst driving or with portable solar panels when you’re parked, the system charges your auxiliary battery to their optimum levels, using multi-stage DC DC charging. Efficient & Green Power Prioritised REDARC's BCDC1225D has seen advancements in both performance & efficiency with the built-in Maximum Power Point Tracking (MPPT) solar regulator allowing the unit to charge from both solar and the alternator simultaneously, as well as the new 'Green Power Priority' feature which will select solar charging as priority, meaning less load on the alternator. Works With All Battery Types This highly versatile charger features the same patented charging profiles as it’s predecessor and is compatible with both 12V and 24V battery systems, with a new lithium charging profile for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries. Another great feature of the new BCDC1225D is its ability to work alongside standard and ECU-controlled variable/smart alternators. Designed & Tested For Harsh Aussie Conditions Suitable for the majority of applications and battery bank ranging from 75-200AH, the REDARC BCDC1225D boasts multiple levels of fault protection and acts as a dual battery isolator. Should the voltage get too low, the start battery will be protected and with its compact size, ease of install and fully sealed casing it's unobtrusive and can handle the roughest tracks in outback Australia and even deep water crossings at Cape York; water, dust and vibration are no match for the in-vehicle DC smart charger! Features: Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suit

    49%
    Off
    $410.00
    + Shipping: $9.00
  6. Easy to use PWM controller with Intuitive LCD display for both 12/24V

    $139.00
    + Shipping
  7. Foldable solar panel is a Convenient solar mat that folds into a compact carry case, built with highly efficient monocrystalline Solar Cells. The Folding Solar Panel mat unfolds in just a few simple steps which makes it easy to take with you on your next trip. Due to its high quality A-grade solar cells, this Folding Solar mat still offers a large capacity of 125 watts despite its compactness. Since it is flexible, you can place it either flat or on an angle (e.g. on your vehicle windscreen) making it a Perfect portable solar panels for caravans, camping or 4x4 adventures.

    33%
    Off
    $439.00
    + Shipping
  8. 20A 12V/24V LCD DISPLAY PWM SOLAR PANEL REGULATOR Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing. We are reputable trader of solar charge controllers,power inverters,and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time. The solar controllers are built-in electronic fused that do not require replacements. The solar controllers electronics are protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. Solar controller is fully automatic and requires no adjustments or user selections. FEATURES LCD display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system With double USB ports charge Temperature compensation Dual mosfet reverse current protection, low heat production The Regulator is only suitable for lead acid batteries: OPEN, AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries SPECIFICATIONS Model No.: CY1220 Battery Voltage: 12V/24V auto Charge Current: 20A Discharge Current: 20A Working Temperature: -35 to +60/span Application: Home, Industrial, Commercial Self consume: 10mA Float Charge: 13V (default, adjustable) Discharge stop: 10.7V (default, adjustable) Discharge reconnect: 12.6V (default, adjustable) Weight: 150 g Size: 148.5 x 78 x 35 mm PACKAGE CONTENTS 1 x 20A 12V/24V LCD Display PWM Solar Panel Regulator 1 x User Manual 2 x Anderson Style Plug 4 x Terminals Note: This order will be dispatched from our Melbourne Warehouse. This item may arrive in a separate delivery to the rest of your order. Usual dispatch time is 1-2 business days from order. Due to the limited access of our carriers, there are certain postcodes that we are unable to deliver to. Please refer to the list below for more det

    $49.95
    FREE shipping
  9. 30A 12V/24V LCD DISPLAY PWM SOLAR PANEL REGULATOR Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing. We are reputable trader of solar charge controllers, power inverters and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time. The solar controllers are built-in electronic fused that do not require replacements. The solar controllers electronics are protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. Solar controller is fully automatic and requires no adjustments or user selections. FEATURES LCD display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system With double USB ports charge Temperature compensation Dual mosfet reverse current protection, low heat production The Regulator is only suitable for lead acid batteries: OPEN, AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries SPECIFICATIONS Model No.: CY3024 Battery Voltage: 12V/24V auto Charge Current: 30A Discharge Current: 30A Working Temperature: -35 C to +60 C Application: Home, Industrial, Commercial Self consume: 10mA Weight: 300 g Size: 135 x 70 x 35 mm PACKAGE CONTENTS 1 x 30A 12V/24V LCD Display PWM Solar Panel Regulator 1 x User Manual 2 x Anderson Style Plug Note: This order will be dispatched from our Melbourne Warehouse. This item may arrive in a separate delivery to the rest of your order. Usual dispatch time is 1-2 business days from order. Due to the limited access of our carriers, there are certain postcodes that we are unable to deliver to. Please refer to the list below for more details. We try our best to include all the undeliverable postcodes on the list, however, there are still a few postcodes that are undeliverable for som

    $49.95
    FREE shipping
  10. LCD display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system With double USB ports charge Temperature compensation Dual mosfet reverse current protection, low heat production The Regulator is only suitable for lead acid batteries:OPEN,AGM,GEL It is not suited for nickel metal hydride, lithium ions or other batteries Free 2x Anderson Style Plugs Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing. We are reputable trader of solar charge controllers,power inverters,and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time. The solar controllers are built-in electronic fused that do not require replacements. The solar controlers electronics are protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. Solar controller is fully automatic and requires no adjustments or user selections. Model NO.: CY3024 Battery Voltage: 12V/24V auto Charge Current: 30A Discharge Current: 30A Working Temperature: -35掳 C to +60掳 C Application: Home, Industrial, Commercial Self consume: 鈮?10mA Weight: 300g Size: 135*70*35mm Warranty1 Year WarrantyPackage Include 1 x Solar Charge Controlle 1 x User Manual 2 x Anderson Style Plug Warranty Conditions: Unless otherwise stated, we offer a 12 month warranty on all products from the date of purchase. It cannot be excluded under the Australian Consumer Law. The warranty period for commercial use is 3 months.You are entitled to a replacement or a full refund for a major failure of our product. You are also entitled to have goods repaired or replaced if the goods fail to be of acceptable quality.Our warranty cover does not include damage caused by normal wear and tear, accidents, misuse, neglect, and lack of maintenance,

    6%
    Off
    $34.65
    + Shipping
  11. LCD display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system With double USB ports charge Temperature compensation Dual mosfet reverse current protection, low heat production The Regulator is only suitable for lead acid batteries:OPEN,AGM,GEL It is not suited for nickel metal hydride, lithium ions or other batteries Free 2x Anderson Style Plugs Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing. We are reputable trader of solar charge controllers,power inverters,and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time. The solar controllers are built-in electronic fused that do not require replacements. The solar controlers electronics are protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. Solar controller is fully automatic and requires no adjustments or user selections. Model NO.: CY1220 Batt Voltage: 12V/24V auto Charge Current: 20A Discharge Current: 20A Working Temperature: -35鈩?to +60鈩?/span> Application: Home, Industrial, Commercial Self consume: ___10mA Float Charge: 13V(default,adjustable) Discharge stop: 10.7V(default,adjustable) Discharge reconnect: 12.6V(default,adjustable) Weight: 150g Size: 148.5*78*35mm Warranty1 Year WarrantyPackage Include 1 x Solar Charge Controller 1 x User Manual 2 x Anderson Style Plug 4 x Terminals Warranty Conditions: Unless otherwise stated, we offer a 12 month warranty on all products from the date of purchase. It cannot be excluded under the Australian Consumer Law. The warranty period for commercial use is 3 months.You are entitled to a replacement or a full refund for a major failure of our product. You are also entitled to have goods repaired or replaced if the goods fail to be of

    5%
    Off
    $31.19
    + Shipping
  12. 10A 12V 24V PWM Voltage Solar Charge Controller LCD Display Battery PV Cell Panel Charger Regulator

    $13.27
    + Shipping
  13. The Morningstar SunSaver 10A 12V Solar Regulator is the world's leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller. Features Seven versions available 100% solid state Series design (not shunt) True 0 to 100% PWM duty cycle Setpoint accuracy to 35 mV Rated for 25% overloads Fully encapsulated in epoxy potting Marine rated terminals / anodized case Temperature compensation Sealed / Flooded battery select No need to derate Parallel for 40 amps or more Green charging / Red LVD indicators

    $113.78
    + Shipping
  14. The Morningstar SunSaver 20A 12V Solar Regulator with LVD is the world's leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller. Features Seven versions available 100% solid state Series design (not shunt) True 0 to 100% PWM duty cycle Setpoint accuracy to 35 mV Rated for 25% overloads Fully encapsulated in epoxy potting Marine rated terminals / anodized case Temperature compensation Sealed / Flooded battery select No need to derate Parallel for 40 amps or more Green charging / Red LVD indicators

    $173.37
    + Shipping
  15. Commodore DC Electric Fence Energizer – 0.5 Joule / up to 5Km – 8,500 volts output.We believe these units are the best value in Australia, incorporating pulse technology for extended battery life & a fully weatherproof and dust-proof housing.This superbly designed and finished product includes battery clips so you can get set up immediately with your 12V Battery.This listing includes a 10W Panel with an internal weatherproof regulator so you can charge your battery as well. We suggest a minimum of a 5Ah battery.Full 12 months warranty, from a trusted Australian supplier.Package Includes:0.5J Fence Energiser10W Solar Panel with internal regulatorBattery ClipsInstruction ManualFeatures:Compact DesignWater proof & Dust proof housingEasy Access Fence Terminal wiringPulse current technology for extended battery lifeLow average current draw of 50mABright LED operation indicatorLarge colour coded crocodile clipsRear mounting hole for quick installationBuilt in lightning protectionInternal Radio Frequency Interference suppressionCE & RoHS certifiedSpecifications:Stored energy: 0.5JPower source: 12v DCAverage current: 50mAMaximum current: 2AOpen voltage: 8,500v500ohm load volts: 3,200vMax fence length: 5KmFence Length with Average Vegetation: 2KmWeight: 1KgSize: 185 x 110 x 60 mmCommodore products come with a 1 year warranty. If your item is to be found defective within the warranty period we will replace the defective part free of charge.You are welcome to send it back and our factory trained staff will carry out the repair for you free of charge within the warranty period. Shipping is cost of buyer.Consumables, cables, leads, etc.. are not covered by warranty, negligence or misuse is a warranty exclusion.Registered Responsible supplier with ERAC, Alternative Technology Association of Australia & Clean Energy Council of Australia.

    25%
    Off
    $149.00
    + Shipping
  16. Utilise MPPT technology for up to 30% increased power from your solar panels

    $389.00
    + Shipping
  17. Easy to use PWM controller with Intuitive LCD display for both 12/24V

    $119.00
    + Shipping
  18. Utilise MPPT technology for up to 30% increased power from your solar panels

    $279.00
    + Shipping
  19. Easy to use PWM controller with Intuitive LCD display for both 12/24V

    $94.00
    + Shipping
  20. Utilise MPPT technology for up to 30% increased power from your solar panels

    $149.00
    + Shipping
Back to top

Recently Viewed Solar PV Systems


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.