stratco greenhouse - The Best stratco greenhouse Prices In Australia - Page 2 | GetPrice
You searched

stratco greenhouse

Showing 21 - 40 of 182 results
Sort:
  1. Barge capping is the typical flashing piece used to finish off any roofing profile with the edge of the wall and runs down the length of the roof sheeting it is finishing off. Typically the barge flashing should be at least 40-50mm longer than the specified roof length to allow for the angle cutting at the top of the roof line and even longer if being used to continue past the gutter at the end of the roof sheets.

    $14.15
    + Shipping
  2. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $7.52
    + Shipping
  3. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $13.53
    + Shipping
  4. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $11.69
    + Shipping
  5. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $14.00
    + Shipping
  6. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $31.74
    + Shipping
  7. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $7.71
    + Shipping
  8. The innovative Stratco Modular Tank is unmatched in quality and value for money. Designed especially for homes, units and townhouses where space is limited, its clean, smooth lines will create a seamless blend with your home's architecture. only available in un-painted galvanised finish in NSW region Need Range? With 2 sizes to choose from, there is a Modular Tank for every requirement. The range includes a 1000 litre Two Module, an 870 litre Three Module Tank. Specifications Model Capacity Length Width Height 2 Module 1000 Litres 1400 mm 570 mm 1420 mm 3 Module 870 Litres 1760 mm 570 mm 1030 mm The 2 & 3 module tanks are the only ones available in NSW Need Stands? The stands are available in various heights, they are engineered for strength and made from galvanised steel. Optional adjustable feet kits are available with your stand, to provide a stable footing on uneven ground. Need Taps? The Two and Three Module Tanks are supplied with a 3/4� outlet and tap, while the Three Module Tank has a 1/2� outlet and tap. All Modular Tanks are supplied with an inbuilt filter, a 400mm x 400mm inspection point with a cover, and all inlets and outlets are protected with mosquito proof wire. Need Special Fittings? Optional extras include a different sized outlet and tap, a factory fitted flushing plug, and a tank stand tailored to your chosen size. Easy Maintenance While the inlet filter provided with your tank will stop contaminants entering the tank, it is also important to ensure the runoff area to the tank is free of debris. Clean the gutters every two months, or more regularly if trees overhang the roof. Remove any sludge from inside the tank when necessary. Do not scrub or scratch the interior surface of the tank as it has a protective coating covering the walls. Stratco tanks are produced from the highest quality materials and will provide many years of service if the important recommendations set out in the Selection Use and Maintenance of Stratco Steel Products brochure

    $812.21
    + Shipping
  9. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $5.34
    + Shipping
  10. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $8.68
    + Shipping
  11. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $14.69
    + Shipping
  12. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $49.74
    + Shipping
  13. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $11.85
    + Shipping
  14. The innovative Stratco Modular Tank is unmatched in quality and value for money. Designed especially for homes, units and townhouses where space is limited, its clean, smooth lines will create a seamless blend with your home's architecture. Available in un-painted galvanised or painted in your choice from a broad spectrum of colours, a Stratco Modular Tank is an ideal match to your outdoor environment. Need Range? With 2 sizes to choose from, there is a Modular Tank for every requirement. The range includes a 1000 litre Two Module, an 870 litre Three Module Tank. Specifications Model Capacity Length Width Height 2 Module 1000 Litres 1400 mm 570 mm 1420 mm 3 Module 870 Litres 1760 mm 570 mm 1030 mm The 2 & 3 module tanks are the only ones available in NSW Need Stands? The stands are available in various heights, they are engineered for strength and made from galvanised steel. Optional adjustable feet kits are available with your stand, to provide a stable footing on uneven ground. Need Taps? The Two and Three Module Tanks are supplied with a 3/4” outlet and tap, while the Three Module Tank has a 1/2” outlet and tap. All Modular Tanks are supplied with an inbuilt filter, a 400mm x 400mm inspection point with a cover, and all inlets and outlets are protected with mosquito proof wire. Need Special Fittings? Optional extras include a different sized outlet and tap, a factory fitted flushing plug, and a tank stand tailored to your chosen size. Easy Maintenance While the inlet filter provided with your tank will stop contaminants entering the tank, it is also important to ensure the runoff area to the tank is free of debris. Clean the gutters every two months, or more regularly if trees overhang the roof. Remove any sludge from inside the tank when necessary. Do not scrub or scratch the interior surface of the tank as it has a protective coating covering the walls. Stratco tanks are produced from the highest quality materials and will provide many years of service if the i

    $788.00
    + Shipping
  15. Rolltop ridge capping is the flashing used to finish off any gable roof that adds a little bit of the traditional style reminiscent of the older homes and styles of Australian buildings. The dimensions are close to 20/160/40 semi-circle/160/20mm. This item cannot be customised in its dimensions.

    $11.85
    + Shipping
  16. Stratco Roofing Batten 0.55mm

    $25.99
    + Shipping
  17. The Stratco Ceiling Batten is a quality product that benefits from a combination of high strength and rigidity with low weight and cost. It is compatible with all major domestic ceiling boards, which makes the Stratco Ceiling Batten an economical, easy to use and versatile system. Due to their steel construction, Stratco Ceiling Battens will help control timber rafter movement, which will assist in preventing the plasterboard ceiling from cracking in the future. Stratco Ceiling Battens are manufactured from hi-tensile zinc/alum steel that delivers superior strength and durability. The return edge is folded back on itself, providing a safe edge and a rigid profile. • 0.42mm thick hi-tensile steel is very strong, light weight and is easy to cut with tin snips. • The 20mm high profile provides strength and is designed to nest for easy handling and storage. • A cavity on the bottom prolongs the batten’s life by preventing condensation from forming. • A textured surface makes installation easy when locating and screwing plasterboard fixings. • Stratco Ceiling Battens are supplied in 6100mm lengths for easy handling and storage. Click here to download specifications on this product

    $10.80
    + Shipping
  18. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $9.73
    + Shipping
  19. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $21.50
    + Shipping
  20. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $17.50
    + Shipping
Back to top

Recently Viewed Roof & Gutter


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.