stratco roofing alsynite - Compare The Best stratco roofing alsynite Prices In Australia | GetPrice
You searched

stratco roofing alsynite

Showing 1 - 20 of 1,852 results
Sort:
  1. Stratco Roofing Batten 0.55mm

    $25.99
    + Shipping
  2. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $14.00
    + Shipping
  3. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $17.50
    + Shipping
  4. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $9.73
    + Shipping
  5. Barge capping is the typical flashing piece used to finish off any roofing profile with the edge of the wall and runs down the length of the roof sheeting it is finishing off. Typically the barge flashing should be at least 40-50mm longer than the specified roof length to allow for the angle cutting at the top of the roof line and even longer if being used to continue past the gutter at the end of the roof sheets.

    $14.15
    + Shipping
  6. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $40.37
    + Shipping
  7. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $14.69
    + Shipping
  8. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $17.93
    + Shipping
  9. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $49.74
    + Shipping
  10. The Stratco Ceiling Batten is a quality product that benefits from a combination of high strength and rigidity with low weight and cost. It is compatible with all major domestic ceiling boards, which makes the Stratco Ceiling Batten an economical, easy to use and versatile system. Due to their steel construction, Stratco Ceiling Battens will help control timber rafter movement, which will assist in preventing the plasterboard ceiling from cracking in the future. Stratco Ceiling Battens are manufactured from hi-tensile zinc/alum steel that delivers superior strength and durability. The return edge is folded back on itself, providing a safe edge and a rigid profile. • 0.42mm thick hi-tensile steel is very strong, light weight and is easy to cut with tin snips. • The 20mm high profile provides strength and is designed to nest for easy handling and storage. • A cavity on the bottom prolongs the batten’s life by preventing condensation from forming. • A textured surface makes installation easy when locating and screwing plasterboard fixings. • Stratco Ceiling Battens are supplied in 6100mm lengths for easy handling and storage. Click here to download specifications on this product

    $10.80
    + Shipping
  11. The valley flashing is the flashing that is used when you have a change in direction of the roof sheets normally when you have a 90 degree 'hip' or 'dog-leg' in the roof and goes under the sheets.

    $11.00
    + Shipping
  12. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $63.06
    + Shipping
  13. Rolltop ridge capping is the flashing used to finish off any gable roof that adds a little bit of the traditional style reminiscent of the older homes and styles of Australian buildings. The dimensions are close to 20/160/40 semi-circle/160/20mm. This item cannot be customised in its dimensions.

    $11.85
    + Shipping
  14. used for attaching the gutter to metal fascia - it clips internally

    $1.07
    + Shipping
  15. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $11.85
    + Shipping
  16. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $7.71
    + Shipping
  17. Apron flashings are the flashings that are used when the top of a roof butts up in to a vertical wall surface to prevent water getting in below the beginnings of the roof sheets or tiles it is typically a flat vertical surface of 200mm with a 180mm horizontal outward kick and and a 20mm downturn the downturn prevents the outward kick from buckling and getting a 'wavy' look to it. Order the apron flashing with the internal angle being greater than 90 degrees to allow for the downward pitch of the roof add the pitch of the roof to 90 degrees when ordering.

    $11.00
    + Shipping
  18. Stratco 125mm OG Gutter

    $12.59
    + Shipping
  19. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $14.10
    + Shipping
  20. Stratco purlins are crisp, clean and square and by any assessment are a quality product. There is no need to tolerate rounded corners, inaccurate lengths, or out of square purlins any more. Technical Drawings will be required if you need punching (no extra for this) - please advise in the notes section of your enquiry if this is required

    $10.90
    + Shipping
Back to top

Recently Viewed Roof & Gutter


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.