Hydraulic And Garage Tools From All four x 4 spares | Best Prices in Australia | GetPrice
Showing 1 - 20 of 21 results for

Hydraulic And Garage Tools From All four x 4 spares

Sort:
  1. Rear Main Seal Speedi Sleeve 95x9mm suitable for Landcruiser 1HZThis is a high quality aftermarket 95mm x 9mm Speedi Sleeve Suits Rear Main Engine Seal of Toyota Landcruiser 1HZ 4.2L 6 Cyl Diesel engines ref: This is a high quality aftermarket partEquivalent original equipment part number(s) provided for reference purposes only 99374 Speedi Sleeve suitable for Landcruiser 1HZ
    + Shipping: $11.50
  2. This is a new Front Hub Nut Socket Tool to suit All Nissan Patrol GU and Late GQ ( 2.8 Turbo Diesel and GQ in EFI Petrol models only)This does not suit early GQ Patrol or MQ, MK or Y60The hub nuts in the late GQs and GU are circular, with holes that require pins to slot in and turnThis hub socket has 2 pins that slot into the holes on hub nuts, and can be used with 1/2' drive socket to adjustIt is a quality steel productPart number for reference: 4H501 4H501 Front Hub Nut Socket for Nissan Patrol GU and Late GQ 2 Pin 1/2in Drive 4H501
    + Shipping: $11.50
  3. Piranha Recovery Kit Basic. Reliably strong and built right here in Australia, Piranha recovery kits are hard to beat in value for money and quality. You can rely on Piranha recovery gear when it comes to the harshest of Australian conditions because thats exactly where it was tested..... and proven! Kit includes heavy duty bag, gloves, 8000kg snatch strap and 2x 4.7T bow shackles. OFFROAD COPY FOR CSE
    + Shipping
  4. Jack Handle Rod suitable for Nissan Pathfinder D21 1986-1995 Genuine 99552-01G00Jack Handle Rod for Nissan Pathfinder D21 1986-1995 GenuineThis is a genuine Nissan Jack handle rod Suits Nissan Pathfinder, D21, built from 12/1986 to 10/1995 Part number for reference: 99552-01G00 Jack Handle Rod suitable for Nissan Pathfinder D21 1986-1995 Genuine 99552-01G00
    + Shipping
  5. 3 piece Jack Handle Set suitable for Hilux Landcruiser Patrol GenuineThis is a new genuine Toyota 3 piece Jack Handle Set When you buy a 4WD you should always check that the correct jack and tools are in the vehicle Often the jack handle has been left out or misplaced This jack handle kit will suit all Hilux, Landcruiser up to and including 80 series Also suits GQ and GU Patrol / Ford Maverick DA Part number for reference: 09113-35110 99552-VB000W Equivalent original equipment part number(s) provided for reference purposes only 09113-35110 3 piece Jack Handle Set suitable for Hilux Landcruiser Patrol Genuine
    + Shipping
  6. Tool for removing the paper filter from the canister on TDV6 2.7 diesel engines fitted to Jaguar, Land Rover vehicles Models: Range Rover Sport, Discovery 3, Discovery 4, X350-XJ, X250XF, X200-S type 32mm socket required for the filter housing - Laser Part No 0823 Also suitable for most vehicles with paper elements Prevents damage to the filter housing Part number for reference: 5342 303-1128 5342 Oil Filter Element Removal Tool for Discovery Range Rover 2.7 TDV6 5342 303-1128
    + Shipping: $11.50
  7. This is a new 10 Piece Socket Set Whitworth/ BSF (Imperial) Thread 3/8' driveContains 7 Whitworth sockets: 1/8ww, 3/16ww, 1/4ww, 5/16ww, 3/8ww, 7/16ww, 1/2ww, 1 extension bar 125mm, 1 universal joint, 1 pear type ratchet handle with quick release functionTools Chrome Vanadium Steel and are housed in a steel case ET10540 10 Piece Socket Set Whitworth BSF Imperial Thread 3/8' - Eurotech Brand
    + Shipping: $17.00
  8. This is a new Whitworth/ BSF Thread 8 Piece Socket Set, 1/2' DriveIt is in Imperial (or Whitworth) Thread and is a Eurotech ProductThe set contains 8 Chrome Vanadium Steel Sockets in the following sizes: 1/4ww, 5/16ww, 3/8ww, 7/16ww, 1/2ww, 9/16ww, 5/8ww and 3/4wwThey come in a steel case and are heavy duty ET10480 8 Piece Socket Set Whitworth/ BSF Thread, 1/2' Drive, Imperial Thread Eurotech
    + Shipping: $17.00
  9. Speedi Sleeve 42.06mm Front Rear Diff Pinion suitable for Nissan Patrol GUSpeedi Sleeve Nissan Patrol GU, Suits Patrol GU Front And Rear Differential Pinion Flange, And Other Applications Requiring 42.06mm Size 99165 Speedi Sleeve 42.06mm Front Rear Diff Pinion suitable for Nissan Patrol GU
    + Shipping: $11.50
  10. Rear Main Seal Speedi Sleeve 95x12mm suitable for Landcruiser 1HZThis is a high quality aftermarket 95mm x 12mm Speedi Sleeve Suits Rear Main Engine Seal of Toyota Landcruiser 1HZ 4.2L 6 Cyl Diesel engines ref: This is a high quality aftermarket partEquivalent original equipment part number(s) provided for reference purposes only 99364 Speedi Sleeve suitable for Landcruiser 1HZ
    + Shipping: $11.50
  11. Speedi Sleeve 48.56mm suitable for Front Crank Landcruiser 2H Discovery 1 V8Front Crank Speedi Sleeve 48.56mm or 1.912 inches, Landcruiser 2H, Land Rover Discovery 1 V8, 99192. Suits Landcruiser 2H 4.0 ltr Diesel Engine And LandRover Discovery 1 V8 Front Timing Case Seal. Also Other Applications Requiring 48.56mm Or 1.912 Inch Speedi Sleeves.This is a high quality aftermarket partEquivalent original equipment part number(s) provided for reference purposes only 99192 Speedi Sleeve 48.56mm suitable for Front Crank Landcruiser 2H Discovery 1 V8
    + Shipping: $11.50
  12. Timing Tool Pin Set for Land Rover 200Tdi 300Tdi Defender DiscoveryThis is a new quality aftermarket 2 piece timing tool pin setSuits all Land Rover 200Tdi and 300Tdi turbo dieselKit consists of injection pump pin and flywheel pinUsed while servicing or replacing the timing beltProfessionally made high quality toolNot for vehicles with EDC (electronic diesel control)EDC engines (Rare in Australia) have more than one wire coming from the injector pump, non EDC engines have only one wire Timing Tool Pin Set for Land Rover 200Tdi 300Tdi Defender Discovery LRKIT3188
    + Shipping: $11.50
  13. Piranha Recovery Kit Basic-II. Reliably strong and built right here in Australia, Piranha recovery kits are hard to beat in value for money and quality. You can rely on Piranha recovery gear when it comes to the harshest of Australian conditions because thats exactly where it was tested..... and proven! Kit includes heavy duty bag, gloves, 8000kg snatch strap, 4m tree trunk protector and 2x 4.7T bow shackles OFFROAD COPY FOR CSE
    + Shipping
  14. Wheel Bearing Hub Nut Socket 52mm Land Rover Various. Top quality box spanner or socket to suit Land Rover wheel bearing lock and adjuster nuts. Will fit Series 2/2a/3, County, Defender, Range Rover Classic, Discovery 1 and 2. Also suits GQ Nissan Patrols. 606435 Wheel Bearing Hub Nut Socket 52mm For Land Rover Various & GQ Patrol 606435
    + Shipping: $15.00
  15. Viscous Fan Clutch Removal Tool Td5 and V8 Land Rover Discovery 2 Range Rover Defender 1990-2006. OEM tool code 303-904. This tool set includes 2 spanners. 1x 36mm open end and 1x 5 holed horse shoe design. Made in Sheffield England 5730 Viscous Fan Clutch Removal Tool Td5 and V8 Discovery 2 Range Rover Defender
    + Shipping: $25.00
  16. Speedi Sleeve, Multiple Applications 48mm Size, This Part Is A Seal Speedi Sleeve 99189 Speedi Sleeve
    + Shipping: $15.00
  17. 1 Litre Tom Thumb Oil Pump Product Features: - 1 litre top up utility pump - Ideal for hard to get to oiling points - Integrated carry handle - 500mm long PVC hose and spout - Aluminium construction - Nylon head and handle - Nozzle drain back holder Suitable Fluids: - Two stroke and lubricant oil - Hydraulic oil - Gear oil - Engine oil - Brake fluid - Automatic transmission fluid (ATF) - Upper cylinder lubricant CA586 Tom Thumb Oil Pump 1 Litre
    + Shipping: $11.50
  18. Adjustable Brake Caliper Piston Windback Tool. This tool has a cam action adjustable adapter that will apply to over 1500 vehicles. The adjuster cam pins are rated to 50Nm torque and are replaceable. It has right and left handed threaded ends to suit either style piston. Made in Sheffield England by Lasertools. There is a great video which demonstrates this versatile tool go to youtube and search for 5668 brake rewind tool. 5668 Adjustable Brake Caliper Piston Windback Tool Made in Sheffield England
    + Shipping: $15.00
  19. This is a new Heavy Duty Wheel Brace to suit the following Land Rover vehicles: Series 2a (large diameter nuts from approx 1969) and Series 3 Defender Discovery 1 Discovery 2 Range Rover Classic Range Rover P38 Part numbers for reference: LR011870 NTC7829 Suits 1 1/16in or 27mm wheel nuts LR011870 Heavy Duty Wheel Brace for Land Rover Series Defender Discovery Range Rover
    + Shipping: $17.00
  20. Oil Filter Wrench Removal Tool suitable for VDJ Landcruiser 1VD-FTV V8 DieselThis part is a quality aftermarket Toledo brand oil filter wrench Suitable for Toyota Landcruiser VDJ76, VDJ78, VDJ79 and VDJ200, fitted with the 1VDFTV 4.5 litre V8 turbo diesel engine This wrench, with a 3/8" square drive, makes it much easier to remove and re-install the plastic oil filter cap without damaging it This product is sourced from a quality aftermarket supplier. We take care and effort to ensure we supply the best aftermarket products available. These are sometimes not the cheapest. We believe quality is the most important factor Part number for reference: 09228-06502A Equivalent original equipment part number(s) provided for reference purposes only Oil Filter Wrench Removal Tool suitable for VDJ Landcruiser 1VD-FTV V8 Diesel
    + Shipping: $11.50
Back to top

Recently Viewed Hydraulic And Garage Tools


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.