Hydraulic And Garage Tools - Page 2 | Best Prices in Australia | GetPrice
Showing 21 - 40 of 494 results for

Hydraulic And Garage Tools

Sort:
  1. The STORMIX 5.0 is a submersible aspiration aerator which oxygenates by drawing in and dispersing air at depth in the form of micronised bubbles.
    + Shipping
  2. 3 piece Jack Handle Set suitable for Hilux Landcruiser Patrol GenuineThis is a new genuine Toyota 3 piece Jack Handle Set When you buy a 4WD you should always check that the correct jack and tools are in the vehicle Often the jack handle has been left out or misplaced This jack handle kit will suit all Hilux, Landcruiser up to and including 80 series Also suits GQ and GU Patrol / Ford Maverick DA Part number for reference: 09113-35110 99552-VB000W Equivalent original equipment part number(s) provided for reference purposes only 09113-35110 3 piece Jack Handle Set suitable for Hilux Landcruiser Patrol Genuine
    + Shipping
  3. This is a new 10 Piece Socket Set Whitworth/ BSF (Imperial) Thread 3/8' driveContains 7 Whitworth sockets: 1/8ww, 3/16ww, 1/4ww, 5/16ww, 3/8ww, 7/16ww, 1/2ww, 1 extension bar 125mm, 1 universal joint, 1 pear type ratchet handle with quick release functionTools Chrome Vanadium Steel and are housed in a steel case ET10540 10 Piece Socket Set Whitworth BSF Imperial Thread 3/8' - Eurotech Brand
    + Shipping: $17.00
  4. Tool case drawer for the 0450 Suitable for the Pelican Tool Chest Model 0450WD - 4 inch ONLY Pelican Cases are Unbreakable, water resistant, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for your equipment.
    + Shipping
  5. Adjustable and removable tray dividers for easy customization of this 1460 tool chest You buy the best tools for the job, why not provide them the best available protection? The new 1460 Mobile Tool Chest adapts to all your needs, whether they are for electrical, mechanical, or general repair work. *Top lid opens up to 180 for on-the-field anti-roll stability when open *O-ring seal for dust and water resistant seal (IP66) *Easy open Double Throw latches *Open cell core with solid wall design - strong, light weight *Dustproof, Crushproof and Water resistant *Automatic Pressure Equalization Valve *Comfortable rubber over-molded handles *Stainless steel hardware and padlock protectors *Personalized nameplate service available ***Case covered by Lifetime warranty (Tray system not covered by lifetime warranty) Tray sizes: Top tray 17.65 x 8.2 x 2.4 inch Bottom tray 17.3 x 8.0 x 2.3inch Interior Dimensions: 47.1 x 25.2 x 27.7 cm Exterior Dimensions: 52.9 x 32.3 x 32.4 cm Weight: 5.9kg
    FREE shipping
  6. 8-Drawer Tool Trolley Black and Grey Made from powder coated metal for enhanced rust resistance, this heavy-duty Tool Trolley is built with varying depths and sizes to keep your precious tools in their proper place with drawers that are specifically designed to cater to various tool sizes. From top to bottom, each drawer slides in and out effortlessly on quality ball bearings incorporated into the metal drawer runners. Each drawer is also lined to protect your tools and keep them from moving about. Not least, the Tool Trolley is installed with a round barrel lock that is more reliable and secured compared to general locks. Besides being an instant storage solution for your workshop equipment, the Tool Trolley is also highly portable with a sturdy side handle and swivelling anti-slip castor wheels with brakes to transport it to any work location when necessary. Features High gloss finish Heavy-duty and large capacity Superior ball bearing slide All drawers with scratch proof liners Sturdy construction Multi-size drawers Lockable drawers (Only for the chest) Rust-resistant coated Swivelling anti-slip castor wheels with brakes Package Contents: 1 x GIANTZ 8-Drawer Tool Trolley 2 x Keys
    FREE shipping
    (20% Off)
  7. CLEAR STORAGE BOXES – FISCHER PLASTIC See through parts box produced from Randon Co-polymer. For the handyman – stores nails, screws, bolts, nuts and washers. For the tradesman – stores and protects all small parts and components. For the home – stores sewing needs and accessories. FEATURES: Ideal for tradesmen, handymen or fishermen. Hinged lid with snap locking latch. Flexible unbreakable plastic for rugged use. Made in Australia SPECIFICATIONS: CODE DESCRIPTION SIZE WIDTH DEPTH HEIGHT 1H-031 1 Compartment (Small) 188mm 118mm 31mm 1H-030 5 Compartment (Small) 188mm 118mm 31mm 1H-029 1 Compartment (Medium) 195mm 157mm 48mm 1H-038 6 Compartment (Medium) 195mm 157mm 48mm 1H-039 14 Compartment (Medium) 195mm 157mm 48mm 1H-092 1 Compartment (Large) 310mm 200mm 48mm 1H-093 12 Compartment (Large) 310mm 200mm 48mm 1H-094 18 Compartment (Large) 310mm 200mm 48mm 1H-032 1 Compartment (Medium) 195mm 136mm 66mm 1H-097 20 Compartment (XLarge) 350mm 270mm 55mm 1H-090 3 Compartment (Large) 310mm 200mm 80mm 1H-095 6 Compartment (Large) 310mm 200mm 80mm 1H-091 1 Compartment (Xlarge / Xdeep) 350mm 270mm 100mm 1H-098 8 Compartment (Xlarge / Xdeep) 350mm 270mm 100mm
    + Shipping
  8. Neatly organise and easily access all your tools in this sturdy, steel tool box. Sturdy, steel construction Convenient cantilever tray Keep your tools organised with the Stanley Single Compartment Cantilever Tool Box. The convenient cantilever tray allows for easy access to all your tools.
    + Shipping
  9. This two pack of superb-quality ramps ensures the safe and efficient loading of motorbikes and scooters – each supporting a maximum capacity of 680kg when fully extended. Load ATVs, golf buggies, motorcycles and more onto small trucks Each ramp supports up 680kg (maximum weight both ramps can support is 1360kg) Fold the ramp and transport anywhere – weighs just 16kg! Adjust the strong support legs to create a smooth, stable gradient The Certa Aluminium Folding Loading Ramp is perfect for anyone who regularly transports small vehicles. The ramp consists of two lightweight pieces which fold easily for portability. With a maximum capacity of 680kg, this ramp offers enhanced stability thanks to its robust support legs. Adjust the leg height to suit your truck for a safe, smooth run. Highlights: Constructed from strong, lightweight aluminium Each ramp supports a maximum loading capacity of 680kg Features optional support legs – adjustable height
    + Shipping
    (37% Off)
  10. Delivery available Aus-wide, Please use the Postage calculator to check shipping cost. Pickup is available in Melbourne. Please call us on 1300 144 100 during office hours to see pickup location(s) currently available.
    + Shipping
    (46% Off)
  11. Delivery available Aus-wide, Please use the Postage calculator to check shipping cost. Pickup is available in Melbourne. Please call us on 1300 144 100 during office hours to see pickup location(s) currently available.
    + Shipping
    (49% Off)
  12. Our new Extreme Offroad Series (XO) Jockey Wheel is probably the toughest, most advanced Jockey Wheel in Australia today. But not only is it tough, its also versatile with multiple height options, a highly maneoverable trailing yoke design and 5 different yoke locking positions.Magnetic, removable, side-winding handleEasier raising & lowering of trailers/caravans - away from stone guards, toolboxes or jerry can holdersMagnetic, removable handle ensures safe stowage and prevents damage in offroad situationsHeavy duty body with 750kg ratingIncreases load carrying capacity and eliminates the likelihood of "bend" under weight4 x adjustable height positions250mm height adjustability at each of the 4 positions, whilst maintaining a central swivel point for extra strengthHeavy duty swivel clamp4 bolt pivot point ensures no more bowing under weightSuitable for 75mm, 100mm, 130mm and 150mm drawbarsComes with mounting hardware - no more welding onto drawbarsEasy-pivot trailing yoke designWheel pivots easily, even under heavy load or on soft groundDual wheel with sealed bearings & offroad treadIncreases offroad grip and spreads the loadVariable yoke lockAllows you to lock the yoke in 1 of 5 positions when the jockey wheel is stowed, to allow for clearance of stone guards, toolboxes, jerry can holders etcRust resistant finishSalt spray tested for 600 hours
    FREE shipping
  13. Heavy Duty Jockey Wheels8" Steel rim, solid rubber wheel. Rust resistant. Dacromet finish. 500kg load capacity. Extension 250mm.0
    FREE shipping
  14. Automate your gate with this heavy duty double swing solar gate opener, with lower gears and powers for gates 1-2.5m up to 300kg. All batteries and wiring included!
    + Shipping
  15. Open your gate from far distances and without worry about power, with this remote controlled solar gate opener. It's a stand-alone unit, no-grid connection needed! Get this comprehensive kit for a no-grid connection, completely stand alone experience! With a stainless steel design, it can power tough double swing gates weighing up to 300kg, measuring between 1.0m to 2.5m. This product comes with an upgraded 20W solar panel and has faster operating speed and longer service life. This is one tough little package - get yours today!
    + Shipping
  16. Sweeps five times faster than a conventional broom. No need to bend. Ergonomic features. Space-saving storage. These are just a few of the advantages that speak for the S 750 sweeper from K�rcher. This rugged, unbreakable and corrosion-resistant sweeper is easy to push and very easy to manoeuvre. Dust and dirt are safely contained in the on-board waste container: easy, quick and clean! The S 750 features a powerful roller brush and side brush with a total working width of 700 mm. The side brush has extra long bristles for cleaning in corners and edges. The contact pressure of the folding side brush can be infinitely adjusted with a knob. The push handle can be adjusted to two different heights for easy use. With fold down push handle for quick and easy space-saving storage: simply fold down the push handle and place the sweeper upright. That's all. The self-standing waste container is stable and easy to remove. S 750 - powerful and convenient.
    + Shipping
  17. 1000-lb/450-kg lift capacity 45° wheel chock Fine adjustment tyre vice Powder coated steel frame Five grip strips Quad tie-down anchoring points Non-slip foot pedal option for raising and releasing Anti-drop safety mechanism Arm length adjustment Back-saving 200-815mm locked working height Slanted loading bridge Batch has exceeded testing requirements
    + Shipping
  18. This foldable non-slip step ladder is a must have for reaching new heights around the house or office. Climb up safely with dual handrails and no-slip rubber surfaces and keep the ladder folded and tucked away when not in use to save space. Made with a rugged steel frame, this ladder is no push over when it comes to keeping you where you need to be. Features: Open dimension: 1590 x 530 x 815mm Closed dimension: 1715 x 530 x 105mm Step size: 380 x 260mm powder coated steel frame Net weight: 10.9kg Gross weight: 12.0kg Distance from the ground to top step (when product is open): approximately 96.5cm Weight capacity for each step: 150kg
    + Shipping
  19. Add a touch of the contemporary to your home or workplace with this Remote-Powered Automatic Swing Gate Opener. This heavy duty, safe-to-use, and easy to install product can softly and smoothly open and shut gates that weigh up to 300kg and measure up to 3 metres wide. For your safety, the gate opener comes with an auto-reverse function, a customisable auto-close function, and an emergency key to use in the event of a power failure. Features: Powerful 24V DC motor Soft and smooth openings and closings Stop and reverse mode in case of obstruction Auto-close is fully adjustable between 0 and 99 seconds Maximum motor operation is customisable between 0 and 50 seconds Emergency key for manual operation in case of power failure 2 x Remote Controls Easy-to-use digital display with status and menu settings Full user manual included Gate is NOT included Specifications: Input: 230V/50Hz Voltage: 24V DC Power: 80W Current: 3 amps Speed of actuator: 16mm/s Max travel: 385mm Maximum weight of gate: 300kg Maximum width of gate: 3m Protection class: IP44 Carton dimensions: 89 x 45 x 18 cm Gross weight: 11.2kg (carton)
    + Shipping
  20. Automatic gates are becoming more and more common as time goes on - thanks to their safety and security value, their ease of use, and for their modern and stylish design. Think about it: If you find having to leave your car in the dark or cold to open/close your gate a hassle (and unsafe), then an automatic gate is perfect for you. Or if you find opening and/or closing a heavy gate is simply too much work, opt for an automatic gate and all you have to do is push a button or two. And to experience the full benefit of an automatic gate, you’ll need a remote. Without one, you may as well have bought a static gate. This remote control is suitable for the range of Randy & Travis swinging and sliding automatic gates. Please feel free to contact us if you need more information. Compatible with: HUH-ET HUH-FU HUH-LA HUH-MB HUH-JY HUH-KZ HUH-GV HUH-HW HUH-PE HUH-IX HUH-AX HUH-SH HUH-CR HUH-DS
    + Shipping
Back to top

Recently Viewed Hydraulic And Garage Tools


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.