Insulation | Compare Prices & Save on shopping in Australia | GetPrice
Showing 1 - 20 of 823 results for

Insulation

Sort:
  1. cheap price Bradford Ultratel (48kg/m3) - PLAIN is available with a range of factory applied facings that offer both vapour seal and acoustic benefits. These types of materials are often specified and used as internal ductlining materials in high performance air conditioning applications. Sydney, Melbourne, Perth, Brisbane, Adelaide and Canberra.
    + Shipping
  2. cheap price Bradford Supertel (32kg/m3) - Med Duty Face is a low densitis also available with a range of factory applied facings. Depending upon which facing product is chosen it can offer a combination of acoustic, thermal and moisture control for commercial air conditioning and acoustic enclosures. Sydney, Melbourne, Perth, Brisbane, Adelaide and Canberra.
    + Shipping
  3. Wakaflex is the longest established (2004) and leading non lead flashing solution available in Australia. Suitable for most roof profiles and types it is the only butyl based roof flashing with a unique chemical self-bonding ability and without a fully-backed adhesive for easier installation. In development and testing for over 4 years it has an aluminium honeycomb mesh embedded into the UV resistant butyl based rubber which allows for easy dressing to any roof profile without the use of any tools or additional silicone. With a malleability that provides a water tight seal immediately it is perfect for use in pitch transitions, wall abutments, step and chimney flashings. It’s lighter, easier and quicker to use, looks better and is safer than lead. Try it on your next project and see for yourself why so many roofers have already left lead behind. Suitable for Rainwater Harvesting Systems – Wakaflex complies with requirements for AS/NZS 4020:2005 ‘Products for use in contact with Drinking Water’. CSIRO Tested – Wakaflex complies with the CSIRO requirements for AS/NZS 2904:1995 ‘Damp Course Flashing’. Non Toxic – There are no potential hazards for installers and no contamination for run-off water. Lightweight – Wakaflex weighs only 4kg for a 5m roll. 3 Sizes – Wakaflex is available in three widths: 280mm, 370mm & 560mm. Quick & Easy To Install – There are no special skills required and Wakaflex can be installed up to 50% quicker than similar flashings. Scissors or a Stanley knife is all that’s required to install. Temperature Stability – -40º C to 100º C in accordance with DIN 52133. Can be laid in hot or cold conditions. UV Resistant – In accordance with DIN 16726. Laying Length – Wakaflex does not expand or contract in hot or cold weather, so it can be installed in complete 5m lengths and with only a 30mm lap joint Wakaflex will chemically bond with itself for a secure seal. Over-flashing – Wakaflex must always be over flashed or chased into brickwork. Guaranteed – W
    + Shipping
  4. Wakaflex is the longest established (2004) and leading non lead flashing solution available in Australia. Suitable for most roof profiles and types it is the only butyl based roof flashing with a unique chemical self-bonding ability and without a fully-backed adhesive for easier installation. In development and testing for over 4 years it has an aluminium honeycomb mesh embedded into the UV resistant butyl based rubber which allows for easy dressing to any roof profile without the use of any tools or additional silicone. With a malleability that provides a water tight seal immediately it is perfect for use in pitch transitions, wall abutments, step and chimney flashings. It’s lighter, easier and quicker to use, looks better and is safer than lead. Try it on your next project and see for yourself why so many roofers have already left lead behind. Suitable for Rainwater Harvesting Systems – Wakaflex complies with requirements for AS/NZS 4020:2005 ‘Products for use in contact with Drinking Water’. CSIRO Tested – Wakaflex complies with the CSIRO requirements for AS/NZS 2904:1995 ‘Damp Course Flashing’. Non Toxic – There are no potential hazards for installers and no contamination for run-off water. Lightweight – Wakaflex weighs only 4kg for a 5m roll. 3 Sizes – Wakaflex is available in three widths: 280mm, 370mm & 560mm. Quick & Easy To Install – There are no special skills required and Wakaflex can be installed up to 50% quicker than similar flashings. Scissors or a Stanley knife is all that’s required to install. Temperature Stability – -40º C to 100º C in accordance with DIN 52133. Can be laid in hot or cold conditions. UV Resistant – In accordance with DIN 16726. Laying Length – Wakaflex does not expand or contract in hot or cold weather, so it can be installed in complete 5m lengths and with only a 30mm lap joint Wakaflex will chemically bond with itself for a secure seal. Over-flashing – Wakaflex must always be over flashed or chased into brickwork. Guaranteed – W
    + Shipping
  5. ComfortSeal R2.5 Bradford Insulation Batts 430mm - pack 16 keeps the heat outside and the comfort in. Ceiling batts can keep your home around 7°C cooler in summer and 10°C warmer in winter. ComfortSeal batts are available in a full range of R values and are made to suit 99% of ceiling joists. ComfortSeal batts are guaranteed to deliver the R value you pay for - cover per pack 9.0m2
    + Shipping
  6. Reflective Thermal Break Insulation. A very popular Thermal Break for steel frame and metal on metal construction. Very economical and only 6.5mm thick, Reflecta-Break™ is light and easy to handle, as well as being highly effective in stopping heat transfer. Also a popular choice for sheds. Great for use as a Cavity Wall Insulation, click here for more details. Compliant to use as a THERMAL BREAK GUARANTEED 15 YEARS* Reflecta-Break™ from Green Insulation� features: Unique patented protective durable polymer coating that guarantees against oxidisation and corrosion for 15 years Heat laminated, foam core providing an exceptional barrier against conductive heat, humidity, water and vapour penetration Two outer layers of 99%+ pure aluminium (with reinforced weave/scrim on both sides) Reflecting up to 97% of radiant heat Excellent fire properties Excellent acoustic properties Environmentally/Eco friendly and fibre-free Anti-slip properties make it safer for installers Compliance with the latest insulation standards 30m2 roll (1350mm x 22.25m) NEW SIZE Green Insulation’s� Reflecta-Break™ Foam Core Insulation is a product you can have absolute confidence in. This leading edge foam core eco-product will ensure your project’s sustained comfort and performance like no other product in Australia. Product Data Code RC3212 Silver side Emittance E0.03 Antiglare side Emittance E0.08 Roll Size 1.35m x 22.25m (30m2) Roll Diameter 560mm Product Thickness 6.5mm Roll Weight 12.5kg Product Testing Thermal Performance AS/NZS 4859.1 - 2002 Material Thermal Resistance 0.24 (m²K/W) Corrosion & Oxidisation Resistance Patent (Green Side) Anti-Slip Patent (Green Side) Flammability AS/NZS 1530.2 - 1993 Ignitability AS/NZS 1530.3 - 1999 Spread of Flame AS/NZS 1530.3 - 1999 Heat Evolved AS/NZS 1530.3 - 1999 Smoke Developed AS/NZS 1530.3 - 1999 Product Emittance (Green Side) 0.08 Product Emittance (Silver Side) 0.03 Textile Testing Extra Heavy Duty Dry Delamination AS/NZS 4201.1 - 1994 Wet Delamin
    + Shipping
  7. Bradford Ceiling Batts - 240x430x1160
    + Shipping
  8. Knauf Ceiling Batts - 195x430x1160
    + Shipping
  9. Bradford Optimo Underfloor Insulation - 90 x 1160 x 415
    + Shipping
  10. Flectcher Ceiling Batts - 210x430x1160
    + Shipping
  11. Knauf Ceiling Batts - 210x430x1160
    + Shipping
  12. High Density Acoustic Batts 18kg/m3,
    + Shipping
  13. cheap price Bradford Ultratel (48kg/m3) - PLAIN is available with a range of factory applied facings that offer both vapour seal and acoustic benefits. These types of materials are often specified and used as internal ductlining materials in high performance air conditioning applications. Sydney, Melbourne, Perth, Brisbane, Adelaide and Canberra.
    + Shipping
  14. Flectcher Ceiling Batts - 175x580x1160
    + Shipping
  15. Bradford Ceiling Batts - 260x430x1160
    + Shipping
Back to top

Recently Viewed Insulation


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.