Lian Li PC60FN
Sorry, this product is currently unavailable.
Manufacturer: Lian Li. The PC-60FN chassis has all the sharp edges removed for the users safety. In addition, the external and internal surfaces are hair-line brush anodized aluminum and it has a tool-less design. The motherboard is positioned on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the button of the case is cooled with fresh cool air directly from the outside of the case, instead of pre-heated air from within. This will bring down the core temperatures and extend the lifespan of the PSU significantly. The chassis is equipped with 8 PCI slots and can hold three or more graphics cards, it supports CrossfireX and 3-way SLI. The PC-60FN is also equipped with large cooling fans, with low RPM, which provide enough air flow to cool down the hardware. The front 140mm intakes blue LED fan runs at 1000RPM and the rear 120mm fan extracts the hot air at 1200RPM. The new HDD cage uses special Thumb Screws with rubber suspension, no tool required, simply secure the anti-vibration rubber ring to the HDD and slide the HDD into the cage. The new 5.25 bay tool-less mounting incorporates a mounting bar equipped with rubber padding that both secures and absorbs vibration from the device once the mounting bar is closed. The Power Supply also has rubber pads for both insulation and support. This chassis supports liquid cooling, the two holes at the rear of the case allow water tubes to pass through, and the rubber cover can protect the tubes from being cut. The PC-60FN chassis has 5x 5.25" drive bays, 4x 3.5" drive bays, 2x USB2.0 ports and HD+AC97 Audio.