Nissan Brake And Clutch | Best Prices in Australia | GetPrice
Showing 1 - 3 of 3 results for

Nissan Brake And Clutch

Sort:
  1. Front Hand Brake Cable suitable for Nissan Patrol GU Wagon Genuine 36402-VB201Front Hand Brake Cable for Nissan Patrol GU Wagon GenuineThis is a new genuine Nissan hand brake cable / park brake cable It is the upper or front cable that connects to the hand brake handle / lever and goes down to rear bracket Suits Nissan Patrol, GU wagon, from 1997 to 2015, except between 04/2001 and 08/2004 The difference between this cable and the other cable we keep (36402-VC210), is the plate which bolts to the floor This cable has 2x mounting holes, where the other has 4x mounting holes Refer images Please check your mounting bracket before ordering Please note this cable does not suit utes Part number for reference: 36402-VB201 36402-VB201 Front Hand Brake Cable suitable for Nissan Patrol GU Wagon Genuine 36402-VB201
    + Shipping
  2. Lower Handbrake Cable for Nissan Patrol GU Y61 Wagon or Ute Genuine 36530-VB30AThis part is a new Genuine Nissan lower handbrake cable Suits GU / Y61 Nissan Patrol wagon and ute fitted with a transmission park brake This is the lower cable which fits between the equalizer lever and the brake drum This cable suits vehicles fitted with the ZD30 series 3.0 litre 4 cylinder turbo diesel built from 8/2004 onwards As there are several different cables fitted to the GU, it is best to email or phone us with your VIN to ensure correct fitment Part number for reference: 36530-VB30A Part number for cross reference: 36530-VB300 36530-VB30A 36530-VB300 36530VB30A 36530VB300 Lower Handbrake Cable for Nissan Patrol GU Y61 Wagon or Ute Genuine 36530-VB30A
    + Shipping: $17.00
  3. Front Hand Brake Cable for Nissan Patrol GU Wagon & Ute GenuineThis is a new genuine Nissan hand brake cable / park brake cable It is the upper or front cable that connects to the hand brake handle / lever Suits Nissan Patrol, GU wagons, built between 04/2001 and 08/2004 It also suits GU utes, built 04/2001 to current The difference between this cable and the other cable we keep (36402-VB201), is the plate which bolts to the floor This cable has 4x mounting holes, where the other has 2x mounting holes Refer images Please check your mounting bracket before ordering Part number for reference: 36402-VC210 36402-VC210 Front Hand Brake Cable for Nissan Patrol GU Wagon & Ute Genuine 36402-VC210
    + Shipping
More results from our partners
  1. Description: Simple installation, no installation instructions. Mainly used for conversion before the two-disc. (It's suitable for most hydraulic brake System.) Specification: Length: 44mm Height: 17mm Width: 40mm Material Type: Aluminum Alloy Special Features: Brake Hose Adapter Material: Aluminum alloy (three code) Product Color: Red/Black/Purple/Orange Applicable Models: General purpose Packing Included: 1 X Three-way Oil Pipe Bracket 3 X Gaskets 3 X Screws
    FREE shipping
  2. Description: Motorcycle handlebar/brake/clutch reservoir mount kit with 2x 1Ball Handlebar Mount Kit with Double 1'' inch ball x 1 The combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Specification: Material: Powder coated marine grade aluminum Ball Size: 1 Rubber Ball Color: Black Note: Please allow 1-3CM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Package Included: 1 X Set Motorcycle Handlebar Mount Kit Accessories are included
    FREE shipping
  3. Specification: Product name: Clutch Brake Throttle Cable Set Color: Black & Silver 2 Clutch/ Brake cables. Approximate length of the inner cable is 60'' inches. 1 Throttle cable. Approximate length of the inner cable is 54'' inches. Length of the clutch cable, black outer which can be cut to length. Complete with end caps and nipples. Fitment: Most motorcycle For Husqvarna for HONDA for SUZUKI for YAMAHA for KAWASAKI etc Note: 1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm) 3. Instruction is not included,professional installation is highly recommended Package Included: 2 X Clutch Brake Cables 1 X Throttle Cable 1 X Black Outer Cable
    FREE shipping
  4. 1 Inch 25mm Motorcycle Handlebar Hydraulic Brake Clutch Lever Master Cylinder Specification: Material : Aluminum alloy Color: Black Type: Left & Right Size: Fits 1 / 25mm Handlebars Mirror thread: 10mm / 0.39 Bore size: 14mm / 0.55 Banjo Bolt Size: 10mm / 0.39 Fitment : Fit for Universal Motorcycle 1 inch Brake Handlebars Note:Please check the size of your old brake clutch lever, ensure this part fit for your motorcycle before purchase. Package included : 1 x Left Clutch Lever 1 x Right Brake Master Cylinder
    FREE shipping
  5. Description: CNC Universal 7/8'' 22mm Front Brake Clutch Master Cylinder Reservoir Levers CNC Machine Anodize Coating Color, Not easy to fade in regular condition. Replaceable lever heads---Easy to install and no modification. Lever & Brake reservoir cap were made of aluminum alloy. Housing is casted aluminum and piston is made of special stainless steel. Specification: Material: T6061-T6 aluminum CNC Machined Banjo Bolt Thread Diameter: 10mm Length: 255mm Width: 112mm Lever Length: 7/8 22mm Position on Bike: Left & Right Handlebar Size: 22mm=7/8 Intended Use: Replacement Part Availiable Color : Black/Silver/Gold/Blue/Red Surface Finish: CNC Machine Anodize Coating Fitment: 7/8 handle bars; only models with hydraulic hydraulic brake and clutch; Fit for 125CC to 600CC Most motorcycle, Sport bike/Street bike/Scooter with 7/8 (22mm) Standard Handle bars. For Yamaha/Ducati/BMW/Honda/Suzuki/Aprilia/Kawasaki/KTM.......... Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Package Included: 1 X Pair Hydraulic Brake Clutch Levers
    FREE shipping
  6. Description: It is durable and convenient. Simple design and easy to use. Specification: Model: SBXLB-004 Color: Black,etc. Material Type: Alloy length: 51mm width: 11mm weight: 45g Model Name: Motorcycle hydraulic brake piston Special Features: Motorcycle hydraulic brake piston Fitment: 11mm Motorcycle hydraulic Clutch & brake pump piston (Please compare) Note: 1. Please check the size if it matches your models before you purchase 2. Pls allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3. No Instructions Included. Professional Installation Is Highly Recommended... Package Included: 1 X Piston 1 X Spring 1 XRetainer 1 X Rubber Caps
    FREE shipping
  7. 22mm Motocross ATV Clutch Handlebar Folding Brake Lever Description Suitable type: Common trick to folding models, including the clutch brake to each one for Motocross ATV modified Specification Color: White common plating, Material: Plating Size: 22MM special handlebar Package Included 1 pair X Motocross Clutch Handlebars
    FREE shipping
  8. Description: Color: chrome Fit for:modified motorcycle Lever Install Instructions: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers Packge include : 1 * Motorcycle modified ox horn
    FREE shipping
  9. Description: Universal standard 7/8 (22mm) and cylinder front brake master cylinder & clutch with adjustable levers and fluid reservoir. Levers are Adjustable. Two Fingers Short Levers. 6 Position lever adjustment stainless steel fasteners. precision machined pivot bore to ensure a perfect fit. stainless steel hardware. Hydraulic and Clutch Brake. Levers are made of aluminium and anodized in the same color as the cap of the brake fluid reservoir. Specification: Color: Black,Blue,Red,Silver,Gold,Green,Orange,Titanium Bore Size : 14mm Material: Levers are made of aluminium and Plastic cap of the brake fluid reservoir Handle Bars, Levers & Mirror Part Type:Levers Placement on Vehicle:Left, Right, Front Fitment: Universal fit on most brand Sport bike / Street bike / Scooter / Dirt Bike with 7/8 (22mm) Standard Handle bar. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Package Included: 1 X Pair Adjustable Brake & Clutch Master Cylinder levers (Left + Right)
    FREE shipping
  10. Specification: Material: Aluminum Alloy Brake Lever Color: Red, grey Size: As picture shown Bore Size: 17mm Banjo Bolt Size: 10mmx1.25mm(Single Hole) Mirror Bracket Holder: M10x1.25 Placement: Left, Right Fitment : Universal for motorcycle with 7/8 inch handlebars Note: 1. Instruction is not included,professional installation is highly recommended. 2. Please check the size measurement chart carefully before making payment. 3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 4. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. Package Included: 1 X Left Clutch Lever 1 X Right Brake Master Cylinder 1 X Pair Brake Switch Wire 1 X Pair Mirror Bracket Holder
    FREE shipping
  11. Universal Car Pedal Manual Brake Gas Clutch Accelerator Pedal Cover Features: 1. 100% brand new and high quality. 2. Non-slip surface design, safe for driving and reduce foot fatigue. 3. Best fitting, easy to install. No modification required. 4. Fine workmanship, the design of individual character and beautiful. 5. Curvature design, to ensure safety. Specification: Material Aluminium Alloy + PVC Color Blue, Red, Black, Yellow Two Small Board Size About 8x7.6cm /3.15x2.9 inches One Big Board About 13.5x 7.5 cm/5.31x2.95 inches. Package weight 220g Note: Due to the different measuring tools and methods, the size of product may be some small difference. Package Include: 1 X Accelerator Pedal 1 X Brake Pedal 1 X Clutch pedal
    FREE shipping
  12. Description: Motorcycle Combination Base for Handlebar or Brake/Clutch Reservoir with 1 Ball Two U-Bolts are supplied to suit tube diameters from 13mm to 32mm and the adjustable centres of the main base body allow mounting on clutch or brake reservoirs with hole centres between 24mm and 40mm. The combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Specification: U-Bolt Dimensions: Accommodates rails from 13mm to 32mm (0.5 to 1.25) in diameter. Material: Powder coated marine grade aluminum Ball Size: 1 Rubber ball B size. Color: Black Package Included: 1 X Aluminum 1'' Ball With Diamond Plate Accessories are included
    FREE shipping
  13. Description: Universal through-hole motorcycle front lever switch. Twist lock type, motorcycle through hole front lever brake light or clutch switch. Suitable for many motorcycle variations from classics bikes to scooters, down to pit bikes, monkey bikes and more. An easy replacement for many brake and clutch lever switches. Keeping you and the road around you lit up has never been more important when out riding, you want to be sure that your electrics work reliably. Here's a durable front brake and clutch lever switch that'll do just the job. A direct replacement for most front brake and clutch lever switches, where the switch is slotted inside a tapered/slotted hole, in the side of the lever housing. Normally Closed Switch: When your lever is out, it depresses the switch - opening the brake light circuit & turning your lights 'off'. When you pull your lever in, it releases the switch - closing the circuit & turning your lights 'on'. Easy to install, simply remove your brake/clutch lever and thread through your new switch. No instructions are required, although some electrical knowledge may be required for connecting up to your electrical circuit. If your bike is due an MOT then it's time to upgrade your lever switches to make your bike safer and more reliable with these high-quality, front lever switches. Specification: Type: Through-hole front lever switch Length of Switch: 26mm Switch Diameter: 8mm Cable Length: 250mm (approx) For use with most front brake and clutch levers Easy to install - no instructions required Package Included: 1 X Front Lever Switch
    FREE shipping
  14. 7/8 Motorcycle Brake Clutch Master Cylinder Galvanized Specifications: Bore Size:17mm Material: Aluminum Color: As the picture show Size:Fits 7/8-inch Handlebars Feature: High quality, easy install, durable Adjustable reach system provides the perfect lever position for all riders Aluminium housing piston is made of special stainless steel Fitment: Fit for Sport bike / Street bike / Scooter / Dirt Bike with 7/8 (22mm) standard handle bar Package Included: 1 x Motorcycle Brake Clutch Lever
    FREE shipping
  15. This gorgeous and glossy clutch works for any occasion and won't let you down this season. Sleek and sophisticated with compartments to carry all that you need, you can hold it comfortably or sling it over your shoulder.
    + Shipping: $10.00
  16. Features: 1. Perfect match for the original car. 2. Fit for FORD TRANSIT MK6 MK7. 3. Stable characteristics, high reliability. 4. Easy installation. Specifications: 1. Color: Black 2. Material: Rubber 3. Size: Approx. 4.8x6.3x1cm/1.89x2.48x0.39 Package Included: 2 X Rubber Pads
    FREE shipping
  17. 7/8 22mm Motorcycle Front Brake Clutch Master Levers Set Reservoir Cylinder Universal Descritpion: Housing is casted aluminium & piston is made of special stainless steel. Levers are made of aluminium and anodized in the same color as the cap of the brake fluid reservoir Levers are Adjustable 7 Colors For Option: Blue,Black,Gold,Green,Orange,Silver,Red Fitment: Universal fitment, fit on most brand Sport bike / Street bike / Scooter / Dirt Bike with 7/8 (22mm) Standard Handle bar Hydraulic Brake Cable Clutch Package Included: 1 X Pair of Motorcycle Brake
    FREE shipping
Back to top

Recently Viewed Brake And Clutch


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.