Oxygen Measuring & Other | Best Prices in Australia | GetPrice
Showing 1 - 19 of 19 results for

Oxygen Measuring & Other

Sort:
  1. Product Features* Measure from pure water to seawater with one meter! COND600 features a broad conductivity range with Auto-ranging Capabilities for more convenience.* More accurate with ±1% full scale accuracy at 3-Decimal resolution.* Mega-memory space that stores/ recalls up to 500 Data Sets with temperature readings, as well as time and date-stamping formatted to meet GLP standards.* Wireless and cable-free data transfer with infrared IrDA technology. Comes with PC-based Complimentary Data Acquisition Software for hassle-free data import and report-generation into any popular spreadsheet programs of your choice.* Even Measures Pure Water with Pure Water Temperature Coefficient Option* Large, easy-to-read custom screen with simultaneous information display allows optimum viewing with user-friendly icons* Hold Function momentarily freezes reading for easy viewing and recording* Self-Diagnostic with message codes for easy troubleshooting* Non-volatile memory and individual password protection keeps settings and stored data safe even when you run out of batteries.* Rugged and Waterproof to IP67 standard with protective rubber boot and handy velcro strap for better grip.* Power with batteries or optional AC adapter for use in the field or at bench-top with built-in stand.* Energy-Saving with Auto-power off feature.* Carrying Kit consists of carrying case with 1 x 1413 µS, 12.88 mS KCL std solutions, 3000 ppm 442 solution and 1 x deionised (rinse) water (60 ml each)ApplicationsIndustrial: For checks in waterconditioning plants, conditioning plants, cooling towers, foodprocessing water testing, printing and chemical industries, andwater/wastewater treatment.Environmental/Agricultural: Use in ecology studies, aquariums, and hydroponics.Educational: Ideal for quick, accurate routine pH checks in laboratories and schools.Specifications: Product Specification Description Conductivity Range .. to 200.0mS Resolution ; Accuracy 0.05% ; ±1% Full Scale + 1 L
    FREE shipping
  2. The STDO11 is a galvanic dissolved Oxygen (DO) probe with a measurement range of 0-200 percent. An advantage of galvanic probes is that they do not need to polarize (warm up) before calibration or measurement unlike polarographic electrodes that take 15 minutes to several hours to warm up.Specifications: - Item Number: 30031639- Connection: BNC- Cable Length: 1.1m- Shaft Length: 120mm- Shaft Diameter: 12mm- Shaft Material: Plastic- Temperature Range: 0-50 C- Measurement Range: 0-200%- Storage Solution: 10% NaCl
    FREE shipping
  3. RZ001 OLED Display Fingertip Pulse Oximeter SpO2 Oxygen Monitor for Healthcare Home Use
    + Shipping
  4. Finger OLED Pulse Oximeter SPO2 PR Portable Blood Oxygen
    + Shipping
  5. DISOLVED OXYGEN METER POCKET TYPE DO5509
    FREE shipping
  6. DISOLVED OXYGEN METER DO5510HA
    FREE shipping
  7. The MO-200 is designed to measure 5 – 100% oxygen while the handheld meter displays and stores measurements. The wide measurement range allows it to be used for applications either in the soil or in the lab with the available diffusion or flow-through heads. The sensor is calibrated to ambient air making it very easy to calibrate. An aluminum housing that is filled with epoxy allows the sensor to withstand harsh conditions.SpecificationsMeasurement Range: 5 to 100 % O2Measurement Repeatability: ± 0.1 % at 20.9 % O2Non-linearity: < 1 % Oxygen Consumption Rate: 2.2 μmol O2 per day at 20.9 % O2 and 23 C Response Time: 14 s (time required to read 90 % of saturated response) Operating Environment: 0 to 50 C, < 90 % non-condensing relative humidity up to 30 C, < 70 % non-condensing relative humidity from 30 to 50 C, 60 to 140 kPa Meter Dimensions: 12.6 cm length, 7.0 cm width, 2.4 cm height Sensor Dimensions: 3.2 cm diameter, 6.8 cm length Mass: 210 g Cable: 2 m of two conductor, shielded, twisted-pair wire
    FREE shipping
  8. The new Myron L Ultrapen PT5 Free Dissolved Oxygen and temperature meter is designed to be extremely accurate, fast and simple to use in diverse water quality applications.A true, one-handed instrument, the PT5is easy to calibrate and easy to use. To take a measurement, you simply press a button then dip the pen in solution. Results display in seconds.Features:• Adjustable for Altitude and Salinity• 3 Calibration Methods: Air, Water and 0 ppm DO• Dynamic Membrane Temperature Correction• Easy to Use - One Button Control• Waterproof• Rugged Design with Aircraft Aluminum Body• Proprietary Sensor DesignSpecifications:• Measurement Range (Dissolved Oxygen): 0 - 20 ppm, DO Saturation 0 - 200%• Accuracy (Dissolved Oxygen): ± 2% of Reading• Repeatability (Dissolved Oxygen): ± 1% of Reading• Resolution (Dissolved Oxygen): 0.01 ppm, DO Saturation 0.1%• Measurement Range (Temperature): 0 - 71 °C or 32 - 160 °F• Temperature Accuracy Displayed: ± 0.1 ºC or ± 0.2 ºF• Resolution (Temperature): 0.1 ºC or ºF• Time to Reading Stabilization: 10 - 180 seconds• Temperature Adjustment for Membrane permeability: Automatic• Altitude Adjustment: -2,000 ft to 15,000 ft: increments of 100 ft• Salinity Adjustment:0 - 50 ppt increments of 1 ppt• Active Mode Power Consumption: 30 - 100 mA• Sleep Mode Power Consumption: 2 μA• Temperature Compensation Method: Automatic to 25 ºC• Physical Dimensions: 17.15 cm L x 1.59 cm D or 6.75 in. L x .625 in. D• Case Material: Anodized Aluminum with UV Protective Coating• Calibration Methods: 1 or 2 Point; 0 ppm DO Calibration Solution and/or air or water• Operating Temperature: DO Saturation: 0 - 60°C / 32 - 140°F: DO Concentration: 0 - 40°C / 32 - 104°F• Storage Temperature: 0 - 55°C / 32 - 131°F• Water Resistance: IP67 and NEMA 6• EN
    FREE shipping
  9. Product Features* User Customisation for user's flexibility like toggling of variousmodes from ppm, mg/l to % saturation, view electrode diagnosis, etc.* Easy Calibration can be performed at 100% and/or 0% and mg/l or ppm against a known solution* Automatic Temperature Compensation (ATC) guarantees the highest accuracy under varying temperature condition * Galvanic Cell allows instantaneous measurements, producing quickresponses and eliminates polarisation; requires minimal maintenance* Automatically Compensates Salinity and Barometric Pressure after manual input for increased accuracy * Hold Function momentarily freezes reading for easy viewing * Auto-Power Off saves battery power after non-use * Self-Diagnostic with message codes for easy troubleshooting* Large Custom LCD provides optimum viewing even at a distance * Protective Rubber Boot shields meter from accidental knocks and features a sturdy built-in stand for easy bench-top operation* Rugged Carrying Case (Optional) provides handy on-site meter calibration and measurementApplicationsAquaculture: Use to monitor oxygenlevels in catfish and shrimp farming; game stocking ponds; ornamentalfish tanks and ponds; and in other fish farming applications.Industrial: Ideal for checks thequality of plant water intake and discharge, wastewater and watertreatment, recirculating systems and industrial process systems.Environmental: Use to test water quality, monitor health of aquatic ecosystems, survey surface and ground water drinking supplies.Educational: Ideal for quick, accurate DO readings in laboratories and schools.Specifications Product Specification Description Dissolved Oxygen Range 0 to 20.00 mg/l or ppm Resolution ; Accuracy 0.01 mg/l or 0.01 ppm ; ±1.5% Full Scale % Saturation of Oxygen 0.0 to 200/0 % Resolution ; Accuracy 0.1% ; ±1.5% Full Scale Temperature Range 0.0 to 50.0 °C Resolution ; Accuracy 0.1 °C ; ± 0.3 °C Salinity Correction 0.0 to 50.0 ppt Barometric Pressure Corr
    FREE shipping
  10. Simple to use, low cost, Dissolved Oxygen meter. Manual calibration Fast Processor with New Chipset and Motherboard 100% Larger ; Easier To Read LED Display Small, Ergonomic ; Light Case Design Easy ; Fast to calibrate Long battery life Open Air Calibration Procedure Specifications Range (ppm / mg/L) 0.0 - 19.0 mg/L Resolution 0.1 (ppm / mg/L) Accuracy ± 1.5% Full Scale ATC Not Available Calibration 2 Points - Manual Environment 32 - 122F Battery Type 9v Alkaline - Included
    FREE shipping
  11. Features:• Display dissolved oxygen in % saturation or mg/L .• Automatic barometric pressure compensation with 1 point calibration.• Displays pressure in user-selectable units (mmHg, inHg, atm, psi, kPa, mbar).• Automatic temperature compensation with one or two point temperature calibration.• Displays temperature in °C or °F.• Manual salinity compensation with a selectable salinity value.• Determination of Biochemical Oxygen Demand (BOD), Oxygen Uptake Rate (OUR) and Specific Oxygen Uptake Rate (SOUR).• Automatic polarization of polarographic probe at startup to ensure that the probe is ready to use when measurement screen is displayed.• Ready-to-use field replaceable PTFE membrane caps.• Log-on-demand: Store measurement data at the press of a button.• GLP data provides calibration data including date, time, pressure, calibrated value, temperature and salinity value of the last calibration.• Contextual help at the press of a button.• Backlit, Graphic LCD.Specifications:• DO Range: 0.00 to 50.00 ppm (mg/L); 0.0 to 600.0% saturation• DO Resolution: 0.01 ppm (mg/L); 0.1% saturation• DO Accuracy: ±1.5% of reading ±1 digit• DO Calibration: Automatic one or two point at 100% saturation (8.26 mg/L) and 0% saturation (0 mg/L).• Atmospheric Pressure Range: 450 to 850 mmHg• Atmospheric Pressure Resolution: 1 mmHg• Atmospheric Pressure Accuracy: ± 3 mmHg within ±15% from the calibration point• Atmospheric Pressure Calibration: One point at any in range pressure value• Temperature Range: -20.0 to 120.0°C (-4.0 to 248.0°F)• Temperature Resolution: 0.1°C (0.1°F)• Temperature Accuracy: ±0.2°C; ±0.4°F (excluding probe error)• Temperature Calibration: One or two point at any in range temperature value• Temperature Compensation: Automatic from 0 to 50°C (32 to 122°F)• M
    FREE shipping
  12. Features:• Bluetooth® data downloading• User programmable process alarm thresholds• Large display shows Oxygen ; Carbon Dioxide in real time• Accurate, rapid response Zirconia O2 sensor: 1ppm to 100%• Sturdy non-dispersive Infrared CO2 sensor, 0 to 100%• Very low maintenance• Internal storage for 3680 samples• 4x field programmable output relays• 2x fully isolated range programmable 4-20mA outputsSpecifications: Oxygen Measurement Oxygen Range 1 part per million (ppm) to 100% Oxygen Response Time <4 seconds with gas flow of 100cc per minute Oxygen Accuracy ±1% of actual measured value ±0.5% repeatability measured value Oxygen Display Resolution 30.0 to 100% ±0.1% 1.00 to 29.99% ±0.01% 100 to 10,000ppm ±1ppm 0.1 to 99.9ppm ±0.1ppm CO2 Measurement CO2 Range 0 to 100% CO2 Response Time <8 seconds with gas flow of 100cc per minute CO2 Accuracy 0 to 40% ±2% 40 to 80% ±3% 80 to 100% ±5% Other Specifications Gas Connection 1/8\" Swagelok tube connection Communications BlueTooth® Wireless Analog Outputs (for continuous sampling mode only) Two isolated, linearised 4-20mA DC, 1000ohm max Four user programmable alarm relays Alarm Relays (for continuous sampling mode only) 4 isolated programmable, failsafe (active open) 2A/240VAC, 2A/30VDC Environmental Rating Without CO20 to 50°C (32 to 120°F) With CO20 to 45°C (32 to 110°F) Relative Humidity5% to 95% (non-condensing)
    FREE shipping
  13. Features:• Easy-to-use pocket dissolved oxygen meter comes with a polarographic sensor.• 1 or 2 points calibration using air-saturated water and zero oxygen solution.• Manual salinity and barometric pressure compensation improve the measurement accuracy.• Automatic Temperature Compensation ensures accurate reading over the entire range.• Auto-Hold function freezes stable measured value for easy viewing and recording.• Battery indicator shows the remaining battery capacity.• Auto-Power Off helps user effectively conserve battery life.• System menu allows setting the 6 parameters, including the number of calibration points, temperature unit, concentration unit, hold function, etc.• Reset feature automatically resumes all parameters back to factory default options.• Replaceable electrode module reduces maintenance and replacement cost.• Waterproof feature to ensure complete protection in harsh environments.Specifications:• Dissolved Oxygen Range: 0.0~20.0mg/L (or ppm)• Dissolved Oxygen Accuracy: ±0.5mg/L• Resolution: 0.1mg/L• % Saturation of Oxygen Range: 0.0~200.0%• % Saturation of Oxygen Accuracy: ±10% F.S• Resolution: 0.1%• Temperature Compensation: 0~40°C, 32~104°F• Barometric Pressure Correction: 60.0~112.5kPa, 450~850mmHg• Salinity Correction: 0~35g/L• Hold Function: Manual or Automatic• Power Off: Manual or Automatic• Reset Function: Yes• Sensor Type: DO100 Polarographic DO Probe• Connector: 6-pin• Power Requirements: 2×1.5V \"AAA\" Batteries
    FREE shipping
  14. Product Features* Measures oxygen concentration up to 90.00mg/L and Saturation up to 600.0% – one of the widest measurement range in the DO handheld market today!* Mega-storage space saves up to 500 data sets stamped with time and date – Perfect for GLP-compliant researches* Salinity, temperature and pressure compensation – accurate even under varying conditions* Comprehensive one-glance-tells-all screen with intelligent screen prompts.* Cal-due alarm on real-time clock ensures periodic calibration updates.* IP67 waterproof design for applications in harsh environments* Auto-logging function automatically records up to 500 data sets stamped with date and time–Great for GLP-compliant researches* LED-RS232 and IrDA Wireless Communication for direct Meter-to-PC data transfer.* Convenient 2-point calibration with step-by-step calibration guide.* Galvanic, so you don't have to wait for meter to warm up.ApplicationsRoutine Testing: For quick, accurate dissolved oxygenchecks in laboratories, field and schools. Useful in aquaculture andaquariums.Industrial: Biological Wastewater Treatment; Fermentation Water Quality Testing: Environmental monitoringSpecifications: Product Specification Description Dissolved Oxygen Range: 0.00 to 90.00 mg/L or ppm Resolution: 0.01 mg/L or ppm Accuracy: ±0.2 mg/L % Saturation Range: 0.0 to 600.0% Resolution: 0.1% Accuracy: ±2 % Temperature Range: 0.0 to 50.0 °C (32 to 122 °F) Resolution: 0.1 °C (0.1 °F) Accuracy: ±0.3 °C (±0.5 °F) Compensation: ATC / MTC (0.0 to 50 °C) Salinity Correction Range: 0.0 to 50.0 ppt Resolution: 0.1 ppt Method: Automatic correction after manual input Pressure Correction Range: 450 to 825mmHg (59.9 to 109.9 kPa) Resolution: 1 mmHg (0.1 kPa) Method: Automatic correction with inbuilt sensor Calibration 2 Point (0% , 100%) Operating Range 0.0 to 50.0 °C (32 to 122 °F) Probe Type Galvanic Date/Time Stamping Yes Memory 500 data sets (
    FREE shipping
  15. 1IC-Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications.Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation.The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input.Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button.No need for chemical solutions! A HOLD button allows the user to freeze the reading on the LCD.The low battery indicator and the easy to replace screw on cap membranes make the 1IC-Mi605 a compact instrument and ideal for all applications: aquaculture, wastewater, environmental and educational.1IC-Mi605 is supplied complete in a hard carryingcase complete with aD.O. probe, sparemembranes, calibrationsolutions,battery and instructions.1IC-Mi605 is supplied complete with MA840 polarographicD.O. probe with 3 meters cable, 2 spare membranes,20 mL bottle of electrolyte solution, rugged carrying case,9V battery and instructions. Specifications 1IC-MI605 Range O2 Range % Saturation O2 Range Temp 0.0 to 45.00 mg/L (ppm) 0.0 to 300% 0.0 to 50.0°C / 32 to 122°F Resolution O2 Resolution % Resolution Temp 0.01 mg/L (ppm) Saturation O2 0.1% 0.1°C Accuracy O2(@25°C) Accuracy % Saturation O2(@25°C) Accuracy Temp(@25°C) ±1.5% Full Scale ±1.5% Full Scale ±0.5°C Typical EMC DeviationO2 Typical EMCDeviation% Saturation O2 Typical EMCDeviationTemp ±0.3 mg/L (ppm) ±3.5% ±0.5°C Calibration Automatic in saturated air Temperature Compensation Automatic, from 0 to 50°C / 32 to 122°F Altitude Compensation 0 to 4000 m; 100 m resolution Salinity Compensation 0 to 80 g/L; 1 g/L resolution Probe MA840 (included) Environment
    FREE shipping
  16. Rugged, reliable, accurate • Shockproof • IP67 Waterproof • Floats • Rechargeable Lithium-Ion battery • Protective soft-grip outer layer AquaShock® meters have been designed and tested to ensure accurate, reliable water quality measurement under any conditions. Results are easy to read, in any light, on the large LED backlit display. Powered by a long-lasting, environmentally friendly, rechargeable Lithium-Ion battery. AquaShock® meters are very intuitive and include all the functions you will likely ever need, including: review of 99 memories (min/max/ave) directly on the meter’s display, internal clock and calendar, temperature in °C or °F, auto-ranging, automatic and manual temperature compensation, and hold. • Measures DO (Dissolved Oxygen) in either % saturation, ppm or mg/L. • Accepts corrections for salinity and barometric pressure. • Automatic calibration to air. • Recalls slope and last calibration. Includes AquaShock® DO Meter; AC adaptor; manual; warranty card; probe input covers; ATC DO probe with3 m cable (6 month warranty on the probe); protective, foam-lined, hard-shell carrying case. AquaShock® is virtually unbreakable, eliminating the inconvenience of frequent instrument repair or replacement for at least 5 years of interrupted, accurate, reliable use. Dimensions:Meter: 197 × 95 × 70 mmMeter Weight: 454 gKit Dimensions: 343 × 286 × 76 mmSpecifications: Mode mg/L(ppm) % Saturation Temperature Range 0.00 ~19.99 mg/L (ppm) 0.0 ~199.9% 0.0 ~ 50.0°C 32.0 ~ 122.0°F Resolution 0.01 mg/L (ppm) 0.1% 0.1°C or 0.1°F Accuracy ±1.0% Full Scale ±1.0% Full Scale ±0.5°C or ±0.9°F
    FREE shipping
  17. This Digital Oxygen Meter is supplied with a polarographic type probe with an incorporated temp. sensor which serves for precision Dissolved Oxygen(DO), Oxygen in air(O 2), Temp measurement. Applications for Aquarium, Medical research, Agriculture, Fish hatcheries, Laboratory, Water conditioning, Mining industrial, Schools ; Colleges, Quality control...
    FREE shipping
  18. Features: - The 9030M measures dissolved oxygen in water using optical technology - Simultaneous display of dissolved oxygen and temperature measurements- Easy to use user interfaces- 50 data set of reviewable memory- Automatic temperature compensated (ATC) dissolved oxygen readings- User selectable salinity and pressure compensated dissolved oxygen readings- IP65 waterproof housing- Automatic shutoff function- Low battery indicator- RoHS and CE compliantSpecifications: - DO Range (PPM): 0.00 to 20.00 mg/L- DO Resolution (PPM): 0.01 mg/L- DO Accuracy (PPM): +-1.5 % of reading or +-1.5 mg/L, whichever is greater- DO Range (%): 0.0 to 200.0 %- DO Resolution (%): 0.1 %- DO Accuracy (%): +- 1.5 % of reading or +- 1.5 % air saturation, whichever is greater- Temperature Range: 0.0 to 50.0 +- C- Temperature Resolution: 0.1 +- C- Temperature Accuracy: +- 0.3 +- C- Pressure Compensation: 500 to 1125 mBar- Salinity Compensation: 0.0 to 40.0 ppt- Type of Electrode: Optical- Calibration backup: yes- Automatic Temperature Compensation: yes- Power: 9V Alkaline battery- Operating Ambient Condition: 0 to 50 C at 90 % RH
    FREE shipping
  19. FS20A Finger Pulse Oximeter OLED Display Portable Blood Oxygen Saturation Monitor
    + Shipping
    (25% Off)
Back to top

Recently Viewed Measuring & Other


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.