Paints & Coatings power commander 5 | Best Prices in Australia | GetPrice
Showing 1 - 19 of 19 results for

Paints & Coatings power commander 5

Sort:
  1. PEN-E-SEAL Concrete, bricks and natural stone are versatile cost effective construction materials with a serious defect, they are porous. Water and water soluble contaminants can be readily absorbed initiating a process of deterioration, starting with efflorescence, salt damage, mould and mildew, corrosion of steel reinforcing and eventually erosion of the surface. This is all preventable with the use of Impregnating Sealers, Penetrating Sealers and Surface Sealers, all of which are designed to protect, beautify and enhance the structure whether it is a residence, monument, block of units or a bridge. Sealers will extend the life of these structures and add value as they age beautifully instead of crumbling with erosion Features of Pen-E-Seal: � Seals Concrete, Terracotta, Unglazed Tiles, Pavers, Sandstone and other natural rock against water damage. � Eliminates the occurrence of Efflorescence. � Reduces Moss, mould and algae growth. � Reduces corrosion attack on steel reinforcing. � Retains a natural look. � Breathable, allows water vapour to escape. � Deep penetrating. � Alkali resistant. � Pen-E-Seal will last up to 10 years or longer dependant on application and weather conditions. � Water based, non flammable. � No odour. � Non film forming, will not flake or peel. How Pen-E-Seal Works: Pen-E-Seal works by chemically reacting with the concrete or rock using nano-technology developed to create a protective barrier to water. The active component is a molecule consisting of silicon, carbon, hydrogen and oxygen atoms. The molecule has two ends, one hydrophilic the other hydrophobic. When applied, the hydrophilic end reacts with moisture retained in the substrate and breaks away to form another compound that reacts within the masonry lattice. This reaction forms a bond that is stronger than any mechanical or hydrogen bonding of conventional film forming sealers, the exposed hydrophobic end of the molecule changes the surface energy with the result that water is now
    + Shipping
  2. PENETRATING STAIN PROOF SEALER Concrete, bricks and natural stone are versatile cost effective construction materials with a serious defect, they are porous. Water and water soluble contaminants can be readily absorbed initiating a process of deterioration, starting with efflorescence, salt damage, mould and mildew, corrosion of steel reinforcing and eventually erosion of the surface. This is all preventable with the use of Impregnating Sealers, Penetrating Sealers and Surface Sealers, all of which are designed to protect, beautify and enhance the structure whether it is a residence, monument, block of units or a bridge. Sealers will extend the life of these structures and add value as they age beautifully instead of crumbling with erosion. Photograph showing the effect of water droplets on a paver. Only the bottom half was treated with Penetrating Stain Proof Sealer, the top left natural. The paver was then placed in a tray of water, and water was dropped onto the treated and untreated surfaces. The water is prevented from penetrating the surface and from absorbing into the paver by Penetrating Sealer. ---------------------------------------------------------------------------------------------------------------------------------- The top half is darkened by water absorption and the droplets adsorbed immediately. ---------------------------------------------------------------------------------------------------------------- Features of Penetrating Stain Proof Sealer ��������� Seals Concrete, Terracotta, Unglazed Tiles, Pavers, Sandstone and other natural rock against water damage and staining. � Protects against permanent staining from oil, grease, food, red wine, graffiti and posters Can be applied to damp stone Coverage - Approx 7sq.m per Litre ��������� Eliminates the occurrence of Efflorescence. ��������� Reduces Moss, mould and algae growth. ��������� Reduces corrosion attack on steel reinforcing. ��������� Retains a natural look. ��������� Breathable, allows
    + Shipping
  3. An industrial strength degreaser and cleaner. EVO-POWERCLEAN offers effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue and the surface is ready for painting. Suitable for general cleaning of brick, tiles or stone, urban furniture, ornamental structures, historical monuments, public buildings and new or old constructions affected by pollution as well as ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon and grease traps. It does not attack the surface treated and replaces aggressive acid and basic cleaners. Packaging: 2L, 5L & 20L Containers PRODUCT DESCRIPTION: EVO-POWERCLEAN is an industrial strength degreaser and general purpose cleaner specially formulated for commercial and residential use. Its a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, and allows effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue-surface is ready for painting. APPLICATION FIELDS: General removal of pollution stains and dirt from solid and fluid fuels, road traffic, industrial environment, etc., on brick, tiles or stone, urban furniture, ornamental structures and constructive elements at both urban and industrial areas. Cleaning of historical monuments, public buildings and new or old constructions affected by pollution. Ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon, grease traps. ADVANTAGES: It does not attack the surface treated. Dissolves coal deposits from combustion processes, removing them. Safe for users and adjacent areas, it does not require special protection equipments. Non-corrosive and non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and
    + Shipping
  4. An industrial strength degreaser and cleaner. EVO-POWERCLEAN offers effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue and the surface is ready for painting. Suitable for general cleaning of brick, tiles or stone, urban furniture, ornamental structures, historical monuments, public buildings and new or old constructions affected by pollution as well as ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon and grease traps. It does not attack the surface treated and replaces aggressive acid and basic cleaners. Packaging: 2L, 5L & 20L Containers PRODUCT DESCRIPTION: EVO-POWERCLEAN is an industrial strength degreaser and general purpose cleaner specially formulated for commercial and residential use. Its a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, and allows effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue-surface is ready for painting. APPLICATION FIELDS: General removal of pollution stains and dirt from solid and fluid fuels, road traffic, industrial environment, etc., on brick, tiles or stone, urban furniture, ornamental structures and constructive elements at both urban and industrial areas. Cleaning of historical monuments, public buildings and new or old constructions affected by pollution. Ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon, grease traps. ADVANTAGES: It does not attack the surface treated. Dissolves coal deposits from combustion processes, removing them. Safe for users and adjacent areas, it does not require special protection equipments. Non-corrosive and non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and
    + Shipping
  5. An industrial strength degreaser and cleaner. EVO-POWERCLEAN offers effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue and the surface is ready for painting. Suitable for general cleaning of brick, tiles or stone, urban furniture, ornamental structures, historical monuments, public buildings and new or old constructions affected by pollution as well as ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon and grease traps. It does not attack the surface treated and replaces aggressive acid and basic cleaners. Packaging: 2L, 5L & 20L Containers PRODUCT DESCRIPTION: EVO-POWERCLEAN is an industrial strength degreaser and general purpose cleaner specially formulated for commercial and residential use. Its a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, and allows effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue-surface is ready for painting. APPLICATION FIELDS: General removal of pollution stains and dirt from solid and fluid fuels, road traffic, industrial environment, etc., on brick, tiles or stone, urban furniture, ornamental structures and constructive elements at both urban and industrial areas. Cleaning of historical monuments, public buildings and new or old constructions affected by pollution. Ramps, engine rooms, parts, oil stained concrete, barges, fireplace carbon, grease traps. ADVANTAGES: It does not attack the surface treated. Dissolves coal deposits from combustion processes, removing them. Safe for users and adjacent areas, it does not require special protection equipments. Non-corrosive and non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and
    + Shipping
  6. Graffiti Brick Stripper is a blend of strong, non flammable solvents to lift paints off bricks and concrete Graffiti Brick Stripper is applied to affected areas with a brush or cloth. After several minutes another application should be made. The graffiti can then be power washed off the surface. A third application may be required for some paints Graffiti Brick Stripper is for use on brick or concrete surfaces only, as it will affect painted surfaces if left in contact for more than several minutes Some caution must be exercised as Graffiti Brick Stripper will attack plastic surfaces and cannot be left for more than 30 seconds. Advantages: �� Non Flammable � Low odour Please Note: This data sheet is to provide information on the product based on current knowledge. It does not constitute a guarantee and we recommend that testing should be undertaken to ensure that the final result is satisfactory for the intended application. The quality of the product is guaranteed under our General Conditions of Sale.
    + Shipping
  7. Gum Remover is a blend of selected solvents and surfactants designed to lift wads of chewing gum off fabric and hard surfaces. Can be used as a stand alone product or as a pretreatment prior to steam cleaning or pressure cleaning. Gum Remover should be poured on to the wad of gum to thoroughly wet the area and allowed to work for 10-15 minutes. Then using a spatula or knife carefully lift the gum off the surface and scrape any residue away. If the gum is old and dry it is advisable to scuff or scratch the surface of the gum with a steel scourer or wire brush before pouring the Gum Remover on. This will allow the gum remover to soften the gum quicker. Care needs to be used here if the gum is on a fabric surface not to touch the fabric with the brush or scourer. Wipe or dab with cloth to dry the excess solvent. Eco Scrubber Solution can be misted over the area and wiped with a clean cloth to give a final clean if required. When Gum Remover is used as a pretreatment spotter for gum removal it is not necessary to scrape the soften wad off the surface, the action of the steam carpet cleaner or pressure wand will be sufficient. �
    + Shipping
  8. Graffiti Solvent Remover is a blend of strong solvents to lift stubborn stains left from marking pens that are not removed by Graffiti GEM Remover. Graffiti Solvent Remover is selectively applied to affected areas with a cloth and a rubbing action. Some caution must be exercised in the use as it will attack some plastic surfaces and cannot be left for more than 60 seconds before removing. Eco Scrubber Solution is then used to neutralize the effect of Graffiti Solvent Remover and clean the surface to leave it free from dirt, chemicals and graffiti Graffiti Coating should then be applied to enable easy removal of future graffiti attacks Advantages: Non Flammable Low odour
    + Shipping
  9. Eco Stripper is an effective, friendly, industrial strength stripper designed to remove water based and solvent-based sealers and paint off concrete. Eco Stripper will also remove several layers of paint off drums and varnishes and urethanes from timber furniture and flooring without the need to sand, making it a versatile easy to use product. Eco Stripper has low toxicity with high solvency and compares in performance to Methylene Chloride based strippers without the carcinogenic problems, allowing you to work indoors or outdoors without the odour of the more traditional strippers. Eco Stripper will remove water-based coatings and epoxy coatings off concrete where Methylene Chloride Strippers fail. Features � Low Odour � Low Toxicity � Non Carcinogenic � Water soluble and water rinseable � Non-Caustic � pH neutral � Non-Hazardous � Low Evaporation rate � Gelled for performance Application Spread on surface with squeegee, brush or spray to a uniform thickness, the type of coating and layers will determine the time it will take Eco Stripper to work. Allow the Eco Stripper to work and check its progress with a scraper, epoxy coatings will take up to 12 hours to lift off. When ready, the coating can be removed with a scraper and the residue washed off with water, concrete should be power washed to a clean surface. Laboratory testing shows that up to 10 times more of a Methylene Chloride based stripper will be applied to give the same result as Eco Stripper, as the Eco Stripper can be rolled on in a very thin film and will still be as effective at the low application weight. Eco Stripper is safe to use on concrete, bricks, stone, metals and wood on vertical and horizontal surfaces. Do not use on plastic and PVC surfaces and if used on fiberglass dulling may occur and damage may be evident over prolonged periods in excess of 12 hours. Coverage = Approx 10sq.m / Litre
    + Shipping
  10. Penetrating Sealer enhance is a specifically formulated water based penetrating sealer designed to slightly darken and highlight the character and beauty of Coloured Concrete, Unsealed Concrete, Polished Concrete, Granite, Marble, Slate and other natural stone products. Penetrating Sealer�Enhance leaves a �slight wet look� appearance without altering the surface characteristics whilst providing excellent water and stain protection. The colour change is slight, if a greater change is required use Enhance AE300. Coverage - Approx 7sq.m per Litre �Applying : �� 2 coat product � Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated. � The surface must be clean but can be damp. � A damping spray of water on concrete and porous substrates prior to coating improves the penetration and increases the stain protection on these surfaces � Apply liberal coating of Penetrating Sealer�Enhance using brush, roller or low pressure spray � Leave for 20 minutes then reapply a second coat whilst still wet Leave the coating to penetrate the surface for 5-30minutes, required colour is dependent on time / penetration � Wipe off excess with clean cloth prior to the Sealer�Enhance fully drying. � Do not allow excess to fully dry on the surface as it may result in a residue that will need to be mechanically removed.
    + Shipping
  11. EVO-SEAL is an advanced U.V. stable penetrating colourless, inorganic polyester / polymer liquid. It is NOT a surface coating. It waterproofs, insulates, hardens and preserves concrete, plaster, mortar and most natural stone permanently. Suitable for all old or new concrete, bricks, blocks, plastering, render, masonry construction, concrete floors, walls, terrazzo and most natural stone (above or below ground). EVO-SEAL is suitable for roads, tunnels, decks, dams, subways, basements, swimming pools and for potable water applications. It will not harm glass, tiles or aluminium and prevents saponification of paints and provides a suitable surface for paint or floor coverings. Packaging: 2L, 5L&20L Containers. EVO-SEAL- Penetrates up to 100mm. Transparent, water based static/hydrostatic waterproof liquid impregnate tested to 4 bar (60psi). Non toxic, non-caustic, non-flammable, inorganic polyester polymer formulation. Waterproofs, eliminates rising damp, insulates, hardens and preserves concrete, plaster, mortar and most natural stone permanently. Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, brick fretting, cracking, seepage as it increases the density of the substrate, increases wear capability. APPLICATION FIELDS: All old or new concrete, bricks, blocks, plastering/render and masonry construction. Concrete floors, walls, terrazzo and most natural stone. Above or below ground. Historical monuments, public buildings and new or old constructions affected by pollution. Roads, tunnels, decks, dams, subways, basements, swimming pools. ADVANTAGES: Suitable over weak and old substrates. Prevents saponification of paints, does not contain oils or solvents. Prevents blistering. Safe for users and adjacent areas, it does not require special protection equipment. Non-corrosive, non-toxic and non-flam
    + Shipping
  12. Earth friendly waterproofing and preservation system based on advanced acrylic polyester polymer technology. BLOCKSEAL is a U.V. stable, penetrating inorganic transparent liquid that out-performs all aliphatic solutions. It is NOT a surface coating and its special formulation is ideal for all old or new concrete blocks, masonry used in block wall construction which are highly porous. Insulate, harden and preserve concrete blocks permanently and creates a problem-free bond for paint. Suitable over weak and old substrates and prevents saponification of paints. Will not harm glass, tiles oraluminium. Packaging: 5L & 20L Containers EVO-BLOCKSEAL EARTH FRIENDLY WATERPROOFING SYSTEM BASED ON ADVANCED ACRYLIC POLYESTER POLYMER TECHNOLOGY DESCRIPTION: EVO-BLOCKSEAL- Penetrating up to 100mm, inorganic transparent water based impregnate. Outperforming all silane and standard acrylic solutions. Negative pressure to 4 Bar (60 psi). Non toxic, non-caustic, non-flammable, polyester polymer formulation. Waterproofs, insulates, hardens and preserves concrete blocks permanently. Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, cracking, seepage as it increases the density of the substrate, increases wear capability. APPLICATION FIELDS: All old or new concrete blocks, masonry used in Block wall construction. ADVANTAGES: Suitable over weak and old substrates. 50 to100mm masonry penetrating saturant. Prevents saponification of paints, does not contain oils or solvents. Prevents efflorescence. Safe for users and adjacent areas, it does not require special protection equipments. Non-corrosive, non-toxic and non-flammable. Environmentally friendly. Saves hazardous classified materials transportation cost. Problem free bond for paint. Can be rendered or painted. Will not harm glass, tiles or aluminium. Permanently
    + Shipping
  13. Earth friendly waterproofing system based on advanced polyester/polymer urethane technology. TRAFFICSEAL is a penetrating colourless, inorganic transparent liquid. It leaves a polyurethane film that will provide a durable permanent surface finish suitable for traffic and wear that resists chlorides and chemicals and is U.V. stable. It waterproofs, insulates, hardens and preserves concrete, wear slabs, payers and most natural stone permanently. Ideal for all old or new concrete areas subject to traffic such as roads, tunnels, decks, driveways, basements, car parks and pool surrounds. Will not harm glass, tiles or aluminium and will resist chlorine stain. Packaging: 5L&20L Containers. PRODUCT DESCRIPTION: EVO-TRAFFICSEAL - penetrating up to 100mm colourless, negative pressure to 4 Bar transparent liquid impregnate – topical UV stable polyurethane surface film, Will provide a tough durable surface finish suitable for concrete slabs with vehicular traffic. NON-TOXIC, non-caustic, non-flammable, inorganic polyester/polymer/urethane formula. It waterproofs, insulates, hardens and preserves concrete, wear slabs, pavers and most natural stone permanently. Causes a chemical reaction that solidifies the component parts of, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, fretting, cracking, seepage as it increases the density of the substrate, increases wear capability. APPLICATION FIELDS: ADVANTAGES: SURFACE PREPARATION: Preparation of the surface Fill all holes and cracks with suitable mortar Clean the surface to be treated to remove dust, grease, salts, or unsound particles and loose or cracked paint, to optimize the penetration of EVO-TRAFFICSEAL. EVO-POWERCLEAN is recommended before application. ALLOW SURFACE TO DRY. APPLICATION: Apply EVO- TRAFFICSEAL by low-pressure spray operating at no more than 20 psi, back-pack or hand-spray, backpack ensuring an uniform and homogeneous coverage
    + Shipping
  14. 100% acrylic industrial strength repair mortar "ADMIX" for better workability and unequalled adhesion to substrate. It enhances strength, durability and adhesion of cement based materials and is suitable for skim coating over old concrete and masonry surfaces, masonry, brick, block structures, walls and sloping floors. Ideal for conventional lightweight renders and coatings, waterproofing systems, patching and repair mortars. It replaces hacking and chicken wire to walls before plastering painted surfaces. Dries quickly and hardens all cement repairs in less than 30 minutes. No degradation or colour development to exterior exposure. Packaging: 2L, 5L & 20L Containers 100% ACRYLIC EMULSION ADDITIVE EVO-BOND DESCRIPTION: EVO-BOND is a 100% ACRYLIC INDUSTRIAL STRENGTH admixture. A longer lasting acrylic composition for adding to cement mixtures for better workability and unequalled render adhesion to non porous surfaces. It is a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals APPLICATION FIELDS: ADVANTAGES: SURFACE PREPARATION: Preparation of the surface Remove all loose material and remove build-up of efflorescence, dust and grime. Brush EVO-BOND onto surface or area to be repaired first to pre-prime If required use EVO-POWERCLEAN COVERAGE: 4.5 litres mixes with 25 kg of sand and cement mixture. Coverage depends on thickness of coat and roughness of surface. APPLICATION: Apply sand/cement mixture as per industry practise. Apply mortar mix while prime coat is still wet. CLEANING: Tools and equipments should be cleaned immediately with water after use. General industrial, commercial and residential. Skim coating over old concrete and masonry surfaces. Masonry, brick, block structures, walls, sloping floors. Not sticky on trowel. Enhances strength, durability and adhesion of cement based materials. Suitable for formulation of conventional lightweight renders and coatings, w
    + Shipping
  15. Penetrating colourless, polyester polymer inorganic liquid that outperforms all SILANE/SILOXANE solutions. It is NOT a surface coating. It is perfect for sealing leaking showers and tiled areas in laundries, bathrooms and other wet areas and all old or new concrete prior to tiling. It permanently waterproofs and preserves and will not harm glass, tiles or aluminium. It is non-toxic and non-caustic and is suitable for potable water applications. Packaging: 2L, 5L & 20L Containers PRODUCT DESCRIPTION: EVO-SHOWERSEAL – penetrates up to 100mm, is an inorganic transparent liquid- outperforming all SILANE/SILOXANE and ACRYLIC solutions. NON-TOXIC, non-caustic, non-flammable, inorganic polyester polymer formulation. It waterproofs, insulates, hardens and preserves permanently. Causes a chemical reaction that solidifies the component parts of the surface into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, cracking, seepage as it increases the density of the substrate, increases wear capability. APPLICATION FIELDS: Leaking showers and tiled areas All old or new concrete prior to tiling. ADVANTAGES: Suitable over weak and old substrates. Safe for users and adjacent areas, it does not require special protection equipments. Non-corrosive, non-toxic and non-flammable. Environmentally friendly. Saves hazardous classified materials transportation cost. Permanently waterproofs and preserves. SURFACE PREPARATION: Preparation of the surface Fill all cracks and missing grout lines. Repair or replace cracked tiles. Clean the surface to be treated to remove algae, mould, dust, grease, salts, soap scum, loose or cracked unsound particles , EVO-POWERCLEAN is recommended to optimize the penetration of EVO- SHOWERSEAL It is critical that missing grout and cracks are repaired prior to sealing Surfaces to be treated must be clean and dry. Allow to dry min. 5 hours. Technical Data Bulletin | MSDS
    + Shipping
  16. EVO-CONCRETECLEAN is a unique industrial strength concentrate fluid degreaser and cleaner especially formulated for industrial, commercial and residential use. Effective cleaning without harmful effects to the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue and restores a "NEW LOOK". Perfect for cleaning of sidewalks, driveways and new or old constructions affected by pollution such as ramps, oil stained concrete, barges, car parks, gas stations, shopping centres.It dissolves coal deposits and replaces aggressive acid and basic cleaners on concrete, brick, tiles or stone. Packaging: 2L, 5L & 20L Containers PRODUCT DESCRIPTION: EVO-CONCRETECLEAN an industrial strength concentrated fluid applied degreaser and cleaner specially formulated for industrial, commercial and residential use. Its special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, allows effective cleaning without harmful effects for the environment and with no changes to the colour, appearance and texture of the substrate. Leaves no residue-restores “NEW LOOK” APPLICATION FIELDS: ADVANTAGES: SURFACE PREPARATION: General removal of pollution stains and dirt from solid and fluid fuels, road traffic, industrial environment, etc., on concrete, brick, tiles or stone constructive elements at both urban and industrial areas. Cleaning of sidewalks, drive ways new or old constructions affected by pollution. Ramps, oil stained concrete, barges, car parks, gas stations, shopping centres. It does not attack the surface treated. Dissolves coal deposits from combustion processes, removing them. Safe for users and adjacent areas, requires only safety goggle, gloves and rubber boots NO special protection equipment. Non-corrosive and non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and basic cl
    + Shipping
  17. a unique industrial strength efflorescence (salt) remover especially formulated for industrial, commercial and residential use. EVO-SALTAWAY allows effective removal of efflorescence without harmful effects to the environment. It is ideal for general removal of efflorescence when cleaning masonry, brick, block structures, walls, floors, historical monuments, public buildings and new or old constructions. It does not attack the surface treated and dissolves efflorescence deposits, allowing removal. It replaces aggressive acid and basic cleaners. Packaging: 2L, 5L&20L Containers PRODUCT DESCRIPTION: EVO-SALTAWAY is an industrial strength efflorescence (SALT) remover specially formulated for industrial, commercial and residential use for concrete and masonry surfaces. Its special non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, allows effective removal of efflorescence from all masonry surfaces without harmful effects for the environment. ADVANTAGES: APPLICATION FIELDS: General removal of efflorescence. Cleaning of historical monuments, public buildings and new or old constructions affected by efflorescence. Masonry, brick, block structures, walls, floors suffering efflorescence. It does not attack the surface treated. Dissolves efflorescence deposits, allowing removal. Safe for users and adjacent areas, it does not require special protection equipments. Non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and basic cleaners. SURFACE PREPARATION: Preparation of the surface Remove all loose material and remove excessive build-up of efflorescence. If required use EVO-POWERCLEAN APPLICATION: APPLY EVO- SALTAWAY by pump spray ensuring a uniform and homogeneous coverage. Apply until “FOAM” begins to appear. Foam only appears when efflorescence is present. Wait 5 minutes, re-apply as required, mechanically agitate and use ze
    + Shipping
  18. DESCRIPTION Waterplug sets quickly while bonding to the surface and expanding to rapidly block the flow of water in a few minutes after application. Use as a permanent patching material above or below grade. Waterplug’s super-fast setting, non-shrink and high-bonding properties make it an excellent mortar for anchoring ornamental iron, bolts, posts and dowels. Waterplug expands slightly to grip the surface of the embedded item and fill every crevice of the concrete cavity. Waterplug can be used as a patching material at temperatures below 0ºC. At these temperatures, any other patching materials are unusable or require expensive and time consuming attention. The catalytic reaction which produces the highly accelerated setting time generates enough heat to assure a secure surface bond. Use Waterplug for below freezing repairs of roadways, bridge decks, cold storage rooms etc. Properly applied, Waterplug will provide permanent, watertight seals that will not corrode or decompose. DIRECTIONS FOR USE Surface Preparation: To assure the strongest bond, surface area must be free of all potential contaminants such as oil, grease, form release agents, dust or other foreign matter. For underwater applications, surface should be free of surface film or algae. Roughen surface area with a wire brush, chisel or other similar instrument. Remove any loose or weakened concrete and mortar. If crack is less than 20mm in width or depth, widen or gouge to this dimension. The best results will be attained if the inner portion of the crack is undercut so that the depth of the crack is wider than the surface opening. This creates an inner cavity that allows Waterplug to expand and resist high water pressure. If the hole or crack is not leaking at the time of the repair, soak area for at least 15 minutes before applying Waterplug. Mixing: Mix Waterplug in a clean container with fresh, uncontaminated water. Mix ratio by volume is one part water to four parts Waterplug. Optimum water temperatu
    + Shipping
  19. EVO-DAMPSEAL - for waterproofing and salt prevention under Acrylic and enamel paint coatings. All bare masonry ands brick surfaces should be given a primer coat of EVO-DAMPSEAL prior to painting. Up to 100mm penetrating coloured, water based static/hydrostatic impregnate tested to 4 bar (60psi). Non toxic, non-caustic, non-flammable, inorganic polyester polymer formulation. Waterproofs, insulates, hardens and preserves Brick, render, mortar and most natural stone permanently. Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, brick fretting, cracking, seepage as it increases the density of the substrate, increases wear capability. APPLICATION FIELDS: All old or new concrete, bricks, blocks, plastering/render and masonry construction. Concrete floors, walls, terrazzo and most natural stone. Above or below ground. Historical monuments, public buildings and new or old constructions affected by pollution. ADVANTAGES: Prevents saponification of paints, does not contain oils or solvents. Prevents blistering. Suitable for Acrylic or Enamel coatings Safe for users and adjacent areas, it does not require special protection equipment. Non-corrosive, non-toxic and non-flammable. Environmentally friendly. Saves hazardous classified materials transportation cost. Problem free bond for paint, floor coverings. Permanently waterproofs and preserves. Suitable over weak and old substrates. SURFACE PREPARATION: Fill all holes and cracks Clean the surface to be treated to remove dust, grease, salts, or unsound particles and loose or cracked paint, to optimize the penetration of EVO-DAMPSEAL Use EVO-SALTAWAY if salts are detected. ALLOW SURFACE TO DRY AS MUCH AS POSSIBLE BEFORE APPLICATION OF EVO-DAMPSEAL. APPLICATION: Apply EVO-DAMPSEAL by low-pressure spray operating at no more than 20 psi, back-pack or hand-spr
    + Shipping
Back to top

Recently Viewed Paints & Coatings


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.