Paints & Coatings | Best Prices in Australia | GetPrice
Showing 1 - 20 of 130 results for

Paints & Coatings

Sort:
  1. Acrylic Student Paint - Flouro Purple (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  2. Acrylic Student Paint - Flouro Yellow (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  3. Penetrating Sealer enhance is a specifically formulated water based penetrating sealer designed to slightly darken and highlight the character and beauty of Coloured Concrete, Unsealed Concrete, Polished Concrete, Granite, Marble, Slate and other natural stone products. Penetrating Sealer Enhance leaves a �slight wet look� appearance without altering the surface characteristics whilst providing excellent water and stain protection. The colour change is slight, if a greater change is required use Enhance AE300. Coverage - Approx 7sq.m per Litre Applying : 2 coat product · Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated. · The surface must be clean but can be damp. · A damping spray of water on concrete and porous substrates prior to coating improves the penetration and increases the stain protection on these surfaces · Apply liberal coating of Penetrating Sealer Enhance using brush, roller or low pressure spray · Leave for 20 minutes then reapply a second coat whilst still wet Leave the coating to penetrate the surface for 5-30minutes, required colour is dependent on time / penetration · Wipe off excess with clean cloth prior to the Sealer Enhance fully drying. · Do not allow excess to fully dry on the surface as it may result in a residue that will need to be mechanically removed.
    + Shipping
  4. a unique industrial strength efflorescence (salt) remover especially formulated for industrial, commercial and residential use. EVO-SALTAWAY allows effective removal of efflorescence without harmful effects to the environment. It is ideal for general removal of efflorescence when cleaning masonry, brick, block structures, walls, floors, historical monuments, public buildings and new or old constructions. It does not attack the surface treated and dissolves efflorescence deposits, allowing removal. It replaces aggressive acid and basic cleaners. Packaging: 2L, 5L&20L Containers PRODUCT DESCRIPTION: EVO-SALTAWAY is an industrial strength efflorescence (SALT) remover specially formulated for industrial, commercial and residential use for concrete and masonry surfaces. Its special non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals, allows effective removal of efflorescence from all masonry surfaces without harmful effects for the environment. ADVANTAGES: APPLICATION FIELDS: General removal of efflorescence. Cleaning of historical monuments, public buildings and new or old constructions affected by efflorescence. Masonry, brick, block structures, walls, floors suffering efflorescence. It does not attack the surface treated. Dissolves efflorescence deposits, allowing removal. Safe for users and adjacent areas, it does not require special protection equipments. Non-flammable. Environmental friendly. Saves costs of hazardous classified materials for transportation. Replaces aggressive acid and basic cleaners. SURFACE PREPARATION: Preparation of the surface Remove all loose material and remove excessive build-up of efflorescence. If required use EVO-POWERCLEAN APPLICATION: APPLY EVO- SALTAWAY by pump spray ensuring a uniform and homogeneous coverage. Apply until “FOAM” begins to appear. Foam only appears when efflorescence is present. Wait 5 minutes, re-apply as required, mechanically agitate and use ze
    + Shipping
  5. This professional spray gun is suitable for painting wood and spray painting cars. There are two guns included for larger or smaller surfaces.
    + Shipping
  6. We're a fast growing retailer of online machinery and hardware. Our product range includes power generators and pressure washers to water pumps. Founded back in 2000, we've established an online reputation for ourselves over the past decade. With 10,000 satisfied transactions on eBay, our success has been the result of positive reviews for our reliable and affordable products. We ship our products fast throughout Australia and strive to create the best customer experience starting from the online experience all the way through to when the product arrives at your door. Many of our popular products are offered with free shipping to make your experience even more enjoyable.
    + Shipping: $50.00
  7. With its mould, mildew and water proof formula, this white paint is ideal for cellar walls and sealing concrete cellars slabs prior to flooring. Comes in a 10L tank.
    + Shipping
  8. MAXPLUG is a quick-setting hydraulic cement that instantly stops running water from cracks holes or other openings in concrete and masonry. It does not contract and sets within three to five minutes depending on the temperature. Once it sets it only add water too use. Uses To seal leaks instantly in concrete surfaces and solid masonry. For emergency repairs on water pipes. For broken pipes sometimes MAXPLUG will even work when the pipes are under pressure. Emergency plugging of gas leaks. To anchor bolts and other accessories that require immediate use. In basements tunnels and sewers to stop water under pressure. Advantages The coating allows the base to transpire and thereby eliminates water vapour. Stops leaks and waterproofs the surface to which it is applied. Does not contract or become weak due to its exothermic reactions. It increases in volume. Its rapid set three to five minutes may be controlled either speed up or slowed down by adding warm or cold water. The setting may even be instantaneous. It is the proper maintenance material for homes and industry. It is not toxic when it comes into contact with drinking water. Its mechanical properties are comparable to those of concrete and in some cases even superior. It sets under water.
    + Shipping
  9. MAXSEAL is a mixture of cements and special additives which together with carefully controlled aggregates gives the coating its waterproofing properties. It is suitable for use on the following surfaces: concrete brick cement mortar and masonry. Uses As a waterproof coating for exterior walls. Basements subjected to water pressure. On foundations to waterproof and protect concrete from water damage. As a waterproof coating for concrete blocks and prefabricated panels. As a decorative waterproof finish for silos and cooling towers in thermal plants. Repairing and waterproofing irrigation channels. As a coating to waterproof dams and retaining walls. To protect and waterproof concrete in water treatment plants. Waterproofing tunnels and shafts. Waterproofing swimming pools. Waterproofing and coating fresh water tanks. Advantages The coating allows the base to transpire and thereby eliminates water vapour. A final coat MAXSEAL may be applied for optimal waterproofing or in lieu of a decorative finish. It is an authentic waterproof coating for exterior surfaces subjected to the elements. For indoor applications especially basements the coating resists hydrostatic pressure from groundwater. It is easy to use and maintenance cost is practically non existent. Resists the corrosive effects of salt water and atmospheric pollution. Longer lasting than paints and other coatings. It forms a structurally inseparable unit with the base as it fills and seals all pores. It has no toxic effect on drinking water. Once it sets can be painted over. It can also beed with ceramic tiles as in swimming pools or decorative outdoor murals.
    + Shipping
  10. MAXPLUG is a quick-setting hydraulic cement that instantly stops running water from cracks holes or other openings in concrete and masonry. It does not contract and sets within three to five minutes depending on the temperature. Once it sets it only add water too use. Uses To seal leaks instantly in concrete surfaces and solid masonry. For emergency repairs on water pipes. For broken pipes sometimes MAXPLUG will even work when the pipes are under pressure. Emergency plugging of gas leaks. To anchor bolts and other accessories that require immediate use. In basements tunnels and sewers to stop water under pressure. Advantages The coating allows the base to transpire and thereby eliminates water vapour. Stops leaks and waterproofs the surface to which it is applied. Does not contract or become weak due to its exothermic reactions. It increases in volume. Its rapid set three to five minutes may be controlled either speed up or slowed down by adding warm or cold water. The setting may even be instantaneous. It is the proper maintenance material for homes and industry. It is not toxic when it comes into contact with drinking water. Its mechanical properties are comparable to those of concrete and in some cases even superior. It sets under water.
    + Shipping
  11. Maxgrip is a mixture of cements and selected special additives and aggregates. A pourable cement-base non-shrinking quick-setting hydraulic compound. Uses: Water/Sewer Management Road/Rail Construction Building/Swimming Pool Industry Bridge Building Councils Heavy Industry Mining Steel Defence Forces. Setting anchor bolts rail posts signposts. Parking meters reinforcing rods and fixtures. Heavy machinery anchoring hooks pulleys. Park seats bridge railings partitions. Safety rails hand rails balustrades. Flag and light poles. Advantages Quick setting - 15 minutes. Stronger than concrete in one hour. Grey Colour matching perfectly with concrete. Makes structurally sound bonds. Add water only - easy use. Waterproofs surface to which it is applied. Non-toxic. Odourless. Ideal for badly ventilated areas. Pourable. Contains no sulphur or Iron particles will not oxidise.
    + Shipping
  12. Maxgrip is a mixture of cements and selected special additives and aggregates. A pourable cement-base non-shrinking quick-setting hydraulic compound. Uses: Water/Sewer Management Road/Rail Construction Building/Swimming Pool Industry Bridge Building Councils Heavy Industry Mining Steel Defence Forces. Setting anchor bolts rail posts signposts. Parking meters reinforcing rods and fixtures. Heavy machinery anchoring hooks pulleys. Park seats bridge railings partitions. Safety rails hand rails balustrades. Flag and light poles. Advantages Quick setting - 15 minutes. Stronger than concrete in one hour. Grey Colour matching perfectly with concrete. Makes structurally sound bonds. Add water only - easy use. Waterproofs surface to which it is applied. Non-toxic. Odourless. Ideal for badly ventilated areas. Pourable. Contains no sulphur or Iron particles will not oxidise.
    + Shipping
  13. Siloxane clear is an oligomeric siloxane. When applied to concrete brick and natural stone facades it provides a waterproof finish without altering the outward appearance.
    + Shipping
  14. MAXSEAL is a mixture of cements and special additives which together with carefully controlled aggregates gives the coating its waterproofing properties. It is suitable for use on the following surfaces: concrete brick cement mortar and masonry. Uses As a waterproof coating for exterior walls. Basements subjected to water pressure. On foundations to waterproof and protect concrete from water damage. As a waterproof coating for concrete blocks and prefabricated panels. As a decorative waterproof finish for silos and cooling towers in thermal plants. Repairing and waterproofing irrigation channels. As a coating to waterproof dams and retaining walls. To protect and waterproof concrete in water treatment plants. Waterproofing tunnels and shafts. Waterproofing swimming pools. Waterproofing and coating fresh water tanks. Advantages The coating allows the base to transpire and thereby eliminates water vapour. A final coat MAXSEAL may be applied for optimal waterproofing or in lieu of a decorative finish. It is an authentic waterproof coating for exterior surfaces subjected to the elements. For indoor applications especially basements the coating resists hydrostatic pressure from groundwater. It is easy to use and maintenance cost is practically non existent. Resists the corrosive effects of salt water and atmospheric pollution. Longer lasting than paints and other coatings. It forms a structurally inseparable unit with the base as it fills and seals all pores. It has no toxic effect on drinking water. Once it sets can be painted over. It can also beed with ceramic tiles as in swimming pools or decorative outdoor murals.
    + Shipping
  15. Siloxane clear is an oligomeric siloxane. When applied to concrete brick and natural stone facades it provides a waterproof finish without altering the outward appearance.
    + Shipping
  16. Acrylic Student Paint - Flouro Blue (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  17. Acrylic Student Paint - Flouro Green (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  18. Acrylic Student Paint - Flouro Orange (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  19. Acrylic Student Paint - Flouro Pink (2 Litres)We sell these paints to educational institutions Australia-wide. They are non-toxic, water based paints and have a matt finish. These pants conform to Australian Standards 1647.3 and are manufactured in Australia. Perfect for childcare centres and schools!
    + Shipping
  20. PENETRATING STAIN PROOF SEALER Concrete, bricks and natural stone are versatile cost effective construction materials with a serious defect, they are porous. Water and water soluble contaminants can be readily absorbed initiating a process of deterioration, starting with efflorescence, salt damage, mould and mildew, corrosion of steel reinforcing and eventually erosion of the surface. This is all preventable with the use of Impregnating Sealers, Penetrating Sealers and Surface Sealers, all of which are designed to protect, beautify and enhance the structure whether it is a residence, monument, block of units or a bridge. Sealers will extend the life of these structures and add value as they age beautifully instead of crumbling with erosion. Photograph showing the effect of water droplets on a paver. Only the bottom half was treated with Penetrating Stain Proof Sealer, the top left natural. The paver was then placed in a tray of water, and water was dropped onto the treated and untreated surfaces. The water is prevented from penetrating the surface and from absorbing into the paver by Penetrating Sealer. ---------------------------------------------------------------------------------------------------------------------------------- The top half is darkened by water absorption and the droplets adsorbed immediately. ---------------------------------------------------------------------------------------------------------------- Features of Penetrating Stain Proof Sealer · Seals Concrete, Terracotta, Unglazed Tiles, Pavers, Sandstone and other natural rock against water damage and staining. · Protects against permanent staining from oil, grease, food, red wine, graffiti and posters Can be applied to damp stone Coverage - Approx 7sq.m per Litre · Eliminates the occurrence of Efflorescence. · Reduces Moss, mould and algae growth. · Reduces corrosion attack on steel reinforcing. · Retains a natural look. · Breathable, allows water vapour to escape. · Deep penetrating. · Al
    + Shipping
Back to top

Recently Viewed Paints & Coatings


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.