Steel Items trench mesh | Best Prices in Australia | GetPrice
Showing 1 - 17 of 17 results for

Steel Items trench mesh

Sort:
  1. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  2. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  3. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  4. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  5. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  6. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  7. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  8. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  9. All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
    + Shipping
  10. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  11. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  12. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  13. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  14. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  15. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  16. Designed for use to support between different slab levels or for the lower strip of trench mesh in a thickened edge beam is required.
    + Shipping
  17. Trench Mesh Supports are the ideal system for placing trench mesh and maintaining concrete cover to the reinforcement. Trench Mesh Supports save time and keep the reinforcement securely in position during the concrete pour "150" src="/images/tms.gif" width="535" /> The trench mesh support is suitable for use with L8TM L11TM L12TM trench mesh and Y12 bars. The trench mesh support is clipped on to the trench mesh before lowering into the trench. Positive grip ensures correct cover - no lifting required during the concrete pour. Trench Mesh Supports help maintain correct minimum bottom and edge cover. Trench Mesh Supports compensate for any unevenness in the excavation. Supports are approximately 60 mm in height.
    + Shipping
Back to top

Recently Viewed Steel Items


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.