Samsonite Guardit 2.0 reinvents the core functionality of personal mobility with a brand new design, combining the convenience of an everyday laptop-carrying bag with an even sleeker and professional
RAM® Ball Adapter for Fusion Stereoactive (C-Size) Description: The RAM Mounts Fusion StereoActive adaptor connects your waterproof, Bluetooth speaker anywhere on your boat, camper or wherever you want it using RAM Mounts. The C-sized adapter will work with the RAM Mounts gear you already have....
Plate, ball and clamp system for mounting anything to anything. Designed with a RAM 1.5 inch diameter patented rubber ball and socket system that has adjustment point at the cradle bases.
RAM® Drill-Down Marine Electronic Mount with Cable Manager Complete flat surface, drill-down mounting solution with an overall height of 7.35"; RAM® ball and socket technology allows for near-infinite adjustability Includes RAM® cable manager to route electrical wiring and cover installation holes...
1.5" ball with 2" X 6.25" plate and B size arm. Matches most Garmin marine units, and other devices.
RAM Rod Holders are the culmination of superior design and materials resulting in the success of recreational and tournament fisherman alike. Comprised of ultra-durable composites, stainless steel, and brass hardware you need not worry about corrosion, just how you are going to enjoy your time on...
The RAM-137BU, universal mounting plate, consists of a 1.5" diameter rubber ball, connected at right angles to a flat 3" x 11" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB...
RAM® Double Socket Arm with RAM® Pin-Lock™ 5-Pin Security Knob Standard RAM® double socket arm provides an ideal overall length of 5.5" and a socket-to-socket length of 4.66"; includes RAM® Pin-Lock™ security knob and key Attaches to any C size RAM® ball component, including mounting bases and...
Double socket arm with metal tightening knob, which has a socket at either end to fit a B-sized 1.5 inch ball. Overall Length: 5.625" Socket-To-Socket Length: 4.5
RAM® Long Double Socket Arm Provides an extended reach with an overall length of 9.125" and a socket-to-socket length of 8" Attaches to any C size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM®...
The RAM-202-153-202 consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
The RAM-202-24-202U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost...
Rectangular plate base 2 x 4 inches with a 1.5 inch ball. This mount has pre-drilled holes at each corner of the base plate.
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Compatible Models: Lowrance Elite-5 Lowrance Elite-5...
Ram 1.5" ball with 2.5" base with standard AMPS hole pattern, and marine pattern. This part is slightly different than the usual ball mount - it has a female 5/16"-18 hole in the bottom.
The RAM-202U-RYM1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the...
RAM® Tripod Base with Ball Description Three legs attach to the RAM-202 evenly around the 2.5" diameter plate. The legs are connected by screws that fit through the holes on the RAM-202. There are wing nuts on the end of the screw so they can be tightened by hand. At the top of the RAM-202 is a...
C-sized 1.5" Ball with Male 0.5" NPT Threaded Post. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible with other NPT parts of the same size.
RAM Mount Aluminum 1.5 inch Double or Triple Ball on 2.5 inch Base with 0.62 inch Hole.
Double 1.5" standard ball with female 1/2" NPT thread. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible with other NPT parts of the same size.
Consists of a 1.5" ball and 0.5" NPT female thread. This part connects to the RAM-PA82xx series with a 1/2" NPT thread, and then connects to any RAM part with the 1.5" socket. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible...