Samsonite Guardit 2.0 reinvents the core functionality of personal mobility with a brand new design, combining the convenience of an everyday laptop-carrying bag with an even sleeker and professional
Camera base consists of a 1.5 inch (38mm) diameter rubber ball, connected at right angles to a 2.5 inch diameter round base with 3/8 inch-16 stainless steel male thread.
The RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
RAM Rail Base with Zing Coated U-Bolt, ATV/UTV Strap & 1.5" Ball for Rails to 3.15" in Diameter About: Designed for a clean installation, RAM-231Z-2U base accommodates most common tubing sizes on UTV’s and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap...
2.5" diameter base with 1/2" NPT female thread at a 90 degree angle to the base. This part connects to any 1/2" NPT male thread, including the RAM-PA82XX rigid arm series.
RAM® Double U-Bolt Ball Base for 1.25" - 1.5" Rails Zinc-coated double U-bolt base accommodates rails from 1.25" to 1.5" in diameter Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability...
RAM 2 to 2.5" Diameter rail base with 1.5" (38mm) ball.
Ram 1.5" ball with 2.5" base with standard AMPS hole pattern, and marine pattern. This part is slightly different than the usual ball mount - it has a female 5/16"-18 hole in the bottom.
1.5" (38mm) ball connected to a 4.75" square plate with 4 x 100mm holes and 4 x 75mm holes at each corner.
The RAM-351 RAM rod ball adapter turns any bulk head, flush mount, or deck track base into the ultimate mounting location with a C-sized rubber ball.
A 5" x 5" single cast mounting base with central spigot for RAM-290 and other post-type systems.For a multi-angle equivalent, check the RAM-281 and RAM-282 parts.
A 38mm (1.5") ball with 1/4" standard camera adaptor thread (20 TPI).
The RAM Torque handlebar and rail mounting base has a 1.5" rubber ball and accommodates bars 3/4" to 1" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting...
RAM Forklift Overhead Guard Plate with C Size 1.5" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with...
This 18" Long Rigid Aluminum 1/4" diameter Pipe is powder coated and has a 1/4" NPT Male thread at either end. These arms are used for many of the Lap Top Tray Mounting Systems. They are rigid pipes that can securely hold many different types of weights. Please note that these NPT threads are...
45cm long aluminium pipe with male thread at either end. The pipe is rigid and is used as a pedestal to gain height in mobile installations, such as for a RAM laptop tray system. Separate bases are available for this pipe, such as the RAM-290, RAM-2461, or RAM-134-90.
RAM® Single Socket Arm with Round Plate Swiveling single socket arm allows for 360-degree rotation on 2.5" round base featuring the industry-standard AMPS hole pattern Compatible with C size RAM® ball components Made of high-strength composites for durability and reliability in the most demanding...
The RAP-354-TRA1 RAM Track Adapter Base with 1.5 inch RAM rubber ball has a T-Slot attachment on the bottom, allowing it to attach to track rails found on many kayaks. Simply twist the ball clockwise to tighten, and counterclockwise to loosen and adjust the positioning.
RAM® Tough-Claw™ Locking Large Clamp Ball Base The RAM Locking Tough-Claw™ is the perfect mounting base for quick and easy installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from insert clamping range here in outer diameter. Ideal for...
Works with holes from 2.22cm - 2.54cm diameter and secures tightly. Slide the wedge into the round opening of the sail port or rod base and tighten. Doesn't require any drilling. Compatible with Scotty, Fish-On, and Hobie Kayaks with sail mount ports that meet the above size diameter.
Large C-sized Tough-Claw with standard double socket arm and circular base plate. Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round,...