Shop now. New deals everyday!
Screw Pack to suit RAP-224-1U Pair of replacement screws to suit the RAP-224-1U, for attaching the diamond plate to the plastic suction.
Plastic quarter moon sleeve to broaden grip of 231 type U bolts.
The High Strength Composite Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from center to center, positioned at either tip of the diamond plate. This base plate will attach to any...
RAM-to-Garmin double ball short arm adapter. Connect the RAM Snap-Link to Garmin G-Ball. Overall length: 3.63cm. Note: This arm will only work with Snap-Link Mounting Systems. It will not work with the RAM Rubber ball and socket systems.
The RAP-274-1BU is the cradle connector that is included with the RAM EZ ON/OFF High Strength Plastic Composite Handlebar Rail Mount. This extra connector allows you to connect a second cradle to the EZ ON/OFF mounting base.
The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin G-Ball. The overall length of the LONG arm adapter is 3 inches.
RAM® Universal Hardware Pack - #8-32 Screws & Nylock Nuts The RAM® Universal Hardware Pack - #8-32 Screws & Nylock Nuts (RAM-HAR-COM-NCU) features our most commonly used hardware. Skip the guessing game at the hardware store and opt for this universal set of screws and nylock nuts. Includes: (2)...
Zinc Coated U-Bolt Hardware Pack, accommodates Rails 0.5" to 1.25". Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
The rust proof metal u-bolt replacement accommodates rails in diameter from 1" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt.
RAM® Swing Arm Knob RAM® Swing Arm Knob with 3/8"-16 Brass threaded insert. Made of high strength composite, commonly used for tightening down between to swing arms, among other uses.
A rail mount designed to fit rails up to approx 2.6cm in diameter. The plastic diamond plate swivels, and can be tightened once the desired position has been achieved. Connects to any of the RAM Composite HOL Cradles or any other cradle with two holes positioned 1.912" center to center.
Universal plate with a 1.0" diameter rubber ball, on a diamond plate. Will attach to any RAM plastic holder.
RAM® Quick-Grip™ Replacement Hardware Pack The RAM® Quick-Grip™ Replacement Hardware Pack (RAM-HAR-PDXU) includes the necessary hardware and arms for the RAM® Quick-Grip™ collection (RAM-HOL-PD3U/RAM-HOL-PD4U). Includes: (4) RAM® Quick-Grip™ Fingers (4) #6-32 x 3/8" Machine Screws (4) #6-32 Nylock...
RAM® Pin-Lock™ Ball Adapter This ball adapter features the RAM® Pin-Lock™ hole pattern for use with RAM® Tough-Claw™ and RAM Tough-Clamp™ products. It features a 1" B size rubber ball that’s compatible with a variety of B size RAM® double socket arms.
RAM® Hardware & Spacer Pack for Torque™ Medium Rail Base The RAM® Hardware & Spacer Pack for Torque™ Medium Rail Base (RAM-HAR-408-75-1U) contains everything needed to install the RAM® Torque™ Medium Rail Base (RAM-B-408-75-1U & RAM-408-75-1U). Whether you've lost your hardware or need to update...
RAM® Hardware & Spacer Pack for Torque™ Small Rail Base The RAM® Hardware & Spacer Pack for Torque™ Small Rail Base (RAM-HAR-408-37-62U) contains everything needed to install the RAM® Torque™ Small Rail Base (RAM-B-408-37-62U). Whether you've lost your hardware or need to update it, avoid guessing...
RAM® Diamond Ball Base Diamond plate features industry-standard AMPS hole pattern and measures 2.43" x 1.31" Compatible with several RAM® device holders and cradles; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and...
Belt clip to hold most RAM holder cradles that have the RAP-272U or RAP-277 attached to them.
The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration...
The RAM-B-337U includes a 1/4 inch-20 female thread hex hole connected to a 1 inch ("B" size) rubber ball.